Table of Contents
ISRN Civil Engineering
Volume 2012 (2012), Article ID 271414, 12 pages
http://dx.doi.org/10.5402/2012/271414
Research Article

Some Remarks on the Seismic Demand Estimation in the Context of Vulnerability Assessment of Large Steel Storage Tank Facilities

Department of Biosciences and Territory—Structural and Geotechnical Dynamics Laboratory, University of Molise, Via Duca degli Abruzzi, 86039 Termoli, Italy

Received 29 August 2012; Accepted 18 October 2012

Academic Editors: N. D. Lagaros and I. Smith

Copyright © 2012 Antonio Di Carluccio and Giovanni Fabbrocino. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Di Carluccio, I. Iervolino, G. Manfredi, G. Fabbrocino, and E. Salzano, “Quantitative probabilistic seismic risk analysis of storage facilities,” in Proceedings of 2nd International Conference on Safety & Environment in Process Industry CISAP-2, Naples, Fla, USA, May 2006.
  2. E. Salzano, A. D. Carluccio, A. G. Agreda, G. Fabbrocino, and G. Manfredi, “The interaction of earthquakes with process equipment in the framework of risk assessment,” in Proceedings of 41st Annual Loss Prevention Symposium, Houston, Tex, USA, April 2007. View at Scopus
  3. E. Salzano, A. Garcia Agreda, A. Di Carluccio, and G. Fabbrocino, “Risk assessment and early warning systems for industrial facilities in seismic zones,” Reliability Engineering and System Safety, vol. 94, no. 10, pp. 1577–1584, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. AWWA D100-96, Welded Steel Tanks for Water Storage, American Water Works Association, Denver, Colo, USA, 1996.
  5. API 620, Welded Steel Tanks for Oil Storage, American Petroleum Institute, Washington, DC, USA, 1998.
  6. API 650, Design and Construction of Large, Welded, Low-Pressure Storage Tanks, American Petroleum Institute, Washington, DC, USA, 1998.
  7. NIST GCR 97-720, Reliability and Restoration of Water Supply Systems for Fire Suppression and Drinking Following Earthquakes, National Institute of Standards and Technology, Gaithersburg, Md, USA, 1997.
  8. E. Salzano, I. Iervolino, and G. Fabbrocino, “Seismic risk of atmospheric storage tanks in the framework of quantitative risk analysis,” Journal of Loss Prevention in the Process Industries, vol. 16, no. 5, pp. 403–409, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. C. A. Cornell, “Engineering seismic risk analysis,” Bulletin of the Seismological Society of America, vol. 58, pp. 1583–1606, 1968. View at Google Scholar
  10. P. E. Pinto, R. Giannini, and P. Franchin, Seismic Reliability Analysis of Structures, IUSS Press, Pavia, Italy, 2004.
  11. P. K. Malhotra, “Seismic response of soil-supported unanchored liquid-storage tanks,” Journal of Structural Engineering, vol. 123, no. 4, pp. 440–450, 1997. View at Google Scholar · View at Scopus
  12. Eurocode 8, Design Provisions of Earthquake Resistance of Structures, Part 4: Silos, Tanks and Pipelines, European Committee for Standardization, Brussels, Belgium, 1998.
  13. D. Vamvatsikos and C. Allin Cornell, “Incremental dynamic analysis,” Earthquake Engineering and Structural Dynamics, vol. 31, no. 3, pp. 491–514, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. “Disastrous blow to Sichuan Hongda, Jinhe phosphate mine and Qingping phosphate mine,” China Chemical Reporter, vol. 19, no. 17, p. 15, 2008.
  15. Ministry of Environmental Protection, “Ministry of Environmental Protection releases environmental monitoring information on disaster area no evident change found in water quality,” 2008, http://english.mep.gov.cn/News_service/news_release/200805/t20080520_122693.htm.
  16. ASCE-TCLEE, 2010. The Mw 8.8 Chile Earthquake of February 27, 2010, http://www.eqclearinghouse.org/20100227-chile/wp-content/uploads/2010/04/TCLEE-Web-Report-EERI-v1.pdf.
  17. H. Nishi, “Damage on hazardous materials facilities,” in Proceedings of the International Symposium on Engineering Lessons Learned from the 2011 Great East Japan Earthquake, Tokyo, Japan, March 2012.
  18. S. Silvestri, G. Gasparini, T. Trombetti, and D. Foti, “On the evaluation of the horizontal forces produced by grain-like inside silos during earthquakes,” Bulletin of Earthquake Engineering, vol. 10, pp. 1535–1560, 2012. View at Google Scholar
  19. A. Di Carluccio, Structural characterization and seismic evaluation of steel equipment in industrial plants [Ph.D. thesis], Seismic Risk, University of Naples, 2007.
  20. A. Di Carluccio, G. Fabbrocino, and G. Manfredi, “FEM seismic analysis of steel tanks for oil storage in industrial facilities,” in Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, September 2008.
  21. P. K. Malhotra, T. Wenk, and M. Wieland, “Simple procedure for seismic analysis of liquid-storage tanks,” Structural Engineering International, vol. 10, no. 3, pp. 197–201, 2000. View at Google Scholar · View at Scopus
  22. G. W. Housner, “Dynamic behaviour of water tanks,” Bulletin of the Seismological Society of America, vol. 53, pp. 381–387, 1963. View at Google Scholar
  23. L. S. Jacobsen, “Impulsive hydrodynamics of fluid inside a cylindrical tank,” Bulletin of the Seismological Society of America, vol. 39, pp. 189–204, 1949. View at Google Scholar
  24. G. W. Housner, “Dynamic pressures on accelerated fluid containers,” Bulletin of the Seismological Society of America, vol. 1, pp. 15–37, 1957. View at Google Scholar
  25. E. Rosenblueth and N.M. Newmark, Fundamentals of Earthquake Engineering, Prentice Hall, Upper Saddle River, NJ, USA, 1971.
  26. M. A. Haroun, “Vibration studies and test of liquid storage tanks,” Earthquake Engineering & Structural Dynamics, vol. 11, no. 2, pp. 179–206, 1983. View at Google Scholar · View at Scopus
  27. M. K. Shrimali and R. S. Jangid, “Seismic response of liquid storage tanks isolated by sliding bearings,” Engineering Structures, vol. 24, no. 7, pp. 909–921, 2002. View at Publisher · View at Google Scholar · View at Scopus
  28. M. K. Shrimali and R. S. Jangid, “Seismic analysis of base-isolated liquid storage tanks,” Journal of Sound and Vibration, vol. 275, no. 1-2, pp. 59–75, 2004. View at Publisher · View at Google Scholar · View at Scopus
  29. M. B. Jadhav and R. S. Jangid, “Response of base-isolated liquid storage tanks to near-fault motions,” Structural Engineering and Mechanics, vol. 23, no. 6, pp. 615–634, 2006. View at Google Scholar · View at Scopus
  30. M. C. Constantinou, A. S. Mokha, and A. M. Reinhorn, “Teflon bearings in base isolation II. Modeling,” Journal of Structural Engineering, vol. 116, no. 2, pp. 455–474, 1990. View at Google Scholar · View at Scopus
  31. P. K. Malhotra, Seismic response of uplifting liquid storage tanks [Ph.D. thesis], Rice University, Houston, Tex, USA, 1991.
  32. P. K. Malhotra, “Base uplifting analysis of flexibily supported liquid-storage tanks,” Earthquake Engineering & Structural Dynamics, vol. 24, no. 12, pp. 1591–1607, 1995. View at Google Scholar · View at Scopus
  33. M. N. Ahari, S. Eshghi, and M. G. Ashtiany, “The tapered beam model for bottom plate uplift analysis of unanchored cylindrical steel storage tanks,” Engineering Structures, vol. 31, no. 3, pp. 623–632, 2009. View at Publisher · View at Google Scholar · View at Scopus
  34. G. Fabbrocino, A. Di Carluccio, G. Manfredi, and E. Salzano, “Seismic behaviour of Industrial Steel Components in Industrial Plants,” in Proceedings of 21th CTA Congress, Catania, Italy, October 2007.
  35. A. Di Carluccio, G. Fabbrocino, and G. Manfredi, “Fem Analysis of atmospheric tanks under seismic excitation,” in Proceedings of Conference Behaviour of Steel Structures in Seismic area, Philadelphia, Pa, USA, August 2009.
  36. A. K. Chopra, Dynamics of Structures, Theory and Applications to Earthquake Engineering, Prentice Hall, 1995.