Table of Contents
ISRN Power Engineering
Volume 2013, Article ID 187686, 10 pages
http://dx.doi.org/10.1155/2013/187686
Research Article

Increase Performance of IPMSM by Combination of Maximum Torque per Ampere and Flux-Weakening Methods

1Department of Electrical and Electronic Engineering, Universiti Putra Malaysia, Selangor, Malaysia
2Department of Electrical Engineering, Research and Science Branch, Islamic Azad University, Kerman, Iran
3Department of Electrical and Electronic Engineering, Islamic Azad University, Bushehr Branch, Bushehr, Iran
4Department of Electrical and Electronic Engineering, Islamic Azad University, Majlesi Branch, Majlesi, Iran

Received 31 May 2013; Accepted 5 July 2013

Academic Editors: V. Fernao Pires and A. Gaouda

Copyright © 2013 Saman Toosi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. Yunusa, A. Dan-Isa, Y. A. Sai'd et al., “Effects of the number of rules on the quality of fuzzy logic control of induction motor,” International Journal of Applied Electronics in Physics & Robotics, vol. 1, pp. 14–17, 2013. View at Google Scholar
  2. A. Consoli and A. Abela, “Transient performance of permanent magnet AC motor drives,” IEEE Transactions on Industry Applications, vol. 22, no. 1, pp. 32–41, 1986. View at Google Scholar · View at Scopus
  3. T. M. Jahns, G. B. Kliman, and T. W. Neumann, “Interior permanent-magnet synchronous motors for adjustable-speed drives,” IEEE Transactions on Industry Applications, vol. 22, no. 4, pp. 738–747, 1986. View at Google Scholar · View at Scopus
  4. K. Nakamura, K. Saito, and O. Ichinokura, “Dynamic analysis of interior permanent magnet motor based on a magnetic circuit model,” IEEE Transactions on Magnetics, vol. 39, no. 5, pp. 3250–3252, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. C. Jo, J.-Y. Seol, and I.-J. Ha, “Flux-weakening control of IPM motors with significant effect of magnetic saturation and stator resistance,” IEEE Transactions on Industrial Electronics, vol. 55, no. 3, pp. 1330–1340, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. H. M. Kojabadi and G. Ahrabian, “Simulation and analysis of the interior permanent magnet synchronous motor as a brushless AC-drive,” Simulation Practice and Theory, vol. 7, no. 7, pp. 691–707, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. D. M. Lonel, Brushless Interior Permanent Magnet (IPM) Motors A New Solution for High Performance Appliances, A.O.smith corporate technology center, Milwaukee, 2008.
  8. A. Sathyan, N. Milivojevic, Y.-J. Lee, M. Krishnamurthy, and A. Emadi, “An FPGA-based novel digital PWM control scheme for BLDC motor drives,” IEEE Transactions on Industrial Electronics, vol. 56, no. 8, pp. 3040–3049, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. B. Argüello-Serrano and M. Vélez-Reyes, “Nonlinear control of a heating, ventilating, and air conditioning system with thermal load estimation,” IEEE Transactions on Control Systems Technology, vol. 7, no. 1, pp. 56–63, 1999. View at Publisher · View at Google Scholar · View at Scopus
  10. N. Lu, Y. L. Xie, Z. Huang et al., Air Conditioner Compressor Performance Model, Uinted states department of energy, 2008.
  11. M. F. Rahman, L. Zhong, and K. W. Lim, “A direct torque-controlled interior permanent magnet synchronous motor drive incorporating field weakening,” IEEE Transactions on Industry Applications, vol. 34, no. 6, pp. 1246–1253, 1998. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Hoque et al., “A novel approach for MTPA speed control of IPMSM drive,” in Proceedings of 2nd IEEE International Conference of Electrical & Computer Engineering, pp. 26–27, 2002.
  13. M. J. Hossain, M. S. Hossain, M. A. Hoque, and M. S. Anower, “A novel approach for flux weakening speed control of IPMSM drives,” in Proceedings of the 3rd International Conference on Electrical & Computer Engineering (ICECE '04), 2004.
  14. M. N. Uddin and F. Abera, “Efficiency optimisation based speed control of IPMSM drive,” International Journal of Industrial Electronics and Drives, vol. 1, pp. 34–41, 2009. View at Google Scholar
  15. M. Meyer and J. Böcker, “Optimum control for interior permanent magnet synchronous motors (ipmsm) in constant torque and flux weakening range,” in Proceedings of the 12th International Power Electronics and Motion Control Conference (EPE-PEMC '06), pp. 282–286, September 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Vaclavek and P. Blaha, “Interior permanent magnet synchronous machine field weakening control strategy-The analytical solution,” in Proceedings of the SICE Annual Conference International Conference on Instrumentation, Control and Information Technology, pp. 753–757, August 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. P. C. Krause, Analysis of Electric Machinery, McGraw-Hill, 1986.
  18. M. N. Uddin and M. A. Rahman, “Fuzzy logic based speed control of an IPM synchronous motor drive,” in Proceedings of the IEEE Canadian Conference on Electrical and Computer Engineering, pp. 1259–1264, May 1999. View at Scopus
  19. R. Krishnan, Electric Motor Drives Modeling, Analysis, and Control, Pearson Education, 2001.
  20. D. Žarko, D. Ban, and R. Klarić, Finite Element Approach to Calculation of Parameters of An Interior Permanent Magnet motor, 2007.
  21. K. Zhou and D. Wang, “Relationship between space-vector modulation and three-phase carrier-based PWM: a comprehensive analysis,” IEEE Transactions on Industrial Electronics, vol. 49, no. 1, pp. 186–196, 2002. View at Publisher · View at Google Scholar · View at Scopus
  22. M. N. Uddin, T. S. Radwan, and M. A. Rahman, “Performance of interior permanent magnet motor drive over wide speed range,” IEEE Transactions on Energy Conversion, vol. 72, pp. 31–33, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. P. Vaclavek and P. Blaha, “Interior permanent magnet synchronous machine field weakening control strategy—the analytical solution,” in Proceedings of the SICE Annual Conference International Conference on Instrumentation, Control and Information Technology, pp. 581–586, August 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Xu, F. Wang, J. Feng, and J. Xu, “Flux-weakening control of permanent magnet synchronous motor with direct torque control consideration variation of parameters,” in Proceedings of the 30th Annual Conference of IEEE Industrial Electronics Society (IECON '04), pp. 1323–1326, Busan, Korea, November 2004. View at Scopus
  25. Matlab, Simulink User Guide, 2009.