Table of Contents
ISRN Mechanical Engineering
Volume 2013 (2013), Article ID 194908, 10 pages
http://dx.doi.org/10.1155/2013/194908
Research Article

3D Heat Transfer Analysis of a Miniature Copper-Water Vapor Chamber with Wicked Pillars Array

1College of Physics, University of Chinese Academy of Sciences, 19A Yuquanlu Road, Shijingshan District, Beijing 100049, China
2Department of Mechanical Engineering, University of Turabo, Gurabo, PR 00778, USA
3Department of Mechanical Engineering, National Institute of Technology, Calicut, Kerala 673 601, India
4Laboratory of Advanced Thermal Management Technologies, College of Physics, University of Chinese Academy of Sciences, 19A Yuquanlu Road, Shijingshan District, Beijing 100049, China

Received 24 January 2013; Accepted 11 February 2013

Academic Editors: S. W. Chang, P. Dineva, K. Ismail, G. Juncu, and P. Reis

Copyright © 2013 Yong Jiang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Putra, Yanuar, and F. N. Iskandar, “Application of nanofluids to a heat pipe liquid-block and the thermoelectric cooling of electronic equipment,” Experimental Thermal and Fluid Science, vol. 35, no. 7, pp. 1274–1281, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Harmand, R. Sonan, M. Fakès, and H. Hassan, “Transient cooling of electronic components by flat heat pipes,” Applied Thermal Engineering, vol. 31, no. 11-12, pp. 1877–1885, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Mochizuki, T. Nguyen, K. Mashiko et al., “Practical application of heat pipe and vapor chamber for cooling high performance personal computer,” in Proceedings of the 13th International Heat Pipe Conference, pp. 448–454, 2004. View at Scopus
  4. M. Mochizuki, T. Nguyen, K. Mashiko et al., “Latest technology using micro heat pipes and vapor chamber for cooling personal computer,” in Proceedings of the 1st International Symposium on Micro & Nano Technology, 2004.
  5. Y. Koito, K. Motomatsu, H. Imura, M. Mochizuki, and Y. Saito, “Fundamental investigations on heat transfer characteristics of heat sinks with a vapor chamber,” in Proceedings of the 7th International Heat Pipe Symposium, pp. 247–251, 2003.
  6. R. Boukhanouf, A. Haddad, M. T. North, and C. Buffone, “Experimental investigation of a flat plate heat pipe performance using IR thermal imaging camera,” Applied Thermal Engineering, vol. 26, no. 17-18, pp. 2148–2156, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Xuan, Y. Hong, and Q. Li, “Investigation on transient behaviors of flat plate heat pipes,” Experimental Thermal and Fluid Science, vol. 28, no. 2-3, pp. 249–255, 2004. View at Publisher · View at Google Scholar
  8. Y. Koito, H. Imura, M. Mochizuki, Y. Saito, and S. Torii, “Numerical analysis and experimental verification on thermal fluid phenomena in a vapor chamber,” Applied Thermal Engineering, vol. 26, no. 14-15, pp. 1669–1676, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Hsieh, R. Lee, J. Shyu, and S. Chen, “Analytical solution of thermal resistance of vapor chamber heat sink with and without pillar,” Energy Conversion and Management, vol. 48, no. 10, pp. 2708–2717, 2007. View at Publisher · View at Google Scholar
  10. G. Carbajal, C. B. Sobhan, G. P. Peterson, D. T. Queheillalt, and H. N. G. Wadley, “Thermal response of a flat heat pipe sandwich structure to a localized heat flux,” International Journal of Heat and Mass Transfer, vol. 49, no. 21-22, pp. 4070–4081, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. G. Carbajal, C. B. Sobhan, G. P. Bud Peterson, D. T. Queheillalt, and H. N. G. Wadley, “A quasi-3D analysis of the thermal performance of a flat heat pipe,” International Journal of Heat and Mass Transfer, vol. 50, no. 21-22, pp. 4286–4296, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. D. T. Queheillalt, G. Carbajal, H. N. G. Wadley, and G. P. Peterson, “A multifunctional heat pipe sandwich panel structure,” International Journal of Heat and Mass Transfer, vol. 51, no. 1-2, pp. 312–326, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. W. S. Chang and G. T. Colwell, “Mathematical modeling of the transient operating characteristics of a low-temperature heat pipe,” Numerical Heat Transfer, vol. 8, no. 2, pp. 169–186, 1985. View at Google Scholar
  14. M. N. Chen and A. Faghri, “An analysis of the vapor flow and the heat conduction through the liquid—wick and pipe wall in a heat pipe with single or multiple heat sources,” International Journal of Heat and Mass Transfer, vol. 33, no. 9, pp. 1945–1955, 1990. View at Google Scholar · View at Scopus
  15. J. M. Tournier and M. S. El-Genk, “A heat pipe transient analysis model,” International Journal of Heat and Mass Transfer, vol. 37, no. 5, pp. 753–762, 1994. View at Google Scholar · View at Scopus
  16. Z. J. Zuo and A. Faghri, “Boundary element approach to transient heat pipe analysis,” Numerical Heat Transfer A, vol. 32, no. 3, pp. 205–220, 1997. View at Google Scholar · View at Scopus
  17. J. Li and G. P. Peterson, “3D heat transfer analysis in a loop heat pipe evaporator with a fully saturated wick,” International Journal of Heat and Mass Transfer, vol. 54, no. 17-18, pp. 564–574, 2011. View at Google Scholar
  18. J. Li, G. P. Peterson, and P. Cheng, “Three-dimensional analysis of heat transfer in a micro-heat sink with single phase flow,” International Journal of Heat and Mass Transfer, vol. 47, no. 19-20, pp. 4215–4231, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Qu and H. Y. Wu, “Flow visualization of silicon-based micro pulsating heat pipes,” Science China Technological Sciences, vol. 53, no. 4, pp. 984–990, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. J.-T. Feng, G.-P. Lin, and L.-Z. Bai, “Experimental investigation on operating instability of a dual compensation chamber loop heat pipe,” Science in China E, vol. 52, no. 8, pp. 2316–2322, 2009. View at Publisher · View at Google Scholar · View at Scopus