Table of Contents
ISRN Tribology
Volume 2013, Article ID 724307, 10 pages
http://dx.doi.org/10.5402/2013/724307
Research Article

Numerical Solution of the MHD Reynolds Equation for Squeeze-Film Lubrication between Porous and Rough Rectangular Plates

1Department of Mathematics, Bangalore University, Bangalore 560 001, India
2Department of Mathematics, Sri Siddhartha Institute of Technology, Tumkur 572 105, India
3Department of Mathematics, Siddaganga Institute of Technology (SIT), Tumkur 572 103, India

Received 13 December 2012; Accepted 5 January 2013

Academic Editors: J. H. Jang and S. Xiong

Copyright © 2013 Ramesh B. Kudenatti et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. R. Maki, D. C. Kuzma, and R. L. Donnelly, “Magnetohydrodynamic lubrication flow between parallel plates,” Journal of Fluid Mechanics, vol. 26, no. 3, pp. 537–543, 1966. View at Publisher · View at Google Scholar
  2. M. I. Anwar and C. M. Rodkiewicz, “Nonuniform magnetic field effects in MHD slider bearing,” Journal of Lubrication Technology, vol. 94, no. 1, pp. 101–105, 1972. View at Google Scholar · View at Scopus
  3. N. C. Das, “Study of optimum load capacity of slider bearings lubricated with power law fluids,” Tribology International, vol. 32, no. 8, pp. 435–441, 1999. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Kamiyama, “Magnetohydrodynamic journal bearing (report 1),” Journal of Lubrication Technology, vol. 91, no. 3, pp. 380–389, 1969. View at Publisher · View at Google Scholar
  5. M. Malik and D. V. Singh, “Analysis of finite magnetohydrodynamic journal bearings,” Wear, vol. 64, no. 2, pp. 273–280, 1980. View at Publisher · View at Google Scholar · View at Scopus
  6. J. B. Shukla, “Hydromagnetic theory for squeeze films,” Journal of Basic Engineering, vol. 87, no. 1, pp. 142–144, 1965. View at Publisher · View at Google Scholar
  7. E. A. Hamza, “Magnetohydrodynamic effects on a fluid film squeezed between two rotating surfaces,” Journal of Physics D, vol. 24, no. 4, pp. 547–554, 1991. View at Publisher · View at Google Scholar · View at Scopus
  8. N. M. Bujurke and R. B. Kudenatti, “MHD lubrication flow between rough rectangular plates,” Fluid Dynamics Research, vol. 39, no. 4, pp. 334–345, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Wu, “Analysis of the squeeze film between porous rectangular plates,” Journal of Lubrication Technology, vol. 94, no. 1, pp. 64–68, 1972. View at Google Scholar · View at Scopus
  10. J. Prakash and S. K. Vij, “Load capacity and time-height relations for squeeze films between porous plates,” Wear, vol. 24, no. 3, pp. 309–322, 1973. View at Google Scholar · View at Scopus
  11. U. Srinivasan, “The analysis of a double-layered porous slider bearing,” Wear, vol. 42, no. 2, pp. 205–215, 1977. View at Google Scholar · View at Scopus
  12. R. S. Gupta and V. K. Kapur, “Centrifugal effects in hydrostatic porous thrust bearings,” Journal of Lubrication Technology, vol. 101, no. 3, pp. 381–392, 1979. View at Publisher · View at Google Scholar
  13. N. B. Naduvinamani, S. T. Fathima, and S. Jamal, “Effect of roughness on hydromagnetic squeeze films between porous rectangular plates,” Tribology International, vol. 43, no. 11, pp. 2145–2151, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Christensen, “Stochastic models for hydrodynamic lubrication of rough surfaces,” Proceedings of the Institution of Mechanical Engineers, vol. 184, pp. 1022–1033, 1969. View at Google Scholar
  15. H. Christensen and K. Tønder, “Tribology of rough surfaces, parametric study and comparison of lubrication models,” SINTEF Research Report No. 22/69-18, 1969. View at Google Scholar
  16. L. S. H. Chow and H. S. Cheng, “The effect of surface roughness on the average film thickness between lubricated rollers,” Journal of Lubrication Technology, vol. 98, no. 1, pp. 117–124, 1976. View at Google Scholar · View at Scopus
  17. N. Patir and H. S. Cheng, “An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication,” Journal of Lubrication Technology, vol. 100, no. 1, pp. 12–17, 1978. View at Google Scholar · View at Scopus
  18. N. M. Bujurke and N. B. Naduvinamani, “A note on squeeze film between rough anisotropic porous rectangular plates,” Wear, vol. 217, no. 2, pp. 225–230, 1998. View at Publisher · View at Google Scholar · View at Scopus
  19. W. Litwin, “Influence of surface roughness topography on properties of water-lubricated polymer bearings: experimental research,” Tribology Transactions, vol. 54, no. 3, pp. 351–361, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. V. K. Stokes, “Couple stresses in fluids,” Physics of Fluids, vol. 9, no. 9, pp. 1709–1715, 1966. View at Publisher · View at Google Scholar
  21. H. L. Chiang, C. H. Hsu, and J. R. Lin, “Lubrication performance of finite journal bearings considering effects of couple stresses and surface roughness,” Tribology International, vol. 37, no. 4, pp. 297–307, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. N. B. Naduvinamani and S. B. Patil, “Combined effects of surface roughness and couple stresses on static and dynamic behaviour of squeeze film lubrication of porous journal bearings,” Tribology—Materials, Surfaces and Interfaces, vol. 1, no. 3, pp. 145–153, 2007. View at Publisher · View at Google Scholar
  23. N. M. Bujurke, D. P. Basti, and R. B. Kudenatti, “Surface roughness effects on squeeze film behavior in porous circular disks with couple stress fluid,” Transport in Porous Media, vol. 71, no. 2, pp. 185–197, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. S. F. Alyaqout and A. A. Elsharkawy, “Optimal film shape for two-dimensional slider bearings lubricated with couple stress fluids,” Tribology International, vol. 44, no. 3, pp. 336–342, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. R. B. Kudenatti, D. P. Basti, and N. M. Bujurke, “Numerical solution of the MHD Reynolds equation for squeeze film lubrication between two parallel surfaces,” Applied Mathematics and Computation, vol. 218, no. 18, pp. 9372–9382, 2012. View at Publisher · View at Google Scholar
  26. V. T. Morgan and A. Cameron, “The mechanism of lubrication on porous metal bearings,” in Proceedings of the Conference on Lubrication and Wear, vol. 89, pp. 151–157, Institute of Mechanical Engineers, London, UK, 1957.
  27. N. M. Bujurke and R. B. Kudenatti, “Multigrid solution of modified reynolds equation incorporating poroelasticity and couple stresses,” Journal of Porous Media, vol. 10, no. 2, pp. 125–136, 2007. View at Publisher · View at Google Scholar · View at Scopus