Table of Contents
ISRN Tribology
Volume 2013 (2013), Article ID 482604, 6 pages
http://dx.doi.org/10.5402/2013/482604
Research Article

Performance of Magnetic-Fluid-Based Squeeze Film between Longitudinally Rough Elliptical Plates

1Department of Mathematics, M. K. Bhavnagar University, Bhavnagar, Gujarat 364002, India
2Department of Mathematics, S. P. University, Vallabh Vidyanagar, Gujarat 388120, India

Received 20 November 2012; Accepted 17 December 2012

Academic Editors: J. De Vicente, N. Gerolymos, and J. H. Jang

Copyright © 2013 P. I. Andharia and G. M. Deheri. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. R. Archibald, “Load capacity and time relations for squeeze films,” Transactions of the ASME, vol. D78, pp. 231–245, 1956. View at Google Scholar
  2. H. Wu, “Squeeze film behaviour for porous annular disks,” Transactions of ASME, vol. F92, pp. 593–596, 1970. View at Google Scholar
  3. H. Wu, “An analysis of the squeeze film between porous rectangular plates,” Transactions of ASME, vol. F94, pp. 64–68, 1972. View at Google Scholar
  4. J. Prakash and S. Vij, “Load capacity and time-height relations for squeeze films between porous plates,” Wear, vol. 24, no. 3, pp. 309–322, 1973. View at Google Scholar · View at Scopus
  5. P. D. S. Verma, “Magnetic fluid based squeeze film,” International Journal of Engineering Science, vol. 24, no. 3, pp. 395–401, 1986. View at Publisher · View at Google Scholar
  6. M. V. Bhat and G. M. Deberi, “Squeeze film behaviour in porous annular discs lubricated with magnetic fluid,” Wear, vol. 151, no. 1, pp. 123–128, 1991. View at Google Scholar · View at Scopus
  7. M. V. Bhat and G. M. Deheri, “Magnetic fluid based squeeze film between two curved circular plates,” Bulletin of Calcutta Mathematical Society, vol. 85, pp. 521–524, 1992. View at Google Scholar
  8. R. M. Patel and G. M. Deheri, “Magnetic fluid based squeeze film between porous conical plates,” Industrial Lubrication and Tribology, vol. 59, no. 3, pp. 143–147, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. M. G. Davies, “The generation of pressure between rough fluid lubricated, moving, deformable surfaces,” Lubrication Engineering, vol. 19, p. 246, 1963. View at Google Scholar
  10. R. A. Burton, “Effect of two dimensional sinusoidal roughness on the load support characteristics of a lubricant film,” Journal of Basic Engineering, vol. 85, pp. 258–264, 1963. View at Publisher · View at Google Scholar
  11. A. G. M. Michell, Lubrication, Its Principle and Practice, Blackie, London, UK, 1950.
  12. K. C. Tonder, “Surface distributed waviness and roughness,” in Proceedings of the 1st World Conference in Industrial Tribology, vol. A3, pp. 1–8, New Delhi, India, 1972.
  13. S. T. Tzeng and E. Saibel, “Surface roughness effect on slider bearing lubrication,” Journal of Lubrication Technology, vol. 10, pp. 334–338, 1967. View at Google Scholar
  14. H. Christensen and K. C. Tonder, Tribology of Rough Surfaces: Stochastic Models of Hydrodynamic Lubrication, SINTEF Report, no. 10/69–18, 1969.
  15. H. Christensen and K. C. Tonder, Tribology of Rough Surfaces: Parametric Study and Comparison of Lubrication Models, SINTEF Report, no. 22/69–18, 1969.
  16. H. Christensen and K. C. Tonder, “Hydrodynamic lubrication of rough bearing surfaces of finite width,” Journal of Lubrication Technology, vol. 93, no. 3, 1971. View at Google Scholar · View at Scopus
  17. L. L. Ting, “Engagement behaviour of lubricated porous annular disks part I: squeeze film phase, surface roughness and elastic deformation effects,” Wear, vol. 34, no. 2, pp. 159–182, 1975. View at Google Scholar · View at Scopus
  18. J. Prakash and K. Tiwari, “Lubrication of a porous bearing with surface corrugations,” Journal of Lubrication Technology, vol. 104, pp. 127–134, 1982. View at Publisher · View at Google Scholar
  19. J. Prakash and K. Tiwari, “Roughness effects in porous circular squeeze—plates with arbitrary wall thickness,” Journal of Lubrication Technology, vol. 105, no. 1, pp. 90–95, 1983. View at Google Scholar · View at Scopus
  20. B. L. Prajapati, “Behaviour of squeeze film between rotating porous circular plates: surface roughness and elastic deformation effects,” Pure and Applied Mathematical Sciences, vol. 33, no. 1/2, pp. 27–36, 1991. View at Google Scholar
  21. B. L. Prajapati, “Squeeze film behaviour between rotating porous circular plates with a concentric circular pocket: surface roughness and elastic deformation effects,” Wear, vol. 152, no. 2, pp. 301–307, 1992. View at Google Scholar · View at Scopus
  22. S. K. Guha, “Analysis of dynamic characteristics of hydrodynamic journal bearings with isotropic roughness effects,” Wear, vol. 167, no. 2, pp. 173–179, 1993. View at Google Scholar · View at Scopus
  23. J. L. Gupta and G. M. Deheri, “Effect of roughness on the behavior of squeeze film in a spherical bearing,” Tribology Transactions, vol. 39, no. 1, pp. 99–102, 1996. View at Google Scholar · View at Scopus
  24. P. I. Andharia, J. L. Gupta, and G. M. Deheri, “Effect of longitudinal surface roughness on hydrodynamic lubrication of slider bearings,” in Proceedings of the 10th International Conference on Surface Modification Technologies, pp. 872–880, The Institute of Materials, 1997.
  25. P. I. Andharia and G. Deheri, “Longitudinal roughness effect on magnetic fluid-based squeeze film between conical plates,” Industrial Lubrication and Tribology, vol. 62, no. 5, pp. 285–291, 2010. View at Publisher · View at Google Scholar · View at Scopus