Table of Contents
ISRN Industrial Engineering
Volume 2013, Article ID 462174, 11 pages
http://dx.doi.org/10.1155/2013/462174
Review Article

Practical Applications of Taguchi Method for Optimization of Processing Parameters for Plastic Injection Moulding: A Retrospective Review

1School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia
2Department of Mould Technology, Kolej Kemahiran Tinggi MARA, Balik Pulau, Genting, 11000 Balik Pulau, Penang, Malaysia

Received 18 April 2013; Accepted 6 June 2013

Academic Editors: J. Ren and H. Singh

Copyright © 2013 Ng Chin Fei et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ng Chin Fei, Nik Mizamzul Mehat, and Shahrul Kamaruddin, “Practical Applications of Taguchi Method for Optimization of Processing Parameters for Plastic Injection Moulding: A Retrospective Review,” ISRN Industrial Engineering, vol. 2013, Article ID 462174, 11 pages, 2013. https://doi.org/10.1155/2013/462174.