Table of Contents
ISRN Ceramics
Volume 2012, Article ID 719636, 6 pages
http://dx.doi.org/10.5402/2012/719636
Research Article

Study on Strength and Microstructure of Cement Pastes Containing Limestone Powder under Flowing Acid Solution Condition

1State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan 430072, China
2School of Civil Engineering and Architecture, Hubei University of Technology, Wuhan 430068, China
3Department of Civil and Earth Resources Engineering, Kyoto University, Kyoto 615-8540, Japan

Received 15 August 2012; Accepted 7 September 2012

Academic Editors: K. L. Bing and H. I. Hsiang

Copyright © 2012 Shuhua Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Liu and P. Yan, “Experimental study on sodium sulfate attack on mortar containing limestone powder and fly ash [C],” in Proceedings of the International Conference on Durability of Concrete Structures, pp. 542–548, Hangzhou, China, November 2008.
  2. S. Liu and P. Yan, “Effect of limestone powder on microstructure of concrete,” Journal of Wuhan University of Technology, vol. 25, no. 2, pp. 328–331, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. European Committee for Standardization, “Cement: composition, specifications and conformity criteria, Part 1: Common cements [S],” EN 197-1, EN/TC51/WG 6 rev., 2000.
  4. M. Schmidt, “Cement with interground materials—capabilities and environmental relief, part 1,” Zement-Kalk-Gips, vol. 45, no. 4, pp. 87–92, 1992. View at Google Scholar
  5. B. Schiller and H. G. Ellerbrock, “The grinding and properties of cements with several main constituents,” Zement-Kalk-Gips, vol. 45, no. 9, pp. 223–231, 1992. View at Google Scholar
  6. J. Baron and C. Douvre, “Technical and economical aspects of the use of limestone filler additions in cement,” World Cement, vol. 18, no. 3, pp. 100–104, 1987. View at Google Scholar · View at Scopus
  7. S. Sprung and E. Siebel, “Assessment of the suitability of limestone for producing Portland limestone cement (PKZ),” Zement-Kalk-Gips, vol. 44, no. 1, pp. 1–11, 1991. View at Google Scholar
  8. V. Bonavetti, H. Donza, G. Menéndez, O. Cabrera, and E. F. Irassar, “Limestone filler cement in low w/c concrete: a rational use of energy,” Cement and Concrete Research, vol. 33, no. 6, pp. 865–871, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Bertron, J. Duchesne, and G. Escadeillas, “Attack of cement pastes exposed to organic acids in manure,” Cement and Concrete Composites, vol. 27, no. 9-10, pp. 898–909, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. B. Lothenbach, G. Le Saout, E. Gallucci, and K. Scrivener, “Influence of limestone on the hydration of Portland cements,” Cement and Concrete Research, vol. 38, no. 6, pp. 848–860, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Dweck, P. M. Buchler, A. C. V. Coelho, and F. K. Cartledge, “Hydration of a Portland cement blended with calcium carbonate,” Thermochimica Acta, vol. 346, no. 1-2, pp. 105–113, 2000. View at Google Scholar · View at Scopus
  12. E. F. Irassar, V. L. Bonavetti, and M. González, “Microstructural study of sulfate attack on ordinary and limestone Portland cements at ambient temperature,” Cement and Concrete Research, vol. 33, no. 1, pp. 31–41, 2003. View at Publisher · View at Google Scholar · View at Scopus