Table of Contents
ISRN Mechanical Engineering
Volume 2011 (2011), Article ID 381615, 9 pages
http://dx.doi.org/10.5402/2011/381615
Research Article

Mechanical Behaviour and Springback Study of an Aluminium Alloy in Warm Forming Conditions

1Laboratoire d'Ingénierie des MATériaux de Bretagne (LIMATB-EG2M), Université de Bretagne-Sud, Université Européenne de Bretagne, BP 92116, 56321 Lorient Cedex, France
2CEMUC, Departamento de Engenharia Mecânica, Universidade de Coimbra, Polo II, 3030-201 Coimbra, Portugal
3Departamento de Engenharia Mecânica, Universidade de Aveiro, Campus Universitrio de Santiago, 3810-193 Aveiro, Portugal

Received 14 January 2011; Accepted 2 March 2011

Academic Editors: T. K. Basak, Y. He, and K. Sasaki

Copyright © 2011 H. Laurent et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Takuda, K. Mori, I. Masuda, Y. Abe, and M. Matsuo, “Finite element simulation of warm deep drawing of aluminium alloy sheet when accounting for heat conduction,” Journal of Materials Processing Technology, vol. 120, no. 1–3, pp. 412–418, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. D. Finch, S. Wilson, and J. Dorn, “Deep-drawing aluminum alloys at elevated temperatures,” ASM Transactions, vol. 36, pp. 254–289, 1946. View at Google Scholar
  3. R. A. Ayres, “Alloying aluminum with magnesium for ductility at warm temperatures (250C),” Metallurgical Transactions A, vol. 10, no. 7, pp. 849–854, 1979. View at Publisher · View at Google Scholar · View at Scopus
  4. F. Shehata, M. J. Painter, and R. Pearce, “Warm forming of aluminium/magnesium alloy sheet,” Journal of Mechanical Working Technology, vol. 2, no. 3, pp. 279–290, 1978. View at Google Scholar · View at Scopus
  5. E. M. Taleff, G. A. Henshall, D. R. Lesuer, and T. G. Nieh, “Warm formability of aluminum-magnesium alloys,” in Proceedings of the 4th international conference of aluminum alloys, Atlanta, Ga, USA, 1994.
  6. T. Naka and F. Yoshida, “Deep drawability of type 5083 aluminium-magnesium alloy sheet under various conditions of temperature and forming speed,” Journal of Materials Processing Technology, vol. 89-90, pp. 19–23, 1999. View at Publisher · View at Google Scholar
  7. P. J. Bolt, N. A. P. M. Lamboo, and P. J. C. M. Rozier, “Feasibility of warm drawing of aluminium products,” Journal of Materials Processing Technology, vol. 115, no. 1, pp. 118–121, 2001. View at Publisher · View at Google Scholar
  8. T. Naka, G. Torikai, R. Hino, and F. Yoshida, “The effects of temperature and forming speed on the forming limit diagram for type 5083 aluminum-magnesium alloy sheet,” Journal of Materials Processing Technology, vol. 113, no. 1–3, pp. 648–653, 2001. View at Publisher · View at Google Scholar · View at Scopus
  9. A. van den Boogaard, Thermally enhanced forming of aluminum sheet—modeling and experiments, Ph.D. thesis, Twente University, Enschede, The Netherlands, 2002.
  10. Y. H. Moon, S. S. Kang, J. R. Cho, and T. G. Kim, “Effect of tool temperature on the reduction of the springback of aluminum sheets,” Journal of Materials Processing Technology, vol. 132, no. 1–3, pp. 365–368, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. A. H. van den Boogaard and J. Huétink, “Simulation of aluminium sheet forming at elevated temperatures,” Computer Methods in Applied Mechanics and Engineering, vol. 195, no. 48-49, pp. 6691–6709, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. N. Abedrabbo, F. Pourboghrat, and J. Carsley, “Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models,” International Journal of Plasticity, vol. 23, no. 5, pp. 841–875, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. P. A. Tebbe and G. T. Kridli, “Warm forming of aluminium alloys: an overview and future directions,” International Journal of Materials and Product Technology, vol. 21, no. 1–3, pp. 24–40, 2004. View at Google Scholar · View at Scopus
  14. S. Toros, F. Ozturk, and I. Kacar, “Review of warm forming of aluminum-magnesium alloys,” Journal of Materials Processing Technology, vol. 207, no. 1–3, pp. 1–12, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. D. Li and A. K. Ghosh, “Biaxial warm forming behavior of aluminum sheet alloys,” Journal of Materials Processing Technology, vol. 145, no. 3, pp. 281–293, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Palumbo and L. Tricarico, “Numerical and experimental investigations on the Warm Deep Drawing process of circular aluminum alloy specimens,” Journal of Materials Processing Technology, vol. 184, no. 1–3, pp. 115–123, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. H. S. Kim, M. Koç, J. Ni, and A. Ghosh, “Finite element modeling and analysis of warm forming of aluminum alloys—validation through comparisons with experiments and determination of a failure criterion,” Journal of Manufacturing Science and Engineering, vol. 128, no. 3, pp. 613–621, 2006. View at Publisher · View at Google Scholar
  18. H. S. Kim and M. Koç, “Numerical investigations on springback characteristics of aluminum sheet metal alloys in warm forming conditions,” Journal of Materials Processing Technology, vol. 204, no. 1–3, pp. 370–383, 2008. View at Publisher · View at Google Scholar
  19. D. Li and A. Ghosh, “Tensile deformation behavior of aluminum alloys at warm forming temperatures,” Materials Science and Engineering A, vol. 352, no. 1-2, pp. 279–286, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Laurent, R. Grèze, P. Y. Manach, and S. Thuillier, “Influence of constitutive model in springback prediction using the split-ring test,” International Journal of Mechanical Sciences, vol. 51, no. 3, pp. 233–245, 2009. View at Publisher · View at Google Scholar
  21. M. C. Oliveira, J. L. Alves, B. M. Chaparro, and L. F. Menezes, “Study on the influence of work-hardening modeling in springback prediction,” International Journal of Plasticity, vol. 23, no. 3, pp. 516–543, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. L. Geng and R. H. Wagoner, “Role of plastic anisotropy and its evolution on springback,” International Journal of Mechanical Sciences, vol. 44, no. 1, pp. 123–148, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. Z. Dongjuan, C. Zhenshan, R. Xueyu, and L. Yuqiang, “Sheet springback prediction based on non-linear combined hardening rule and Barlat89's yielding function,” Computational Materials Science, vol. 38, no. 2, pp. 256–262, 2006. View at Publisher · View at Google Scholar
  24. M. Firat, B. Kaftanoglu, and O. Eser, “Sheet metal forming analyses with an emphasis on the springback deformation,” Journal of Materials Processing Technology, vol. 196, no. 1–3, pp. 135–148, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. B. Haddag, T. Balan, and F. Abed-Meraim, “Investigation of advanced strain-path dependent material models for sheet metal forming simulations,” International Journal of Plasticity, vol. 23, no. 6, pp. 951–979, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. T. B. Stoughton and J. W. Yoon, “Anisotropic hardening and non-associated flow in proportional loading of sheet metals,” International Journal of Plasticity, vol. 25, no. 9, pp. 1777–1817, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. T. Keum and B. Y. Han, “Springback of FCC sheet in warm forming,” Journal of Ceramic Processing Research, vol. 3, no. 3, pp. 159–165, 2002. View at Google Scholar · View at Scopus
  28. H. Laurent, R. Grèze, M. C. Oliveira, L. F. Menezes, P. Y. Manach, and J. L. Alves, “Numerical study of springback using the split-ring test for an AA5754 aluminum alloy,” Finite Elements in Analysis and Design, vol. 46, no. 9, pp. 751–759, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. Z. C. Xia, C. E. Miller, and F. Ren, “Springback behavior of AA6111-T4 with split-ring test,” in Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM '04), J. C. C. S. Ghosh and J. Lee, Eds., vol. 712 of AIP Conference Proceedings, pp. 934–939, June 2004. View at Publisher · View at Google Scholar
  30. R. Echempati and V. M. S. S. Dev, “Spring back studies in aluminium alloys,” in Society of Automotive Engineers, vol. 01-1057, Inc., New York, NY, USA, 2002. View at Google Scholar
  31. C. W. Hsu, A. G. Ulsoy, and M. Y. Demeri, “Development of process control in sheet metal forming,” Journal of Materials Processing Technology, vol. 127, no. 3, pp. 361–368, 2002. View at Publisher · View at Google Scholar · View at Scopus
  32. T. Gnaeupel-Herold, H. J. Prask, R. J. Fields, T. J. Foecke, Z. C. Xia, and U. Lienert, “A synchrotron study of residual stresses in a Al6022 deep drawn cup,” Materials Science and Engineering A, vol. 366, no. 1, pp. 104–113, 2004. View at Publisher · View at Google Scholar · View at Scopus
  33. T. Foecke and T. Gnaeupel-Herold, “Robustness of the sheet metal springback cup test,” Metallurgical and Materials Transactions A, vol. 37, no. 12, pp. 3503–3510, 2006. View at Publisher · View at Google Scholar · View at Scopus
  34. Z. C. Xia, C. E. Miller, and F. Ren, “Experimental and numerical investigations of a split-ring test for springback,” Journal of Manufacturing Science and Engineering, vol. 129, no. 2, pp. 352–359, 2007. View at Publisher · View at Google Scholar
  35. B. M. Chaparro, S. Thuillier, L. F. Menezes, P. Y. Manach, and J. V. Fernandes, “Material parameters identification: gradient-based, genetic and hybrid optimization algorithms,” Computational Materials Science, vol. 44, no. 2, pp. 339–346, 2008. View at Publisher · View at Google Scholar · View at Scopus
  36. R. C. Picu, G. Vincze, F. Ozturk, J. J. Gracio, F. Barlat, and A. M. Maniatty, “Strain rate sensitivity of the commercial aluminum alloy AA5182-O,” Materials Science and Engineering A, vol. 390, no. 1-2, pp. 334–343, 2005. View at Publisher · View at Google Scholar · View at Scopus
  37. H. Halim, D. S. Wilkinson, and M. Niewczas, “The Portevin-Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy,” Acta Materialia, vol. 55, no. 12, pp. 4151–4160, 2007. View at Publisher · View at Google Scholar · View at Scopus
  38. T. Böhlke, G. Bondár, Y. Estrin, and M. A. Lebyodkin, “Geometrically non-linear modeling of the Portevin-Le Chatelier effect,” Computational Materials Science, vol. 44, no. 4, pp. 1076–1088, 2009. View at Publisher · View at Google Scholar · View at Scopus
  39. J. Coër, C. Bernard, H. Laurent, A. Andrade-Campos, and S. Thuillier, “The effect of temperature on anisotropy properties of an aluminium alloy,” Experimental Mechanics, 2010. View at Publisher · View at Google Scholar
  40. J. J. Gracio, F. Barlat, E. F. Rauch, P. T. Jones, V. F. Neto, and A. B. Lopes, “Artificial aging and shear deformation behaviour of 6022 aluminium alloy,” International Journal of Plasticity, vol. 20, no. 3, pp. 427–445, 2004. View at Publisher · View at Google Scholar · View at Scopus
  41. J. W. Yoon, F. Barlat, J. J. Gracio, and E. Rauch, “Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets,” International Journal of Plasticity, vol. 21, no. 12, pp. 2426–2447, 2005. View at Publisher · View at Google Scholar · View at Scopus
  42. A. Benallal, T. Berstad, T. Børvik, O. S. Hopperstad, I. Koutiri, and R. N. de Codes, “An experimental and numerical investigation of the behaviour of AA5083 aluminium alloy in presence of the Portevin-Le Chatelier effect,” International Journal of Plasticity, vol. 24, no. 10, pp. 1916–1945, 2008. View at Publisher · View at Google Scholar
  43. H. Jiang, Q. Zhang, X. Chen et al., “Three types of Portevin-Le Chatelier effects: experiment and modelling,” Acta Materialia, vol. 55, no. 7, pp. 2219–2228, 2007. View at Publisher · View at Google Scholar · View at Scopus
  44. S. Thuillier, P. Y. Manach, L. F. Menezes, and M. C. Oliveira, “Experimental and numerical study of reverse re-drawing of anisotropic sheet metals,” Journal of Materials Processing Technology, vol. 125-126, pp. 764–771, 2002. View at Publisher · View at Google Scholar · View at Scopus
  45. A. J. Baptista, J. L. Alves, D. M. Rodrigues, and L. F. Menezes, “Trimming of 3D solid finite element meshes using parametric surfaces: application to sheet metal forming,” Finite Elements in Analysis and Design, vol. 42, no. 12, pp. 1053–1060, 2006. View at Publisher · View at Google Scholar · View at Scopus
  46. R. Padmanabhan, M. C. Oliveira, A. J. Baptista, J. L. Alves, and L. F. Menezes, “Numerical study on the influence of initial anisotropy on optimal blank shape,” Finite Elements in Analysis and Design, vol. 45, no. 2, pp. 71–80, 2009. View at Publisher · View at Google Scholar
  47. T. Gnaeupel-Herold, T. Foecke, H. J. Prask, and R. J. Fields, “An investigation of springback stresses in AISI-1010 deep drawn cups,” Materials Science and Engineering A, vol. 399, no. 1-2, pp. 26–32, 2005. View at Publisher · View at Google Scholar · View at Scopus