Table of Contents
International Journal of Vehicular Technology
Volume 2015 (2015), Article ID 136437, 12 pages
http://dx.doi.org/10.1155/2015/136437
Research Article

Power Flows and Efficiency of Output Compound e-CVT

Dipartimento di Meccanica, Matematica e Management, Politecnico di Bari, Viale Japigia 182, 70125 Bari, Italy

Received 9 April 2015; Revised 15 July 2015; Accepted 20 August 2015

Academic Editor: Shankar Subramanian

Copyright © 2015 Francesco Bottiglione and Giacomo Mantriota. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. R. Cuddy and K. B. Wipke, “Analysis of the fuel economy benefit of drivetrain hybridization,” SAE Technical Paper 970289, 1997. View at Publisher · View at Google Scholar
  2. S. Stockar, V. Marano, M. Canova, G. Rizzoni, and L. Guzzella, “Energy-optimal control of plug-in hybrid electric vehicles for real-world driving cycles,” IEEE Transactions on Vehicular Technology, vol. 60, no. 7, pp. 2949–2962, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. L. Serrao, S. Onori, and G. Rizzoni, “A comparative analysis of energy management strategies for hybrid electric vehicles,” Journal of Dynamic Systems, Measurement and Control, vol. 133, no. 3, Article ID 031012, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. F. R. Salmasi, “Control strategies for hybrid electric vehicles: evolution, classification, comparison, and future trends,” IEEE Transactions on Vehicular Technology, vol. 56, no. 5, pp. 2393–2404, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Bottiglione, T. Contursi, A. Gentile, and G. Mantriota, “The fuel economy of hybrid buses: the role of ancillaries in real urban driving,” Energies, vol. 7, no. 7, pp. 4202–4220, 2014. View at Publisher · View at Google Scholar
  6. A. Taghavipour, N. L. Azad, and J. McPhee, “An optimal power management strategy for power split plug-in hybrid electric vehicles,” International Journal of Vehicle Design, vol. 60, no. 3-4, pp. 286–304, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. Z. Zhao, C. Wang, T. Zhang, X. Dai, and X. Yuan, “Control optimization of a compound power-split hybrid transmission for electric drive,” SAE Technical Papers, 2015. View at Publisher · View at Google Scholar
  8. G. Mantriota, “Performances of a series infinitely variable transmission with type I power flow,” Mechanism and Machine Theory, vol. 37, no. 6, pp. 579–597, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Mantriota, “Performances of a parallel infinitely variable transmissions with a type II power flow,” Mechanism and Machine Theory, vol. 37, no. 6, pp. 555–578, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. B. Si, “Reconfigurable Hybrid Gear Train,” US Patent 0 070 992 A1, 2011.
  11. B. Si, “Dual mode input split compound split configuration EPPV transmission,” U.S. Patent 8 075 435 B2, 2011.
  12. F. Bottiglione and G. Mantriota, “MG-IVT: an infinitely variable transmission with optimal power flows,” Journal of Mechanical Design, vol. 130, no. 11, Article ID 112603, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. K. T. Chau and W. Li, “Overview of electric machines for electric and hybrid vehicles,” International Journal of Vehicle Design, vol. 64, no. 1, pp. 46–71, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. A. G. Holmes and M. R. Schmidt, “Hybrid Electric Powertrain Including a Two-Mode Electrically Variable Transmission,” US Patent 6 478 705 B1, 2002.
  15. C. Brendan, “Comparative analysis of single and combined hybrid electrically variable transmission operating modes,” SAE Technical Paper 2005-01-1165, 2005. View at Google Scholar
  16. B. Mashadi and S. A. M. Emadi, “Dual-mode power-split transmission for hybrid electric vehicles,” IEEE Transactions on Vehicular Technology, vol. 59, no. 7, pp. 3223–3232, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Kim, J. Kang, Y. Kim, T. Kim, B. Min, and H. Kim, “Design of power split transmission: design of dual mode power split transmission,” International Journal of Automotive Technology, vol. 11, no. 4, pp. 565–571, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Zou, F.-C. Sun, C.-N. Zhang, and J.-Q. Li, “Optimal energy management strategy for hybrid electric tracked vehicles,” International Journal of Vehicle Design, vol. 58, no. 2–4, pp. 307–324, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. N.-D. Kim, J.-M. Kim, and H.-S. Kim, “Control strategy for a dual-mode electromechanical, infinitely variable transmission for hybrid electric vehicles,” Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, vol. 222, no. 9, pp. 1587–1601, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Kim, T. Kim, B. Min, S. Hwang, and H. Kim, “Mode control strategy for a two-mode hybrid electric vehicle using electrically variable transmission (EVT) and fixed-gear mode,” IEEE Transactions on Vehicular Technology, vol. 60, no. 3, pp. 793–803, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. Z. Zhou, C. Mi, and G. Zhang, “Integrated control of electromechanical braking and regenerative braking in plug-in hybrid electric vehicles,” International Journal of Vehicle Design, vol. 58, no. 2–4, pp. 223–239, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. F. Bottiglione and G. Mantriota, “Reversibility of power-split transmissions,” Journal of Mechanical Design, Transactions of the ASME, vol. 133, no. 8, Article ID 084503, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. F. Bottiglione and G. Mantriota, “Effect of the ratio spread of CVU in automotive kinetic energy recovery systems,” Journal of Mechanical Design, Transactions of the ASME, vol. 135, no. 6, Article ID 061001, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. F. Bottiglione, G. Carbone, L. De Novellis, L. Mangialardi, and G. Mantriota, “Mechanical hybrid KERS based on toroidal traction drives: an example of smart tribological design to improve terrestrial vehicle performance,” Advances in Tribology, vol. 2013, Article ID 918387, 9 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. S. De Pinto, F. Bottiglione, and G. Mantriota, “Infinitely variable transmissions in neutral gear: torque ratio and power re-circulation,” Mechanism and Machine Theory, vol. 74, pp. 285–298, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. S. de Pinto and G. Mantriota, “A simple model for compound split transmissions,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 228, no. 5, pp. 549–564, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. G. Mantriota, “Fuel consumption of a vehicle with power split CVT system,” International Journal of Vehicle Design, vol. 37, no. 4, pp. 327–342, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Cammalleri, “Efficiency of split-way CVT's. A simplified model,” SAE Technical Papers 15, 2007. View at Google Scholar