International Journal of Rotating Machinery

Table of Contents: 2011

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 146969
  • - Research Article

Effect of Partial Shrouds on the Performance and Flow Field of a Low-Aspect-Ratio Axial-Flow Fan Rotor

N. Sitaram | G. Ch. V. Sivakumar
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 528927
  • - Research Article

Attenuation of Cross-Flow Fan Noise Using Porous Stabilizers

Huanxin Lai | Meng Wang | ... | Jin Yao
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 782969
  • - Research Article

Aviation Fueling: A Cleaner, Greener Approach

Robert C. Hendricks | Dennis M. Bushnell | Dale T. Shouse
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 841214
  • - Research Article

Numerical Investigation of the Internal Flow in a Banki Turbine

Jesús De Andrade | Christian Curiel | ... | Miguel Asuaje
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 537824
  • - Research Article

Impeller Design of a Centrifugal Fan with Blade Optimization

Yu-Tai Lee | Vineet Ahuja | ... | Roderick M. Coleman
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 516128
  • - Research Article

Blade by Blade Tip Clearance Measurement

A. G. Sheard
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 908469
  • - Review Article

A Review of Tilting Pad Bearing Theory

Timothy Dimond | Amir Younan | Paul Allaire
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 817547
  • - Research Article

Assessment of a Neural-Network-Based Optimization Tool: A Low Specific-Speed Impeller Application

Matteo Checcucci | Federica Sazzini | ... | Matteo Toselli
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 489150
  • - Research Article

An Investigation on the Effect of Endwall Movement on the Tip Clearance Loss Using Annular Turbine Cascade

Hesham M. El-Batsh | Magdy Bassily Hanna
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 182906
  • - Research Article

Development of a Method for Enhanced Fan Representation in Gas Turbine Modeling

Georgios Doulgeris | Hossein Khaleghi | ... | Pericles Pilidis
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 352819
  • - Research Article

Secondary Flow Loss Reduction in a Turbine Cascade with a Linearly Varied Height Streamwise Endwall Fence

Krishna Nandan Kumar | M. Govardhan
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 738275
  • - Research Article

Design and Characterization of a Centrifugal Compressor Surge Test Rig

Kin Tien Lim | Se Young Yoon | ... | Paul E. Allaire
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 131824
  • - Research Article

Air Pressure-Assisted Centrifugal Dewatering of Concentrated Fine Sulfide Particles

R. Asmatulu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 415296
  • - Research Article

Particulate Emissions Hazards Associated with Fueling Heat Engines

Robert C. Hendricks | Dennis Bushnell
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 2011
  • - Article ID 137860
  • - Research Article

Research on Pump Volute Design Method Using CFD

Sunsheng Yang | Fanyu Kong | Bin Chen
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit

We are committed to sharing findings related to COVID-19 as quickly and safely as possible. Any author submitting a COVID-19 paper should notify us at help@hindawi.com to ensure their research is fast-tracked and made available on a preprint server as soon as possible. We will be providing unlimited waivers of publication charges for accepted articles related to COVID-19. Sign up here as a reviewer to help fast-track new submissions.