Table of Contents
ISRN Ceramics
Volume 2011, Article ID 542104, 6 pages
http://dx.doi.org/10.5402/2011/542104
Research Article

Yttrium Oxide Nanoparticles Prepared by Heat Treatment of Cathodically Grown Yttrium Hydroxide

1Material Research School, NSTRI, P.O. Box 14395-836, Tehran, Iran
2Department of Chemistry, Science Faculty, Golestan University, P.O. Box 49138-15739, Gorgan, Iran

Received 11 August 2011; Accepted 7 September 2011

Academic Editors: V. Fruth, Y.-C. Liou, and Y. Waku

Copyright © 2011 Mustafa Aghazadeh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Ukai and M. Fujiwara, “Perspective of ODS alloys application in nuclear environments,” Journal of Nuclear Materials, vol. 307–311, no. 1, pp. 749–757, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. K. Verhiest, A. Almazouzi, N. D. Wispelaere, R. Petrov, and S. Claessens, “Development of oxides dispersion strengthened steels for high temperature nuclear reactor applications,” Journal of Nuclear Materials, vol. 385, no. 2, pp. 308–311, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. Z. C. Wang and K. B. Kim, “Fabrication of YSZ thin films from suspension by electrostatic spray deposition,” Materials Letters, vol. 62, no. 3, pp. 425–428, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. J. D. Lin, J. G. Duh, and C. L. Lo, “Mechanical properties and resistance to hydrothermal aging of ceria- and yttria-doped tetragonal zirconia ceramics,” Materials Chemistry and Physics, vol. 77, no. 3, pp. 808–818, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. J. Lee and Y. Tak, “The preparation of yttrium oxide film deposited by electrochemical method,” Journal of Industrial and Engineering Chemistry, vol. 5, no. 2, pp. 139–142, 1999. View at Google Scholar · View at Scopus
  6. I. Zhitomirsky and A. Petric, “Electrochemical deposition of yttrium oxide,” Journal of Materials Chemistry, vol. 10, no. 5, pp. 1215–1218, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. I. Zhitomirsky and A. Petric, “Electrolytic deposition of ZrO2-Y2O3 films,” Materials Letters, vol. 50, no. 4, pp. 189–193, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Siab, G. Bonnet, J. M. Brossard, and J. F. Dinhut, “Deposition of yttrium-based thin films on TA6V alloy substrates,” Applied Surface Science, vol. 236, no. 1, pp. 50–56, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Aghazadeh, A. Nozad, H. Adelkhani, and M. Ghaemi, “Synthesis of Y2O3 nanospheres via heat-treatment of cathodically grown Y(OH)3 in chloride medium,” Journal of the Electrochemical Society, vol. 157, no. 10, pp. D519–D522, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. Q. Tang, Z. Liu, S. Li, S. Zhang, X. Liu, and Y. Qian, “Synthesis of yttrium hydroxide and oxide nanotubes,” Journal of Crystal Growth, vol. 259, no. 1-2, pp. 208–214, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. D. K. Williams, H. Yuan, and B. M. Tissue, “Size dependence of the luminescence spectra and dynamics of Eu3+ : Y2O3 nanocrystals,” Journal of Luminescence, vol. 83-84, pp. 297–300, 1999. View at Google Scholar · View at Scopus
  12. R. Subramanian, P. Shankar, S. Kavithaa, S. S. Ramakrishnan, P. C. Angelo, and H. Venkataraman, “Synthesis of nanocrystalline yttria by sol-gel method,” Materials Letters, vol. 48, no. 6, pp. 342–346, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Y. Wang and Z. H. Lu, “Preparation of Y2O3 thin films deposited by pulse ultrasonic spray pyrolysis,” Materials Chemistry and Physics, vol. 78, no. 2, pp. 542–545, 2003. View at Publisher · View at Google Scholar · View at Scopus
  14. J. A. Nelson and M. J. Wagner, “Yttrium oxide nanoparticles prepared by alkalide reduction,” Chemistry of Materials, vol. 14, no. 2, pp. 915–917, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Song, B. Chen, H. Peng, and J. Zhang, “Light-induced change of charge transfer band in nanocrystalline Y2O3:Eu3+,” Applied Physics Letters, vol. 81, pp. 1776–1778, 2002. View at Google Scholar
  16. A. J. Rulison and R. C. Flagan, “Synthesis of yttria powders by electrospray pyrolysis,” Journal of the American Ceramic Society, vol. 77, no. 12, pp. 3244–3250, 1994. View at Google Scholar · View at Scopus
  17. R. M. Feng, X. J. Yang, W. J. Ji, and C. T. Au, “Hydrothermal synthesis of stable mesoporous ZrO2-Y2O3 and CeO2-ZrO2-Y2O3 from simple inorganic salts and CTAB template in aqueous medium,” Materials Chemistry and Physics, vol. 107, no. 1, pp. 132–136, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Karuppuchamy and J. M. Jeong, “Super-hydrophilic amorphous titanium dioxide thin film deposited by cathodic electrodeposition,” Materials Chemistry and Physics, vol. 93, no. 2-3, pp. 251–254, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. E. A. McNally, I. Zhitomirsky, and D. S. Wilkinson, “Cathodic electrodeposition of cobalt oxide films using polyelectrolytes,” Materials Chemistry and Physics, vol. 91, no. 2-3, pp. 391–398, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Cao, I. Zhitomirsky, and M. Niewczas, “Electrodeposition of composite iron oxide-poly(allylamine hydrochloride) films,” Materials Chemistry and Physics, vol. 96, no. 2-3, pp. 289–295, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. B.-O. Park, C. D. Lokhande, H.-S. Park, K.-D. Jung, and O.-S. Joo, “Cathodic electrodeposition of RuOM2 thin films from Ru(III)Cl3 solution,” Materials Chemistry and Physics, vol. 87, no. 1, pp. 59–66, 2004. View at Publisher · View at Google Scholar
  22. Y. Hamlaoui, L. Tifouti, C. Remazeilles, and F. Pedraza, “Cathodic electrodeposition of cerium based oxides on carbon steel from concentrated cerium nitrate—part II: influence of electrodeposition parameters and of the addition of PEG,” Materials Chemistry and Physics, vol. 120, no. 1, pp. 172–180, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. Y. Hamlaoui, F. Pedraza, C. Remazeilles et al., “Cathodic electrodeposition of cerium-based oxides on carbon steel from concentrated cerium nitrate solutions—part I. Electrochemical and analytical characterisation,” Materials Chemistry and Physics, vol. 113, no. 2-3, pp. 650–657, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. L. Nan and Y. Kazumichi, “Controlling the morphology of yttrium oxide through different precursors synthesized by hydrothermal method,” Journal of Solid State Chemistry, vol. 181, no. 8, pp. 1738–1743, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. F.-K. Liu, Y.-C. Chang, F.-H. Ko, and T.-C. Chu, “Microwave rapid heating for the synthesis of gold nanorods,” Materials Letters, vol. 58, no. 3-4, pp. 373–377, 2004. View at Publisher · View at Google Scholar
  26. L. Hui-Hong, L. Ying, and L. Hua-Jun, “Regular microarray of Au flower-like structure formed by template-assisted electrodeposition: influence factors and their electrochemical behavior,” Electrochimica Acta, vol. 54, no. 28, pp. 7514–7518, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. L. Yundong, J. Hui, H. Weihua, and T. Hui, “Effects of peak current density on the mechanical properties of nanocrystalline Ni-Co alloys produced by pulse electrodeposition,” Applied Surface Science, vol. 254, no. 21, pp. 6865–6869, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. R. Srinivasan, R. Yogamalar, and A. B. Chandra, “Synthesis and structural studies on nanocrystalline yttrium oxide,” Advanced Science Letters, vol. 2, pp. 65–69, 2009. View at Google Scholar
  29. X. Feng, L. Yinong, X. Lili, X. Yan, D. Min, and L. Yunfei, “Seed layer-free electrodeposition of well-aligned ZnO submicron rod arrays via a simple aqueous electrolyte,” Materials Research Bulletin, vol. 44, no. 8, pp. 1700–1708, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. T. Pauporté and D. Lincot, “Hydrogen peroxide oxygen precursor for zinc oxide electrodeposition II—mechanistic aspects,” Journal of Electroanalytical Chemistry, vol. 517, no. 1-2, pp. 54–62, 2001. View at Publisher · View at Google Scholar · View at Scopus
  31. I. Zhitomirsky, “Cathodic electrodeposition of ceramic and organoceramic materials. Fundamental aspects,” Advances in Colloid and Interface Science, vol. 97, no. 1–3, pp. 279–317, 2002. View at Google Scholar · View at Scopus
  32. B. J. Michel, B. Josseline, C. Juan, and B. Gilles, “Characterization of thin solid films containing yttrium formed by electrogeneration of base for high temperature corrosion applications,” Surface and Coatings Technology, vol. 185, no. 2-3, pp. 275–282, 2004. View at Publisher · View at Google Scholar · View at Scopus
  33. L. Muresan, E. J. Popovici, R. Grecu, and L. B. Tudoran, “Studies on the synthesis of europium activated yttrium oxide by wet-chemical method. 1. Influence of precursor quality on phosphor photoluminescence properties,” Journal of Alloys and Compounds, vol. 471, no. 1-2, pp. 421–427, 2009. View at Publisher · View at Google Scholar · View at Scopus
  34. G. Triantafyllou, G. N. Angelopoulos, and P. Nikolopoulos, “Surface and grain-boundary energies as well as surface mass transport in polycrystalline yttrium oxide,” Journal of Materials Science, vol. 45, no. 8, pp. 2015–2022, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. S. Wang, S. Zhong, Z. Wen et al., “Fabrication, annealing, and electrocatalytic properties of platinum nanoparticles supported on self-organized TiO2 nanotubes,” Rare Metals, vol. 28, pp. 445–449, 2009. View at Google Scholar
  36. R. Srinivasan, N. R. Yogamalar, J. Elanchezhiyan, R. J. Joseyphus, and A. C. Bose, “Structural and optical properties of europium doped yttrium oxide nanoparticles for phosphor applications,” Journal of Alloys and Compounds, vol. 496, no. 1-2, pp. 472–477, 2010. View at Publisher · View at Google Scholar · View at Scopus
  37. F. Vetrone, J. C. Boyer, and J. A. Capobianco, “Yttrium oxide nanocrystals: luminescent properties and applications,” in Encyclopedia of Nanoscience and Nanotechnology, H. S. Nalwa, Ed., vol. 10, pp. 725–765, 2004. View at Google Scholar
  38. B. E. Prasad, P. V. Kamath, and S. Upadhya, “Electrochemical synthesis of macroporous oxide coatings on stainless-steel substrates,” Journal of the American Ceramic Society, vol. 91, no. 12, pp. 3870–3874, 2008. View at Publisher · View at Google Scholar · View at Scopus
  39. X. Qin, G. Zhou, H. Yang, Y. Yang, J. Zhang, and S. Wang, “Synthesis and upconversion luminescence of monodispersed, submicron-sized Er3+:Y2O3 spherical phosphors,” Journal of Alloys and Compounds, vol. 493, no. 1-2, pp. 672–677, 2010. View at Publisher · View at Google Scholar · View at Scopus
  40. R. A. Nyquist and R. O. Kagel, Handbook of Infrared and Raman Spectra of Inorganic Compound and Organic Salts, vol. 4, Academic press, Tokyo, Japan, 1997.
  41. A. Ubaldini and M. M. Carnasciali, “Raman characterisation of powder of cubic RE2O3 (RE = Nd, Gd, Dy, Tm, and Lu), Sc2O3 and Y2O3,” Journal of Alloys and Compounds, vol. 454, no. 1-2, pp. 374–378, 2008. View at Publisher · View at Google Scholar · View at Scopus
  42. H. Guo and Y. M. Qiao, “Preparation, characterization, and strong upconversion of monodisperse Y2O3:Er3+,Yb3+ microspheres,” Optical Materials, vol. 31, no. 4, pp. 583–589, 2009. View at Publisher · View at Google Scholar · View at Scopus