Table of Contents
ISRN Electrochemistry
Volume 2013, Article ID 851921, 5 pages
http://dx.doi.org/10.1155/2013/851921
Research Article

Improved Performance of Hydrothermally Synthesized by Ball Milling as a Positive Electrode for Li Ion Battery

Department of Material and Environmental Engineering, Hakodate National College of Technology, 14-1 Tokura-cho, Hokkaido, Hakodate 042-8501, Japan

Received 4 December 2012; Accepted 23 December 2012

Academic Editors: A. I. Bhatt, X. He, A. A. Moya, C. M. Muller, and W. Xing

Copyright © 2013 Masashi Kotobuki. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Mizuno, M. Kotobuki, H. Munakata, and K. Kanamura, “Effect of carbon source on electrochemical performance of carbon coated LiMnPO4 cathode,” Journal of the Ceramic Society of Japan, vol. 117, no. 1371, pp. 1225–1228, 2009. View at Google Scholar · View at Scopus
  2. H. Fang, L. Li, and G. Li, “Hydrothermal synthesis of electrochemically active LiMnPO4,” Chemistry Letters, vol. 36, no. 3, pp. 436–437, 2007. View at Publisher · View at Google Scholar
  3. C. Delacourt, L. Laffont, R. Bouchet et al., “Toward understanding of electrical limitations (electronic, ionic) in LiMPO4 (M = Fe, Mn) electrode materials,” Journal of the Electrochemical Society, vol. 152, no. 5, pp. A913–A921, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Yonemura, A. Yamada, Y. Takei, N. Sonoyama, and R. Kanno, “Comparative kinetic study of olivine LixMPO4 (M = Fe, Mn),” Journal of the Electrochemical Society, vol. 151, no. 9, pp. A1352–A1356, 2004. View at Publisher · View at Google Scholar · View at Scopus
  5. Z. Chen and J. R. Dahn, “Reducing carbon in LiFePO4/C composite electrodes to maximize specific energy, volumetric energy, and tap density,” Journal of the Electrochemical Society, vol. 149, no. 9, pp. A1184–A1189, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. R. Dominko, M. Bele, M. Gaberscek et al., “Impact of the carbon coating thickness on the electrochemical performance of LiFePO4/C composites,” Journal of the Electrochemical Society, vol. 152, no. 3, pp. A607–A610, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Moskon, R. Dominko, R. Cerc-Korosec, M. Gaberscek, and J. Jamnik, “Morphology and electrical properties of conductive carbon coatings for cathode materials,” Journal of Power Sources, vol. 174, no. 2, pp. 683–688, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Nakano, K. Dokko, S. Koizumi, H. Tannai, and K. Kanamura, “Hydrothermal synthesis of carbon-coated LiFePO4 and its application to lithium polymer battery,” Journal of the Electrochemical Society, vol. 155, no. 12, pp. A909–A914, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Delacourt, P. Poizot, M. Morcrette, J. M. Tarascon, and C. Masquelier, “One-step low-temperature route for the preparation of electrochemically active LiMnPO4 powders,” Chemistry of Materials, vol. 16, no. 1, pp. 93–99, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. T. Drezen, N. H. Kwon, P. Bowen, I. Teerlinck, M. Isono, and I. Exnar, “Effect of particle size on LiMnPO4 cathodes,” Journal of Power Sources, vol. 174, no. 2, pp. 949–953, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. S. K. Martha, B. Markovsky, J. Grinblat et al., “LiMnPO4 as an advanced cathode material for rechargeable lithium batteries,” Journal of the Electrochemical Society, vol. 156, no. 7, pp. A541–A552, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. M. E. Rabanal, M. C. Gutierrez, F. Garcia-Alvarado, E. C. Gonzalo, and M. E. Arroyo-de Dompablo, “Improved electrode characteristics of olivine-LiCoPO4 processed by high energy milling,” Journal of Power Sources, vol. 160, no. 1, pp. 523–528, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Nakano, K. Dokko, S. Koizumi, H. Tannai, and K. Kanamura, “Hydrothermal synthesis of carbon-coated LiFePO4 and its application to lithium polymer battery,” Journal of the Electrochemical Society, vol. 155, no. 12, pp. A909–A914, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Kotobuki, Y. Mizuno, H. Munakata, and K. Kanamura, “Electrochemical properies of hydrothermally synthesized LiCopO4 as a high voltage cathode material for lithium secondary battery,” Phosphorus Research Bulletin, vol. 24, pp. 12–15, 2010. View at Publisher · View at Google Scholar
  15. K. Dokko, K. Shiraishi, and K. Kanamura, “Identification of surface impurities on LiFePO4 particles prepared by a hydrothermal process,” Journal of the Electrochemical Society, vol. 152, no. 11, pp. A2199–A2202, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. K. Dokko, S. Koizumi, and K. Kanamura, “Electrochemical reactivity of LiFePO4 prepared by hydrothermal method,” Chemistry Letters, vol. 35, no. 3, pp. 338–339, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. K. Dokko, S. Koizumi, K. Sharaishi, and K. Kanamura, “Electrochemical properties of LiFePO4 prepared via hydrothermal route,” Journal of Power Sources, vol. 165, no. 2, pp. 656–659, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Ait Salah, A. Mauger, K. Zaghib et al., “Reduction Fe3+ of impurities in LiFePO4 from pyrolysis of organic precursor used for carbon deposition,” Journal of the Electrochemical Society, vol. 153, no. 9, pp. A1692–A1701, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. R. L. McCreery, “Carbon electrodes: structural effects on electron transfer kinetics,” in Electroanalytical Chemistry, A. J. Bard, Ed., vol. 17, Marcel Dekker, New York, NY, USA, 1991. View at Google Scholar
  20. W. F. Howard and R. M. Spotnitz, “Theoretical evaluation of high-energy lithium metal phosphate cathode materials in Li-ion batteries,” Journal of Power Sources, vol. 165, no. 2, pp. 887–891, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. G. T. K. Fey, Y. G. Chen, and H. M. Kao, “Electrochemical properties of LiFePO4 prepared via ball-milling,” Journal of Power Sources, vol. 189, no. 1, pp. 169–178, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. G. Xia, Q. Zhang, H. Y. Wang, H. Nakamura, H. Noguchi, and M. Yoshio, “Improved cycling performance of oxygen-stoichiometric spinel Li1+xAlyMn2-x-yO4+δ at elevated temperature,” Electrochimica Acta, vol. 52, no. 14, pp. 4708–4714, 2007. View at Publisher · View at Google Scholar
  23. G. Amatuci and J. M. Tarascon, “Optimization of insertion compounds such as LiMn2O4 for Li-Ion batteries,” Journal of The Electrochemical Society, vol. 149, no. 12, pp. K31–K46, 2002. View at Publisher · View at Google Scholar
  24. Y. G. Guo, J. S. Hu, and L. J. Wan, “Nanostructured materials for electrochemical energy conversion and storage devices nanostructured materials for electrochemical energy conversion and storage devices,” Advanced Materials, vol. 20, no. 15, pp. 2878–2887, 2008. View at Publisher · View at Google Scholar