Table of Contents
ISRN Electrochemistry
Volume 2014 (2014), Article ID 359019, 12 pages
http://dx.doi.org/10.1155/2014/359019
Research Article

Enhanced Structural Integrity and Electrochemical Performance of AlPO4-Coated MoO2 Anode Material for Lithium-Ion Batteries

1Institute of Functional Nanomaterials, University of Puerto Rico, Rio Piedras Campus, San Juan, PR 00931-3334, USA
2Department of Physics, University of Puerto Rico-Rio Piedras Campus, San Juan, PR 00936-8377, USA
3Center for Advanced Nanoscale Materials, University Research Center, University of Puerto Rico-Rio Piedras Campus, San Juan, PR 00931-3346, USA
4Department of Chemistry, University of Puerto Rico, Rio Piedras Campus, San Juan, PR 00931-3346, USA

Received 24 December 2013; Accepted 15 January 2014; Published 4 March 2014

Academic Editors: S.-M. Lee and E. Vallés

Copyright © 2014 José I. López-Pérez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Scrosati, “Recent advances in lithium ion battery materials,” Electrochimica Acta, vol. 45, no. 15-16, pp. 2461–2466, 2000. View at Google Scholar · View at Scopus
  2. B. Kang and G. Ceder, “Battery materials for ultrafast charging and discharging,” Nature, vol. 458, no. 7235, pp. 190–193, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. Q. Tang, Z. Shan, L. Wang, and X. Qin, “MoO2-graphene nanocomposite as anode material for lithium-ion batteries,” Electrochimica Acta, vol. 79, pp. 148–153, 2012. View at Publisher · View at Google Scholar
  4. V. Pralong, “Lithium intercalation into transition metal oxides: a route to generate new ordered rock salt type structure,” Progress in Solid State Chemistry, vol. 37, no. 4, pp. 262–277, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. W. C. West, J. Soler, M. C. Smart et al., “Electrochemical behavior of layered solid solution Li2MnO3-LiMO2 (M Ni, Mn, Co) li-ion cathodes with and without alumina coatings,” Journal of the Electrochemical Society, vol. 158, no. 8, pp. A883–A889, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Sun, X. Ma, C. Wang, and X. Han, “Effect of AlPO4 coating on the electrochemical properties of LiNi0.8Co0.2O2 cathode material,” Journal of Alloys and Compounds, vol. 453, no. 1-2, pp. 352–355, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. S. T. Myung and K. Izumi, “Role of alumina coating on Li−Ni−Co−Mn−O particles as positive electrode material for lithium-ion batteries,” Chemistry of Materials, vol. 17, pp. 3695–3704, 2005. View at Publisher · View at Google Scholar
  8. A. M. Kannan, L. Rabenberg, and A. Manthiram, “High capacity surface-modified LiCoO2 cathodes for lithium-ion batteries,” Electrochemical and Solid-State Letters, vol. 6, no. 1, pp. A16–A18, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Cao, B. J. Xia, Y. Zhang, and N. X. Xu, “LiAlO2-coated LiCoO2 as cathode material for lithium ion batteries,” Solid State Ionics, vol. 176, no. 9-10, pp. 911–914, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Wu and A. Manthiram, “Effect of surface modifications on the layered solid solution cathodes (1-z) Li[Li1/3Mn2/3]O2 − (z) Li[Mn0.5-yNi0.5-yCo2y]O2,” Solid State Ion, vol. 180, pp. 50–56, 2009. View at Publisher · View at Google Scholar
  11. J. Ying, C. Wan, and C. Jiang, “Surface treatment of LiNi0.8Co0.2O2 cathode material for lithium secondary batteries,” Journal of Power Sources, vol. 102, no. 1-2, pp. 162–166, 2001. View at Publisher · View at Google Scholar · View at Scopus
  12. A. M. Kannan and A. Manthiram, “Surface/chemically modified LiMn2O4 cathodes for lithium-ion batteries,” Electrochemical and Solid-State Letters, vol. 5, no. 7, pp. A167–A169, 2002. View at Publisher · View at Google Scholar · View at Scopus
  13. B. Hu, X. Wang, Y. Wang et al., “Effects of amorphous AlPO4 coating on the electrochemical performance of BiF3 cathode materials for lithium-ion batteries,” Power Sources, vol. 218, pp. 204–211, 2012. View at Publisher · View at Google Scholar
  14. J. Cho, Y.-W. Kim, B. Kim, J.-G. Lee, and B. Park, “A breakthrough in the safety of lithium secondary batteries by coating the cathode material with AIPO4 nanoparticles,” Angewandte Chemie (International Edition), vol. 42, no. 14, pp. 1618–1621, 2003. View at Publisher · View at Google Scholar · View at Scopus
  15. K. S. Tan, M. V. Reddy, G. V. S. Rao, and B. V. R. Chowardi, “Effect of AlPO4-coating on cathodic behaviour of Li(Ni0.8Co0.2)O2,” Journal of Power Sources, vol. 141, pp. 129–142, 2005. View at Publisher · View at Google Scholar
  16. J. Y. Shi, C.-W. Yi, and K. Kim, “Improved electrochemical performance of AlPO4-coated LiMn1.5Ni0.5O4 electrode for lithium-ion batteries,” Journal of Power Sources, vol. 195, no. 19, pp. 6860–6866, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. L. F. Jiao, L. Liu, J. L. Sun et al., “Effect of AlPO4 nanowire coating on the electrochemical properties of LiV3O8 cathode material,” Journal of Physical Chemistry C, vol. 112, no. 46, pp. 18249–18254, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Manthiram and Y. Wu, “Effect of surface modifications on the layered solid solution cathodes (1-z) Li[Li1/3Mn2/3]O2-(z) Li[Mn0.5−y Ni0.5−y Co2y]O2,” Solid State Ion, vol. 180, pp. 50–56, 2009. View at Publisher · View at Google Scholar
  19. J. Cho, “Correlation between AlPO4 nanoparticle coating thickness on LiCoO2 cathode and thermal stability,” Electrochimica Acta, vol. 48, no. 19, pp. 2807–2811, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. M. Sun, X. L. Hu, W. Luo, and Y. H. Huang, “Self-assembled hierarchical MoO2/graphene nanoarchitectures and their application as a high-performance anode material for lithium-ion batteries,” ACS Nano, vol. 5, no. 9, pp. 7100–7107, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. P. Poizot, S. Laruelle, S. Grugeon, L. Dupont, and J.-M. Tarascon, “Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries,” Nature, vol. 407, no. 6803, pp. 496–499, 2000. View at Publisher · View at Google Scholar · View at Scopus
  22. T.-J. Kim, D. Son, J. Cho, B. Park, and H. Yang, “Enhanced electrochemical properties of SnO2 anode by AlPO4 coating,” Electrochimica Acta, vol. 49, no. 25, pp. 4405–4410, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. Y.-K. Sun, S.-W. Cho, S.-W. Lee, C. S. Yoon, and K. Amine, “AlF3-coating to improve high voltage cycling performance of Li[Ni1/3Co1/3Mn1/3]O2 cathode materials for lithium secondary batteries,” Journal of the Electrochemical Society, vol. 154, no. 3, pp. A168–A172, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. D. Liu, Z. He, and X. Liu, “Increased cycling stability of AlPO4-coated LiMn2O4 for lithium ion batteries,” Materials Letters, vol. 61, no. 25, pp. 4703–4706, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. H. Shi, J. Barker, M. Y. Saïdi, and R. Koksbang, “Structure and lithium intercalation properties of synthetic and natural graphite,” Journal of the Electrochemical Society, vol. 143, no. 11, pp. 3466–3472, 1996. View at Google Scholar · View at Scopus
  26. T. Theivasanthi and M. Alagar, “X-ray diffraction studies of copper nanopowder,” Archives of Physics Research, vol. 1, pp. 112–117, 2010. View at Google Scholar
  27. C.-H. Doh, H.-M. Shin, D.-H. Kim et al., “Improved anode performance of thermally treated SiO/C composite with an organic solution mixture,” Electrochemistry Communications, vol. 10, no. 2, pp. 233–237, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. Z. H. Lu and J. R. Dahn, “Understanding the anomalous capacity of Li / Li [ NixLi (1 / 3 − 2x /3) Mn(2 / 3 − x / 3)]  O2 cells using in situ x-ray diffraction and electrochemical studies,” Journal of the Electrochemical Society, vol. 149, pp. A815–A822, 2002. View at Publisher · View at Google Scholar
  29. C. P. Grey, W.-S. Yoon, J. Reed, and G. Ceder, “Electrochemical activity of Li in the transition-metal sites of O3 Li[Li(1-2x)/3Mn(2-x)/3Nix]O2,” Electrochemical and Solid-State Letters, vol. 7, no. 9, pp. A290–A293, 2004. View at Publisher · View at Google Scholar · View at Scopus
  30. J. R. Mueller-Neuhaus, R. A. Dunlap, and J. R. Dahn, “Understanding irreversible capacity in LixNi1-γFe1-γO2 cathode materials,” Journal of the Electrochemical Society, vol. 147, no. 10, pp. 3598–3605, 2000. View at Google Scholar · View at Scopus
  31. W. Luo, X. Hu, Y. Sun, and Y. Huang, “Electrospinning of carbon-coated MoO2 nanofibers with enhanced lithium-storage properties,” Physical Chemistry Chemical Physics, vol. 13, pp. 16735–16740, 2011. View at Publisher · View at Google Scholar
  32. J. R. Dahn and W. R. McKinnon, “Structure and electrochemistry of LixMoO2,” Solid State Ionics, vol. 23, no. 1-2, pp. 1–7, 1987. View at Google Scholar · View at Scopus
  33. Y. Liang, J. Sun, S. Yang, Z. Yi, and Y. Zhou, “Preparation, characterization and lithium-intercalation performance of different morphological molybdenum dioxide,” Materials Chemistry and Physics, vol. 93, pp. 395–398, 2005. View at Publisher · View at Google Scholar
  34. B.-C. Park, H.-B. Kim, S.-T. Myung et al., “Improvement of structural and electrochemical properties of AlF3-coated Li[Ni1/3Co1/3Mn1/3]O2 cathode materials on high voltage region,” Journal of Power Sources, vol. 178, no. 2, pp. 826–831, 2008. View at Publisher · View at Google Scholar · View at Scopus
  35. G. Singh, R. Thomas, A. Kumar, R. S. Katiyar, and A. Manivannan, “Electrochemical and structural investigations on ZnO treated 0.5 Li2MnO3-0.5LiMn0.5Ni0.5O2 layered composite cathode material for lithium ion battery,” Journal of the Electrochemical Society, vol. 159, no. 4, pp. A470–A478, 2012. View at Publisher · View at Google Scholar · View at Scopus
  36. A. R. Armstrong, M. Holzapfel, P. Novák, M. Thackeray, and P. Bruce, “Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O6,” Journal of the American Chemical Society, vol. 128, pp. 8694–88698, 2006. View at Publisher · View at Google Scholar
  37. G. Li, Z. Yang, and W. Yang, “Effect of FePO4 coating on electrochemical and safety performance of LiCoCO2 as cathode material for Li-ion batteries,” Journal of Power Sources, vol. 183, no. 2, pp. 741–748, 2008. View at Publisher · View at Google Scholar · View at Scopus
  38. B. V. Ratnakumar, M. C. Smart, and S. Surampudi, “Electrochemical impedance spectroscopy and its applications to lithium ion cells,” ChemInform, vol. 33, p. 229, 2009. View at Google Scholar
  39. M. D. Levi, D. Aurbach, G. Salitra et al., “Solid-state electrochemical kinetics of Li-ion intercalation into Li1-xCoO2: simultaneous application of electroanalytical techniques SSCV, PITT, and EIS,” Journal of the Electrochemical Society, vol. 146, no. 4, pp. 1279–1289, 1999. View at Publisher · View at Google Scholar · View at Scopus
  40. G. Ning, B. Haran, and B. N. Popov, “Capacity fade study of lithium-ion batteries cycled at high discharge rates,” Journal of Power Sources, vol. 117, no. 1-2, pp. 160–169, 2003. View at Publisher · View at Google Scholar · View at Scopus
  41. J. Liu and A. Manthiram, “Understanding the improvement in the electrochemical properties of surface modified 5 V LiMn1.42Ni0.42Co0.16O4 spinel cathodes in lithium-ion cells,” Chemistry of Materials, vol. 21, pp. 1695–1707, 2009. View at Publisher · View at Google Scholar
  42. S. Sivaprakash and S. B. Majumder, “Spectroscopic analyses of 0.5Li[Ni0.8Co0.15Zr0.05]O2-0.5Li[Li1/3Mn2/3]O2 composite cathodes for lithium rechargeable batteries,” Solid State Ionics, vol. 181, no. 15-16, pp. 730–739, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. A. Chen, C. Li, R. Tang, L. Yin, and Y. Qi, “MoO2-ordered mesoporous carbon hybrids as anode materials with highly improved rate capability and reversible capacity for lithium-ion battery,” Physical Chemistry Chemical Physics, vol. 15, pp. 13601–13610, 2013. View at Publisher · View at Google Scholar
  44. M. C. Smart, B. L. Lucht, and B. V. Ratnakumar, “Electrochemical characteristics of MCMB and LiNix Co1-x O2 electrodes in electrolytes with stabilizing additives,” Journal of the Electrochemical Society, vol. 155, no. 8, pp. A557–A568, 2008. View at Publisher · View at Google Scholar · View at Scopus