Table of Contents
ISRN Civil Engineering
Volume 2011 (2011), Article ID 138149, 5 pages
http://dx.doi.org/10.5402/2011/138149
Research Article

Industrial Wastes in Soil Improvement

Department of Civil Engineering, S.R.K. Institute of Technology, Enikepadu, Vijayawada 521108, Andhra Pradesh, India

Received 11 June 2011; Accepted 18 July 2011

Academic Editors: M. Maslehuddin and D. Zeng

Copyright © 2011 G. V. Rama Subbarao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. IPSIT, “Precipitated silica from rice husk ash,,” Indian Institute of Science Precipitated Silica Technology, Combustion, Gasification & Propulsion Laboratory (CGPL), Bangalore, India,http://cgpl.iisc.ernet.in/site/Portals/0/Technologies/PrecipitatedSilica.pdf.
  2. A. Muthadhi, R. Anitha, and S. Kothandaraman, “Rice husk ash- properties and its uses: a review,” Journal of the Institution of Engineers, vol. 88, pp. 50–56, 2007. View at Google Scholar · View at Scopus
  3. A. S. Muntohar, “Utilization of uncontrolled burnt RHA in soil improvement,” Dimensi Teknik Sipil, vol. 4, no. 2, pp. 100–105, 2002. View at Google Scholar
  4. M. Alhassan, “Potentials of rice husk ash for soil stabilization,” Assumption University Journal of Technology, vol. 11, no. 4, pp. 246–250, 2008. View at Google Scholar
  5. F. O. Okafor and U. N. Okonkwo, “Effects of rice husk Ash on some geotechnical properties of lateritic soil,” Leonardo Electronic Journal of Practices and Technologies, no. 15, pp. 67–74, 2009. View at Google Scholar · View at Scopus
  6. R. M. Brooks, “Soil stabilization with fly ash and rice husk ash,” International Journal of Research and Reviews in Applied Sciences, vol. 1, no. 3, pp. 209–217, 2009. View at Google Scholar
  7. A. S. Muntohar and G. Hantoro, “Influence of rice husk ash and lime on engineering properties of a clayey subgrade,” Electronic Journal of Geotechnical Engineering, vol. 5, pp. 1–9, 2000. View at Google Scholar
  8. J. N. Jha and K. S. Gill, “Effect of rice husk ash on lime stabilization,” Journal of the Institution of Engineers, vol. 87, pp. 33–39, 2006. View at Google Scholar · View at Scopus
  9. M. Alhassan, “Permeability of lateritic soil treated with lime and rice husk ash,” AU Journal of Technology, vol. 12, no. 2, pp. 115–120, 2008. View at Google Scholar
  10. B. R. Phani Kumar, S. Sharama, and B. Vara Prasad Rao, “Engineering behavior of a remolded expansive clay blended with Lime, calcium chloride, and rice-husk ash,” Journal of Materials in Civil Engineering, vol. 20, no. 8, pp. 509–515, 2008. View at Google Scholar
  11. T. K. Roy, B. C. Chattopadhyaya, and S. K. Roy, “Effect of lime on the properties of subgrade of roads with addition of rice husk ash,” in Proceedings of the International Grains Conference (IGC '09), pp. 175–179, Guntur, India, 2009.
  12. ASTM C618-03, “Standard specification for coal fly ash and raw or calcined natural pozzolan for use as a mineral admixture in portland cement concrete,” American Society for Testing of Materials, Pennsylvania, Pa, USA, 2003.
  13. A. Sridharan, N. S. Pandian, and P. S. Prasad, “Classification of coal ashes for geotechnical engineering practice,” in Proceedings of the International Conference on Civil Engineering, pp. 738–745, Indian Institute of Science, Bangalore, India, 2001.
  14. N. S. Pandian, “Stabilization of expansive soil with fly ash,” in Proceedings of the National Symposium on Advances in Geotechnical Engineering, pp. 81–89, Karnataka Geotechnical Center of Indian Geotechnical Society, Karnataka, India, 2004.
  15. J. L. Eades and R. E. Grim, “A quick test to determine lime requirement for lime stabilization,” Highway Research Records, vol. 139, pp. 62–72, 1966. View at Google Scholar
  16. ASTM D2487-10, “Standard practice for classification of soils for engineering purposes (unified soil classification system),” American Society for Testing of Materials, Pennsylvania, Pa, USA.
  17. ASTM D4318-10, “Standard test methods for liquid limit, plastic limit, and plasticity index of soils,” American Society for Testing of Materials, Pennsylvania, Pa, USA.
  18. ASTM D698-07e1, “Standard test methods for laboratory compaction characteristics of soil using standard effort,” American Society for Testing of Materials, Pennsylvania, Pa, USA.
  19. ASTM D2166-06, “Standard test method for unconfined compressive strength of cohesive soil,” American Society for Testing of Materials, Pennsylvania, Pa, USA.
  20. ARMY TM 5-822-14 and Air Force AFJMAN 32-1019, “Soil stabilization for pavements,” Department of the Army, the Navy, and the Air force, 1994.