Alternate-Fueled Combustor-Sector Performance—Part A: Combustor Performance and Part B: Combustor Emissions

Table 4

Combustor outer and inner liner temperature, thermal difference data, and number and name of thermocouples (TCs) used to plot thermal profiles.^a,b,c

				𝐹/𝐴=0.010			𝐹/𝐴=0.015			𝐹/𝐴=0.020
TC	Unwrapped^d			JP-8	FT	50 : 50	JP-8	FT	50 : 50	JP-8	FT	50 : 50
	TC no.	𝑋	Θ	Col C	Col G	Col F	Col O	Col K	Col M	Col Q	Col V	Col T
Outer liner
			0.00
TOLAL	22	0.94	0.20	817	825	825	852	850	846	882	873	881
TOLFL	20	0.00	0.22	900	904	907	968	935	946	1030	971	1002
TOLML	21	0.67	0.26	861	870	869	927	924	925	987	957	985
TOLMWA	24	0.19	0.32	870	875	878	962	917	944	1027	960	1002
TOLFM	27	0.00	0.34	899	902	908	983	944	956	1060	985	1024
TOLCA	25	1.00	0.52	862	872	872	920	910	912	986	952	974
TOLAM	28	0.94	0.58	814	825	825	852	851	850	888	874	886
TOLMR	36	0.67	0.62	873	887	884	953	918	941	1013	955	996
TOLFR	34	0.00	0.74	887	888	891	965	924	944	1016	956	1001
TOLMWI	23	0.33	0.79	879	879	884	933	905	914	992	937	969
TOLAR	37	0.84	0.86	831	843	843	877	872	874	917	906	922
TSWFD	41	0.22	0.97	1218	1288	1280	1438	1469	1444	1544	1565	1581
TSWFT	30	0.78	1.00	814	820	820	847	836	841	854	842	850
Inner liner
TILMWI	38	0.50	1.20	897	908	906	994	969	976	1091	1023	1066
TILFR	35	0.00	1.23	890	917	919	995	959	967	1075	1006	1050
TILMWO	26	0.50	1.33	902	908	909	988	962	968	1096	1025	1071
TILCA	29	1.00	1.50	1056	1065	1058	1229	1217	1219	1411	1326	1348
TILFL	39	0.00	1.54	913	917	916	1002	970	981	1098	1030	1069
			2.00

^aGeometric position accuracy of thermocouple position coordinates is estimated at ±1.5%.
^bFor nominal inlet pressure 225 psia (1.55 MPa), 800°F (700 K), and 3% combustor pressure drop.
^cNote: Col C, G, F, K, M, Q, V, and T are data set tracking identifiers.
^d𝑋=𝑥/𝐿 (which varies from 0 to 1), where 𝑥 is the TC position measured from the liner inlet, and 𝐿 is the overall liner length.
Θ: circumferential TC position measured over the liner outside 𝑦/𝐿_𝜃 (0 to 1) and continuing back along the inside liner (1 to 2), where 𝐿_𝜃 is half the unwrapped liner “width.” The normalized unwrapped coordinate (𝑋,Θ) is the TC location (𝑥,𝑦).