International Journal of Rotating Machinery

Table of Contents: 2007

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 076476
  • - Research Article

Analysis of Geometries' Effects on Rotating Stall in Vaneless Diffuser with Wavelet Neural Networks

Chuang Gao | Chuangang Gu | ... | Bo Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 034901
  • - Research Article

Influence of Impeller Geometry on the Unsteady Flow in a Centrifugal Fan: Numerical and Experimental Analyses

M. Younsi | F. Bakir | ... | R. Rey
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 048683
  • - Research Article

Numerical Analysis of Blade Geometry Generation Techniques for Centrifugal Compressors

Florin Iancu | John Trevino | Steven Sommer
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 051598
  • - Research Article

Effect of Blade Profile on the Performance of Wells Turbine under Unidirectional Sinusoidal and Real Sea Flow Conditions

A. Thakker | R. Abdulhadi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 072697
  • - Research Article

Vortex Simulation of the Bubbly Flow around a Hydrofoil

Tomomi Uchiyama | Tomohiro Degawa
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 085275
  • - Research Article

Optimization Design and Experimental Study of Low-Pressure Axial Fan with Forward-Skewed Blades

Li Yang | Ouyang Hua | Du Zhao-Hui
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 068684
  • - Research Article

A New Statistical-Based Correlation for the Rib Fin Effects on the Overall Heat Transfer Coefficient in a Rib-Roughened Cooling Channel

M. E. Taslim | V. Nezym
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 056808
  • - Research Article

Active Suppression of Rotating Stall Inception with Distributed Jet Actuation

Huu Duc Vo
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 083641
  • - Research Article

Numerical Flow Simulation in a Centrifugal Pump at Design and Off-Design Conditions

K. W. Cheah | T. S. Lee | ... | Z. M. Zhao
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 029270
  • - Research Article

Investigations on the Blade Vibration of a Radial Inflow Micro Gas Turbine Wheel

Shijie Guo
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 075762
  • - Research Article

Experimental and Numerical Investigations of a Dual-Shaft Test Rig with Intershaft Bearing

M. Guskov | J.-J. Sinou | ... | O. S. Naraikin
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 091276
  • - Research Article

Suppression of Base Excitation of Rotors on Magnetic Bearings

Steven Marx | C. Nataraj
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 027247
  • - Research Article

A Class of Methods for the Analysis of Blade Tip Timing Data from Bladed Assemblies Undergoing Simultaneous Resonances—Part I: Theoretical Development

J. Gallego-Garrido | G. Dimitriadis | J. R. Wright
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 073624
  • - Research Article

A Class of Methods for the Analysis of Blade Tip Timing Data from Bladed Assemblies Undergoing Simultaneous Resonances—Part II: Experimental Validation

J. Gallego-Garrido | G. Dimitriadis | ... | J. R. Wright
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2007
  • - Article ID 056097
  • - Review Article

Numerical Investigation on the Influence of Hot Streak Temperature Ratio in a High-Pressure Stage of Vaneless Counter-Rotating Turbine

Zhao Qingjun | Wang Huishe | ... | Xu Jianzhong
International Journal of Rotating Machinery
 Journal metrics
See full report
Acceptance rate13%
Submission to final decision86 days
Acceptance to publication16 days
CiteScore2.300
Journal Citation Indicator0.290
Impact Factor0.9
 Submit Check your manuscript for errors before submitting

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.