Table of Contents
ISRN Mechanical Engineering
Volume 2011 (2011), Article ID 193124, 6 pages
http://dx.doi.org/10.5402/2011/193124
Research Article

Identifying Enablers of E-Manufacturing

Department of Mechanical Engineering, YMCA University of Science and Technology, Sector-6, Faridabad 121006, Haryana, India

Received 31 January 2011; Accepted 28 March 2011

Academic Editors: K. Ghali and Y. He

Copyright © 2011 Rajeev Saha and Sandeep Grover. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. “An e-manufacturing strategy needs to be developed from the manufacturing strategy,” AMR Research, Inc, August 2000.
  2. M. Koç, J. Ni, and J. Lee, “Introduction of e-manufacturing,” in Proceeding of the International Conference on Frontiers on Design and Manufacturing, pp. 43–47, Dalian, China, July 2002.
  3. K. Cheng and R. J. Bateman, “E-manufacturing: characteristics, applications and potentials,” Progress in Natural Science, vol. 18, pp. 1323–1328, 2008. View at Google Scholar
  4. G. Lin and S. Nagalingam, CIM Justification and Optimisation, Taylor and Francis, London, UK, 1st edition, 2000.
  5. B. Wu, Manufacturing Systems Design and Analysis, Chapman & Hall, London, UK, 2nd edition, 1994.
  6. L. Winner, Autonomous Technology, MIT Press, Cambridge, Mass, USA, 1977.
  7. R. Zammuto and E. O’Connor, “Gaining advanced manufacturing technologies' benefits: the roles of organization design and culture,” Academy of Management Review, vol. 17, pp. 701–728, 1992. View at Google Scholar
  8. N. Beaumont, R. Schroder, and A. Sohal, “Do foreign-owned firms manage advanced manufacturing technology better,” International Journal of Operations & Production Management, vol. 22, no. 7, pp. 759–771, 2002. View at Google Scholar
  9. L. Jin, I. A. Oraifige, P. M. Lister et al., “E-manufacturing in networked virtual environments,” in Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, vol. 3, pp. 1845–1849, October 2001.
  10. J. Lee, A. Ali, and M. Koç, “E-manufacturing-its elements and impact,” in Proceedings of the Annual Institute of Industrial Engineering Conference, vol. 23, Dallas, Tex, USA, May 2001.
  11. J. Lee, “E-manufacturing—fundamental, tools, and transformation,” Robotics and Computer-Integrated Manufacturing, vol. 19, no. 6, pp. 501–507, 2003. View at Google Scholar
  12. “Rockwell Automation E-manufacturing Industry Road Map,,” http://www.rockwellautomation.com/.
  13. H. K. Shivanand, N. V. Nanjundaradhya, and P. Kammar, “E-manufacturing a technology review,” in Proceedings of the World Congress on Engineering, vol. 2, London, UK, July 2008.
  14. M. Koç, J. Ni, J. Lee et al., “Introduction of e-manufacturing,” in Proceedings of the International Conference on Frontiers on Design and Manufacturing, pp. 1–10, July 2005.
  15. G. Morel, P. Valckenaers, J. M. Faure et al., “Manufacturing plant control: challenges and open issues,” in Proceedings of the 16th IFAC Triennial World Congress, 2005.
  16. C. E. Pereira and L. Carro, “Distributed real-time embedded systems: recent advances, future trends and their impact on manufacturing plant control,” Annual Reviews in Control, vol. 31, no. 1, pp. 81–92, 2007. View at Google Scholar
  17. M. Koç and J. Lee, “E-manufacturing-fundamentals, requirements and expected impacts,” International Journal of Advanced Manufacturing Systems, vol. 6, no. 1, pp. 29–46, 2003. View at Google Scholar
  18. G. Greeff, R. Ghoshal, and S. Mackay, Practical E-Manufacturing and Supply Chain Management, chapter 1, Elsevier, 2004.
  19. NACFAM, Exploiting E-Manufacturing: Interoperability of Software Systems Used By U.S. Manufacturers, National Coalition for Advanced Manufacturing, Washington, DC, USA, 2001.