Table of Contents
ISRN Electronics
Volume 2013, Article ID 691930, 5 pages
http://dx.doi.org/10.1155/2013/691930
Research Article

Real-Time Implementation of Change Detection for Automated Video Surveillance System

1CSIR-Central Electronics Engineering Research Institute (CSIR-CEERI), Pilani, Rajasthan 333031, India
2Electronic Science Department, Kurukshetra University, Kurukshetra, Haryana 136119, India

Received 10 April 2013; Accepted 9 May 2013

Academic Editors: M. Hopkinson, M. Rawski, and M. Terauchi

Copyright © 2013 Sanjay Singh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Change detection is one of the several important problems in the design of any automated video surveillance system. Appropriate selection of frames of significant changes can minimize the communication and processing overheads for such systems. This research presents the design of a VLSI architecture for change detection in a video sequence and its implementation on Virtex-IIPro FPGA platform. Clustering-based scheme is used for change detection. The proposed system is designed to meet the real-time requirements of video surveillance applications. It robustly detects the changes in a video stream in real time at 25 frames per second (fps) in gray scale CIF size video.