International Journal of Rotating Machinery

Table of Contents: 2005

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 395962

Investigation of the Unsteady Flow Generated by an Axial Fan: Experimental Testing and Simulations

R. S. Amano | E. K. Lee | ... | Jianhui Xie
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 345857

Numerical Modelization of the Flow in Centrifugal Pump: Volute Influence in Velocity and Pressure Fields

Miguel Asuaje | Farid Bakir | ... | Robert Rey
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 403715

The Computation of Flow and Heat Transfer through an Orthogonally Rotating Square-Ended U-Bend Using Low-Reynolds-Number Models

Konstantinos-Stephen P. Nikas | Hector Iacovides
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 591329

Identifying and Minimising Uncertainty for Experimental Journal Bearing Studies

G. D. Wale | D. Mba
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 535907

Systematic Investigation on Conjugate Heat Transfer Rates of Film Cooling Configurations

Dieter Bohn | Jing Ren | Karsten Kusterer
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 278259

Investigation of the Optimum Clocking Position in a Two-Stage Axial Turbine

Dieter Bohn | Sabine Ausmeier | Jing Ren
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 215460

Thermal Fluid Flow Transport Phenomenon in Unsteady Rotating Drum during Spin-Down Process

Shuichi Torii | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 615405

Development and Design of a Centrifugal Compressor Volute

Cheng Xu | Michael Müller
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 323789

Experimental and Numerical Investigations of a Flexible Rotor on Flexible Bearing Supports

J.-J. Sinou | C. Villa | F. Thouverez
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 562654

Numerical Simulation of Multiplicity and Stability of Mixed Convection in Rotating Curved Ducts

Liqiu Wang | Tianliang Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 637194

Optimization of Hydraulic Machinery Bladings by Multilevel CFD Techniques

Susanne Thum | Rudolf Schilling
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 463582

Numerical Simulation of Turbulent Fluid Flow and Heat Transfer in a Ribbed Rotating Two-Pass Square Duct

Tong-Miin Liou | Shih-Hui Chen | Yi-Chen Li
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 634973

Application of Evolutionary Algorithms and Statistical Analysis in the Numerical Optimization of an Axial Compressor

Alberto Clarich | Giovanni Mosetti | ... | Carlo Poloni
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 752538

Numerical Simulation of Turbopump Inducer Cavitating Behavior

O. Coutier-Delgosha | P. Morel | ... | JL. Reboud
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2005
  • - Article ID 786280

Synchronous Analysis for Diagnostics of Rolling Bearings in the Turbojet Engine

Zdzislaw Gosiewski | Andrzej Romaniuk
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit