Table of Contents
ISRN Materials Science
Volume 2012 (2012), Article ID 572703, 7 pages
http://dx.doi.org/10.5402/2012/572703
Research Article

Improvement in Mechanical Properties of Standard 15CDV6 Steel by Increasing Carbon and Chromium Content and Inoculation with Titanium during ESR

1Department of Metallurgical Engineering, National Institute of Technology, Durgapur 713209, India
2Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Powai, Mumbai 400076, India

Received 13 October 2011; Accepted 31 October 2011

Academic Editors: J. Foct and T. Ohtani

Copyright © 2012 T. R. Bandyopadhyay et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Sreekumar, M. S. P. Murthy, A. Natarajan, P. P. Sinha, and K. V. Nagarajan, “Identification and morphology of structures in 15CDV6 steel,” Transactions of the Indian Institute of Metals, vol. 35, no. 4, pp. 349–355, 1982. View at Google Scholar · View at Scopus
  2. G. M. Padki, M. S. N. Balasubramanian, K. M. Gupt, and P. Krishna Rao, “Effect of ESR and carbon content on mechanical properties of a high strength (15CDV6) for aerospace applications,” Ironmaking and Steelmaking, vol. 10, no. 4, pp. 180–184, 1983. View at Google Scholar · View at Scopus
  3. M. Chatterjee, M. S. N. Balasubramanian, K. M. Gupt, and P. K. Rao, “Inoculation during electroslag remelting of 15CDV6 steel,” Ironmaking and Steelmaking, vol. 17, no. 1, pp. 38–42, 1990. View at Google Scholar · View at Scopus
  4. C. H. Young and H. K. D. H. Bhadeshia, “Strength of mixtures of bainite and martensite,” Materials Science and Technology, vol. 10, p. 209, 1994. View at Google Scholar
  5. J. Campbell and J. W. Bannister, “Grain refinement of electroslag remelted iron alloys,” Met Technol, vol. 2, no. 9, pp. 409–415, 1975. View at Google Scholar · View at Scopus
  6. F. Erdmann-Jesnitzer and V. Prozens, “Studies on the influence of nucleation on structure and segregation of ESR steels,” Arch. Eisenhuttenwes, vol. 47, p. 367, 1976. View at Google Scholar
  7. F. Erdmann-Jesnitzer and V. Prozens, “Influence of nuclei forming agent upon formation of crystalline structure and segregation in electroslag remelting of steel,” in Proceedings of the 5th International Conference on Vac. Met. and ESR, p. 123, Munich, Germany, 1976.
  8. T. R. Bandyopadhyay, P. Krishna Rao, and N. Prabhu, “Effect of inoculation during electroslag refining on grain size of 15CDV6 and modified 15CDV6 steels,” Ironmaking and Steelmaking, vol. 33, no. 4, pp. 331–336, 2006. View at Publisher · View at Google Scholar · View at Scopus