Table of Contents
International Journal of Vehicular Technology
Volume 2008 (2008), Article ID 859571, 8 pages
http://dx.doi.org/10.1155/2008/859571
Research Article

Fault-Tolerant Control of the Road Wheel Subsystem in a Steer-By-Wire System

1GE Aviation, Cincinnati, OH 45246, USA
2Department of Mechanical Engineering, Purdue School of Engineering & Technology, IUPUI, Indianapolis, IN 46202, USA

Received 22 June 2007; Revised 10 December 2007; Accepted 22 January 2008

Academic Editor: Maode Ma

Copyright © 2008 Bing Zheng and Sohel Anwar. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Ackermann and T. Bünte, “Automatic car steering control bridges over the driver reaction time,” Kybernetika, vol. 33, no. 1, pp. 61–74, 1997. View at Google Scholar
  2. J. Kasselmann and T. Keranen, “Adaptive steering,” Bendix Technical Journal, vol. 2, pp. 26–35, 1969. View at Google Scholar
  3. J. Ackermann, “Yaw disturbance attenuation by robust decoupling of car steering,” in Proceedings of the 13th World IFAC Congress (IFAC '96), San Francisco, Calif, USA, July 1996.
  4. K. Huh and J. Kim, “Active steering control based on the estimated tire forces,” Journal of Dynamic Systems, Measurement and Control, vol. 123, no. 3, pp. 505–511, 2001. View at Publisher · View at Google Scholar
  5. M. Segawa, K. Nishizaki, and S. Nakano, “A Study of vehicle stability control by steer-by-wire system,” in Proceeding of the 5th International Symposium on Advanced Vehicle Control (AVEC '00), Ann Arbor, Mich, USA, August 2000.
  6. B. Zheng, P. Oh, and B. Lenart, “Active steering control with front wheel steering,” in Proceedings of the American Control Conference (ACC '04), vol. 2, pp. 1475–1480, Boston, Mass, USA, June-July 2004.
  7. B. Zheng, C. Altemare, and S. Anwar, “Fault tolerant steer-by-wire road wheel control system,” in Proceedings of the American Control Conference (ACC '05), vol. 3, pp. 1619–1624, Portland, Ore, USA, June 2005. View at Publisher · View at Google Scholar
  8. B. Zheng and N.-S. Hsu, “Single-input-single-output system identification via block-pulse functions,” International Journal of Systems Science, vol. 13, no. 6, pp. 697–702, 1982. View at Publisher · View at Google Scholar
  9. B. Zheng and N.-S. Hsu, “Analysis and parameter estimation of bilinear system via block-pulse function,” International Journal of Control, vol. 36, no. 1, pp. 53–65, 1982. View at Publisher · View at Google Scholar
  10. E. Bakker, L. Nyborg, and H. Pacejka, “Tyre modelling for use in vehicle dynamics studies,” Society of Automotive Engineers, Warrendale, Pa, USA, 1987. View at Google Scholar
  11. S. Anwar and L. Chen, “An analytical redundancy-based fault detection and isolation algorithm for a road-wheel control subsystem in a steer-by-wire system,” IEEE Transactions on Vehicular Technology, vol. 56, no. 5, part 2, pp. 2859–2869, 2007. View at Publisher · View at Google Scholar
  12. P. Riekert and T. E. Schunck, “Zur Fahrmechanik des gummibereiften Kraftfahrzeugs,” Ingenieur Archiv, vol. 11, no. 3, pp. 210–224, 1940. View at Publisher · View at Google Scholar