Table of Contents
ISRN Metallurgy
Volume 2012 (2012), Article ID 487351, 6 pages
http://dx.doi.org/10.5402/2012/487351
Research Article

Modeling to Study the Effect of Environmental Parameters on Corrosion of Mild Steel in Seawater Using Neural Network

Department of Metallurgical and Material Engineering, Jadavpur University, Kolkata 700032, India

Received 15 December 2011; Accepted 4 January 2012

Academic Editors: J. Eckert and J. M. Rodriguez-Ibabe

Copyright © 2012 Subir Paul. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Dechema Handbook of Corrosion, vol. 11, VCH Publishers, Weinheim, NY, USA, 1992.
  2. M. A. Yescas, H. K. D. H. Bhadeshia, and D. J. MacKay, “Estimation of the amount of retained austenite in austempered ductile irons using neural networks,” Materials Science and Engineering A, vol. 311, no. 1-2, pp. 162–173, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. E. A. Metzbower, J. J. DeLoach, S. H. Lalam, and H. K. D. H. Bhadeshia, “Neural network analysis of strength and ductility of welding alloys for high strength low alloy shipbuilding steels,” Science and Technology of Welding and Joining, vol. 6, no. 2, pp. 116–124, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Malinov, W. Sha, and Z. Guo, “Artificial neural network modelling of crystallization temperatures of the Ni–P based amorphous alloys Material,” Materials Science and Engineering A, vol. 283, pp. 1–218, 2000. View at Google Scholar
  5. S. Malinov, W. Sha, and J. J. McKeown, “Modelling the correlation between processing parameters and properties in titanium alloys using artificial neural network,” Computational Materials Science, vol. 21, no. 3, pp. 375–394, 2001. View at Publisher · View at Google Scholar · View at Scopus
  6. O. Gundersen, A. O. Kluken, O. R. Myhr et al., Mathematical Modeling of Weld Phenomena 5, Edited by H. Cerjak, Institute of Materials, London, UK, 2001.
  7. S. McShane, S. Malinov, J. J. McKeown, and W. Sha, Computational Modeling of Materials, Minerals, and Metals Processing, Edited by M. Cross, J.W. Evans, C. Bailey, TMS, Easton, Pa, USA, 2001.
  8. S. Malinov and W. Sha, “Application of artificial neural networks for modelling correlations in titanium alloys,” Materials Science and Engineering A, vol. 365, no. 1-2, pp. 202–211, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. V. D. Kiselev, S. M. Ukhlovtsev, A. N. Podobaev, and I. I. Reformatskaya, “Analysis of corrosion behavior of steel 3 in chloride solutions by using neural networks,” Protection of Metals, vol. 42, no. 5, pp. 452–458, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. K. V. S. Ramana, T. Anita, S. Mandal et al., “Effect of different environmental parameters on pitting behavior of AISI type 316L stainless steel: experimental studies and neural network modeling,” Materials and Design, vol. 30, no. 9, pp. 3770–3775, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. F. Yosserman, Neirokomp’yuternaya tekhnika: Teoriya I Praktika (Neural-Computer Technique: Theory and Practice), Mir, Moscow, Russia, 1992.
  12. A. N. Gorban, Obuchenie neironnykh setei (Learning of Neural Networks), SP ParaGraf, Moscow, Russia, 1991.
  13. K. Gurney, An Introduction to Neural Network, UCL Press Limited, 1997.
  14. L. Ileană, C. Rotar, and A. Incze, “The optimization of feed forward neural network structures using genetic algorithm,” in Proceedings of the International Conference on Theory and Applications of Mathematics and Informatics (ICTAMI '04), Thessaloniki, Greece, 2004.
  15. J. R. Scully, “Polarization resistance method for determination of instantaneous corrosion rates,” Corrosion, vol. 56, no. 2, pp. 199–217, 2000. View at Google Scholar · View at Scopus
  16. ASTM G 5, Potentiostatic and Potentiodynamic Anodic Polarization Measurements.
  17. ASTM G 59, Polarization Resistance Measurements.
  18. ASTMG 61, Cyclic Polarization Measurements for Localized Corrosion.
  19. N. G. Thompson and J. H. Payer, DC Electrochemical Test Methods, National Association of Corrosion Engineers, Houston, Tex, USA.
  20. C. Barchiche, C. Deslouis, O. Gil, S. Joiret, P. Refait, and B. Tribollet, “Role of sulphate ions on the formation of calcareous deposits on steel in artificial seawater; the formation of Green Rust compounds during cathodic protection,” Electrochimica Acta, vol. 54, no. 13, pp. 3580–3588, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. Ph. Refait, J. B. Memet, C. Bon, R. Sabot, and J. M. R. Génin, “Formation of the Fe(II)–Fe(III) hydroxysulphate green rust during marine corrosion of steel,” Corrosion Science, vol. 45, no. 4, pp. 833–845, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Pineau, R. Sabot, L. Quillet et al., “Formation of the Fe(II–III) hydroxysulphate green rust during marine corrosion of steel associated to molecular detection of dissimilatory sulphite-reductase,” Corrosion Science, vol. 50, no. 4, pp. 1099–1111, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. D. A. Jones, Principles and Prevention of Corrosion, Prentice Hall, 2nd edition, 1996.