Table of Contents
ISRN Mechanical Engineering
Volume 2011 (2011), Article ID 650562, 5 pages
Research Article

Tribological Behavior of Hastelloy C and Refractalloy 26

Department of Industrial Engineering II, University of A Coruña, C/Mendizábal s/n, 15403 Ferrol, Spain

Received 21 July 2011; Accepted 12 September 2011

Academic Editors: R. Brighenti and X. Yang

Copyright © 2011 A. Varela et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


This paper compares the abrasive wear behaviour of two nickel alloys (Hastelloy and Refractalloy). Wear was calculated by weight loss using pin-on-disk tests that were carried out at certain values of load, speed, and temperature range. The study is completed with metallographic observations at different temperatures of the wear tracks before and after the tests. Also, the variation of the coefficient of friction with temperature is calculated in the two alloys studied.