Table of Contents Author Guidelines Submit a Manuscript
ISRN Forestry
Volume 2012 (2012), Article ID 923413, 8 pages
Research Article

Recycled Old Corrugated Container Fibers for Wood-Fiber Cement Sheets

Forest Products Laboratory (LPF), Brazilian Forest Service (SFB), 70818-900 Brasília, DF, Brazil

Received 19 January 2012; Accepted 11 February 2012

Academic Editors: F. Castedo-Dorado and S. Yildiz

Copyright © 2012 Divino Eterno Teixeira. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


Recycled pulp of old corrugated containers (OCCs) was studied as a possible fiber source for wood-fiber cement (WFC) sheets. This industry currently largely relies on kraft pulp, an expensive fiber source. Thus, WFC sheets were made using less costly OCC fibers utilizing various types of treatments including fiber fractionation (FF) and refining to 500 and 400 Canadian Standard Freeness (CSF) to determine the effect of these treatments on the sheets strength. Unprocessed virgin kraft fiber of radiata pine (Pinus radiata) was used as control for comparison purposes. The unprocessed OCC pulp furnish yielded an initial freeness of 635 CSF; after fractionating, however, it was increased to 754 CSF. OCC pulp presented a kappa number of 47, compared to 23.7 for P. radiata. Fractionating OCC pulp was effective in raising the range of long fibers in the stock from 68 percent to 85 percent, before and after fractionating, respectively. Results from WFC sheets made in laboratory showed that there was no significant difference in board strength among boards made with unprocessed OCC fibers, fractionated and refined OCC, and P. radiata fibers. However, sheet strength decreased when refined OCC fibers were used. The results suggest that OCC fibers can produce WFC sheets with desirable characteristics compared to those of unrefined virgin kraft fiber of P. radiata.