Table of Contents
ISRN Polymer Science
Volume 2012, Article ID 767151, 5 pages
http://dx.doi.org/10.5402/2012/767151
Research Article

Plasma-Based Surface Modification of Polydimethylsiloxane for PDMS-PDMS Molding

Laboratório de Sistemas Integráveis, Escola Politécnica University da São Paulo, São Paulo 05508-010, SP, Brazil

Received 5 January 2012; Accepted 6 February 2012

Academic Editors: M. Patel and D. Pavel

Copyright © 2012 S. Lopera and R. D. Mansano. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. C. McDonald and G. M. Whitesides, “Poly(dimethylsiloxane) as a material for fabricating microfluidic devices,” Accounts of Chemical Research, vol. 35, no. 7, pp. 491–499, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Lee, S. Park, K. Choi, and G. Kim, “Nano-scale patterning using the roll typed UV-nanoimprint lithography tool,” Microelectronic Engineering, vol. 85, no. 5-6, pp. 861–865, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. F. Hamouda, G. Barbillon, S. Held et al., “Nanoholes by soft UV nanoimprint lithography applied to study of membrane proteins,” Microelectronic Engineering, vol. 86, no. 4-6, pp. 583–585, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Okada, M. Iwasa, K. I. Nakamatsu et al., “Evaluation of fluorinated diamond like carbon as antisticking layer by scanning probe microscopy,” Journal of Photopolymer Science and Technology, vol. 21, no. 4, pp. 597–599, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. N. Lucas, S. Demming, A. Jordan, P. Sichler, and S. Büttgenbach, “An improved method for double-sided moulding of PDMS,” Journal of Micromechanics and Microengineering, vol. 18, no. 7, Article ID 075037, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. B. H. Jo, L. M. Van Lerberghe, K. M. Motsegood, and D. J. Beebe, “Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer,” Journal of Microelectromechanical Systems, vol. 9, no. 1, pp. 76–81, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. R. A. Janelle, D. T. Chiu, R. J. Jackman et al., “Fabrication of topologically complex three-dimensional microfluidic systems in PDMS by rapid prototyping,” Analytical Chemistry, vol. 72, no. 14, pp. 3158–3164, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. A. F. Stalder, T. Melchior, M. Müller, D. Sage, T. Blu, and M. Unser, “Low-bond axisymmetric drop shape analysis for surface tension and contact angle measurements of sessile drops,” Colloids and Surfaces, A, vol. 364, no. 1–3, pp. 72–81, 2010. View at Publisher · View at Google Scholar · View at Scopus