International Journal of Rotating Machinery

Table of Contents: 2009

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 247613
  • - Research Article

Performance Improvement of Axial Compressors and Fans with Plasma Actuation

Sebastien Lemire | Huu Duc Vo | Michael W. Benner
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 787145
  • - Research Article

Study of Sweep and Induced Dihedral Effects in Subsonic Axial Flow Compressor Passages—Part I: Design Considerations—Changes in Incidence, Deflection, and Streamline Curvature

P. V. Ramakrishna | M. Govardhan
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 537802
  • - Research Article

Effects of Different Blade Angle Distributions on Centrifugal Compressor Performance

Pekka Röyttä | Aki Grönman | ... | Jari Backman
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 704845
  • - Research Article

Experimental Investigation of the Effect of Radial Gap and Impeller Blade Exit on Flow-Induced Vibration at the Blade-Passing Frequency in a Centrifugal Pump

A. Al-Qutub | A. Khalifa | Y. Khulief
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 758108
  • - Review Article

A Brief Review on Dynamics of a Cracked Rotor

Chandan Kumar | Vikas Rastogi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 936251
  • - Research Article

Systems Design, Fabrication, and Testing of a High-Speed Miniature Motor for Cryogenic Cooler

Dipjyoti Acharya | Lei Zhou | ... | Nagaraj K. Arakere
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 718107
  • - Research Article

An Advanced Microturbine System with Water-Lubricated Bearings

Susumu Nakano | Tadaharu Kishibe | ... | Hiroyuki Shiraiwa
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 313526
  • - Research Article

A Modal-Based Substructure Method Applied to Nonlinear Rotordynamic Systems

Helmut J. Holl
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 709754
  • - Research Article

Some Considerations about the Rotating Cell Structure

Franco Nurzia | Chiara Palomba | Pierpaolo Puddu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 410838
  • - Research Article

Comparison of Periodic Flow Fields in a Radial Pump among CFD, PIV, and LDV Results

Jianjun Feng | F.-K. Benra | H. J. Dohmen
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 160423
  • - Research Article

Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences

Maosheng Niu | Shusheng Zang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 265198
  • - Research Article

Multiresolution Wavelet Analysis of the Dynamics of a Cracked Rotor

Jerzy T. Sawicki | Asok K. Sen | Grzegorz Litak
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 612723
  • - Research Article

Experimental and Numerical Investigations of Air Cooling for a Large-Scale Motor

Chih-Chung Chang | Chiao-Hung Cheng | ... | Sih-Li Chen
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 349397
  • - Research Article

Numerical Estimation of Torsional Dynamic Coefficients of a Hydraulic Turbine

Martin Karlsson | Håkan Nilsson | Jan-Olov Aidanpää
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2009
  • - Article ID 932593
  • - Research Article

Effect of the Unsteadiness on the Diffuser Flow in a Transonic Centrifugal Compressor Stage

N. Bulot | I. Trébinjac
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit

We are committed to sharing findings related to COVID-19 as quickly and safely as possible. Any author submitting a COVID-19 paper should notify us at help@hindawi.com to ensure their research is fast-tracked and made available on a preprint server as soon as possible. We will be providing unlimited waivers of publication charges for accepted articles related to COVID-19. Sign up here as a reviewer to help fast-track new submissions.