Synthesis and Antimicrobial Screening of Novel 4-Substituted Phenyl-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thiones

Bhandari, Namratha; Gaonkar, Santosh L.

doi:https://doi.org/10.1155/2014/439243

International Scholarly Research Notices

On this page

Abstract Introduction Materials and Methods Results and Discussion Conclusion Acknowledgments References Copyright Related Articles

Research Article | Open Access

Volume 2014 | Article ID 439243 | https://doi.org/10.1155/2014/439243

Synthesis and Antimicrobial Screening of Novel 4-Substituted Phenyl-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thiones

Namratha Bhandari¹and Santosh L. Gaonkar¹

Academic Editor: Giuseppe Gattuso

Received12 Jun 2014

Accepted29 Oct 2014

Published20 Nov 2014

Abstract

The paper describes a convenient method for the preparation of 4-substituted phenyl-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thiones. The structures of the synthesized compounds are established by the results of LCMS, ¹H NMR, ¹³C NMR, and IR and elemental analyses. The mercaptotriazoles are indicated to be in thione form by ¹H NMR spectra. All the synthesized compounds have been screened for antibacterial and antifungal activities. Compounds 12d and 12h exhibit encouraging results, while the remaining compounds show moderate activities. On the basis of spectral studies, formation of 2-amino-1,3,4-thiadiazoles from the isobenzofuran acyl thiosemicarbazides 11(a–h) is ruled out.

1. Introduction

The benzo [c] furan system, trivially called isobenzofuran, has come to light from 1960s. There are records for the reactivity of substituted isobenzofurans as dienes in the Diels-Alder reaction [1, 2]. Nevertheless, its application for building natural and synthetic products has seen a setback. This is by reason of dearth of flexible methods for its synthesis. Citalopram (Figure 1), a well-known compound, affects serotonin metabolism in the brain and thus acts as an antidepressant drug [3]. Citalopram is prescribed for treating major depression [4], social anxiety [5, 6], panic disorder [7–9], diabetic neuropathy [10], premature ejaculation [11, 12], and poststroke pathological crying [13, 14]. 1-(4-Fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile is an intermediate in the synthesis of citalopram [15, 16].

The biological properties of 1,2,4-triazoles are well documented [17]. The pharmacological profiles of 3-mercapto-1,2,4-triazoles are tested meticulously for their antimicrobial [18, 19], anticonvulsant [20], and antidepressant activities [21]. 1,2,4-Triazoles from 1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile is a venture to blend properties of two distinct heterocyclic entities.

An attempt to prepare 2-amino-5-substituted-1,3,4-thiadiazoles from substituted acyl thiosemicarbazides 11 has failed to furnish the corresponding products. The decomposition of the starting material is indicated by ¹H NMR and ¹³C NMR spectra. This reaction in acidic medium is dependent on both pH of the medium and substituents of acylthiosemicarbazides. The probable reason for the failure may be the steric hindrance posed by bulky isobenzofuran component for cyclization pathway.

This paper portrays the synthetic tactic for the preparation of 3-mercapto-1,2,4-triazole derivatives bearing isobenzofuran moiety and an assessment of their antimicrobial action.

2. Materials and Methods

2.1. Chemistry

The melting points are determined on Thomas Hoover apparatus and are uncorrected. The IR (KBr) spectra are recorded on Shimadzu 8300 Fourier transform infrared spectrometer. ¹H NMR is recorded on Bruker AM 400 MHz spectrometer and ¹³C NMR is recorded on Bruker AM 100 MHz spectrometer using DMSO as solvent and TMS as an internal standard (Chemical shift in ppm). Mass spectral (MS) analysis is carried out on Agilent 6520 ESIQTOF MS with Ionization source ESIQTOF and acetonitrile as solvent (110 Volts). Elemental analyses are obtained on a Vario-EL instrument. Thin layer chromatography is conducted on 0.25 mm silica gel plates (60F₂₅₄, Merck). Visualization is made with ultraviolet light. All extracted solvents are dried over Na₂SO₄ and evaporated with a BUCHI rotary evaporator. Reagents are obtained commercially and used as received.

2.1.1. Procedure for the Synthesis of 5-Amino-3H-isobenzofuran-1-one (3)

To a cooled solution of SnCl₂ (1.0 g, 5.27 mmol) in Conc. HCl (20 mL) add 4-nitrophthalimide 1 (5.0 g, 0.026 mol) slowly under stirring. After complete addition, the reaction mass is stirred for 3 h at r.t. The reaction mass is cooled and the solid formed is filtered and washed with chilled water. The wet solid 2 (4 g, 0.024 mol) is dissolved in 30% aq. NaOH solution (20 mL). Zn dust (2 g, 0.030 mol) is added to the mixture and refluxed for 4 h. The residue is filtered and the filtrate is acidified with Conc. HCl (20 mL). This mass is refluxed again for 2 h. Thereafter, the reaction mass is cooled and the pH is adjusted to neutral using liq. NH₃. The solid formed is filtered and recrystallised from boiling methanol to afford 5-amino-3H-isobenzofuran-1-one 3 as off white solid, yielding 3.0 g (83%), m.p. 186–188°C; IR (KBr pellet, cm⁻¹): ν 3133 (NH), 3085 (aromatic –CH), 1644 (C=O), 1620, 1471 (aromatic C=C), 1044 (COC), 1022 (CN); ¹H NMR (DMSO, 400 MHz): δ 7.55 (d, Hz, 1H, ArH), 6.62–6.69 (m, 2H, ArH), 5.32 (s, 2H, CH₂), 5.13 (bs, 2H, NH₂); ¹³C NMR (DMSO, 400 MHz): δ 169.0, 141.7, 137.6, 133.0, 131.9, 128.9, 124.4, 70.5; Anal. Calcd. for C₈H₇NO₂: C, 64.42; H, 4.73; N, 9.39. Found: C, 64.49; H, 4.69; N, 9.34.

2.1.2. Procedure for the Synthesis of 1-Oxo-1,3-dihydro-isobenzofuran-5-carbonitrile (4)

Dissolve 5-amino-3H-isobenzofuran-1-one 3 (2.00 g, 0.013 mol) in Conc. HCl (10 mL). Dilute with water (30 mL) and stir to make a homogeneous solution. Cool in ice and add NaNO₂ (1.10 g, 0.016 mol) solution in water (2.5 mL) under stirring. To this cool diazonium salt solution add CuCN (1.42 g, 0.015 mol) slowly in small quantities with warming on a water bath at 60°C. Reflux for 30 min and then cool the reaction mass to get the title compound 4 which is recrystallised from ethyl acetate, yielding 1.68 g (84%), m.p. 202–204°C; IR (KBr pellet, cm⁻¹): ν 3043 (aromatic –CH), 2251 (CN), 1685 (C=O), 1670, 1444 (C=C), 1037 (COC); ¹H NMR (DMSO, 400 MHz): δ 8.01 (d, Hz, 1H, ArH), 7.65 (d, Hz, 1H, ArH), 7.62 (s, 1H, ArH), 5.38 (s, 2H, CH₂); ¹³C NMR (DMSO, 400 MHz): δ 171.1, 140.6, 137.8, 132.5, 131.7, 128.4, 125.7, 119.6, 69.4; Anal. Calcd. for C₈H₄NO₂: C, 67.92; H, 3.17; N, 8.80. Found: C, 67.91; H, 3.19; N, 8.88.

2.1.3. Procedure for the Synthesis of 1-(4-Fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile (7)

Under nitrogen atmosphere p-fluoro phenyl magnesium bromide (7.5 g, 37.73 mmol) is added dropwise to a stirred solution of 1-oxo-1,3-dihydro-isobenzofuran-5-carbonitrile 4 (5 g, 31.44 mmol) in THF (50 mL) at 0–5°C. The mixture is stirred for 1 h at r.t. Add saturated NH₄Cl to facilitate decomposition of magnesium complex. Put in some more THF and wash with water. Remove off THF and pour residue 5 into methanol (10 mL). NaBH₄ (0.58 g, 15.72 mmol) is added slowly for 30 min to the reaction mass and stirred for 2 h at r.t. Solvents are removed to get diol 6 which is refluxed with 2N HCl (50 mL) for 2 h. The reaction mass is cooled and diluted with water. The product is extracted into methylene chloride, washed with water, and dried (anhy. Na₂SO₄). The solvent is removed and the residue is crystallized in IPA to provide 1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile 7 as pale yellow solid yielding 5.9 g (79%), m.p. 97-98°C; IR (KBr pellet, cm⁻¹): ν 3013(aromatic –CH), 2246 (CN), 1699, 1479 (C=C), 1038 (COC); ¹H NMR (DMSO, 400 MHz): δ 7.65 (s, 1H, ArH), 7.58 (d, Hz, 1H, ArH), 7.31 (dd, Hz, 2.6 Hz, 2H, ArH), 7.15 (d, Hz, 1H, ArH), 7.09 (t, Hz, 2H, ArH), 6.11 (s, 1H, CH), 5.29 (d, Hz, 1H, CH), 5.18 (d, Hz, 1H, CH); ¹³C NMR (DMSO, 400 MHz): δ 144.8, 140.5, 137.2, 133.3, 132.9, 131.3, 128.9, 128.4, 125.7, 119.6, 116.0, 84.2, 71.8; Anal. Calcd. for C₁₅H₁₀FNO: C, 81.08; H, 4.58; N, 6.36. Found: C, 81.10; H, 4.55; N, 6.39.

2.1.4. Procedure for the Synthesis of 1-(4-Fluorophenyl)-1,3-dihydroisobenzofuran-5-carboxylic Acid (8)

1-(4-Fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile 7 (5 g, 20.92 mmol) is added to methanol (50 mL) and 1N NaOH (20 mL). The mixture is refluxed for 3 hr. Completion of reaction is marked by TLC with mobile phase toluene : ethyl acetate = 7.5 : 2.5. After completion of reaction, the mass is cooled and acidified with 1N HCl. The solid formed is filtered, washed with water, and recrystalized from ethanol to give 8 as crystalline white solid with a yield of 4.7 g (87%), m.p. 188–190°C; IR (KBr pellet, cm⁻¹): ν 3012 (acid CH), 2912 (acid OH), 1707 (C=O), 1682, 1492 (C=C), 1039 (COC); ¹H NMR (DMSO, 400 MHz): δ 12.35 (bs, 1H, COOH), 7.80 (s, 1H, ArH), 7.72 (d, Hz, 1H, ArH), 7.26 (dd, Hz, 2.5 Hz, 2H, ArH), 7.13 (d, Hz, 1H, ArH), 7.01 (t, Hz, 2H, ArH), 6.14 (s, 1H, CH), 5.34 (d, Hz, 1H, CH), 5.21 (d, Hz, 1H, CH); ¹³C NMR (DMSO, 400 MHz): δ 178.2, 144.8, 140.8, 138.1, 133.2, 132.0, 131.7, 128.9, 127.9, 125.4, 115.6, 84.7, 71.2; Anal. Calcd. for C₁₅H₁₁FO₃: C, 69.76; H, 4.29. Found: C, 69.70; H, 4.24.

2.1.5. Procedure for the Synthesis of 1-(4-Fluorophenyl)-1,3-dihydroisobenzofuran-5-carbohydrazide (10)

1-(4-Fluorophenyl)-1,3-dihydroisobenzofuran-5-carboxylic acid 8 (5 g, 0.019 mol) is refluxed with ethanol (20 mL) and catalytic amount of Conc. H₂SO₄. The mixture is refluxed for 5 h. The progress of the reaction is monitored by TLC (toluene : ethyl acetate = 7.5 : 2.5). To stop the back reaction, excess of alcohol is evaporated off by rotavap. Residue is extracted with diethyl ether. Ether layer is washed with 5% sodium bicarbonate solution and thereafter evaporated to yield corresponding aromatic ester 9. Compound 9 (4 g, 0.013 mol) is directly refluxed with 98% hydrazine hydrate (4 mL) in ethanol (4 mL) for 3 h. The progress of the reaction is monitored by TLC (toluene : ethyl acetate : diethylamine = 7.5 : 2.5 : 1). Reaction mixture is cooled and the solid formed is filtered and washed with ethanol to get 1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbohydrazide 10 as white solid with a yield of 3.6 g (94%), m.p. 238–240°C; IR (KBr pellet, cm⁻¹): ν 3185 (NH), 1695 (C=O), 1658, 1477 (C=C), 1110 (hydrazine N–N), 1083 (COC); ¹H NMR (DMSO, 400 MHz): δ 11.91 (s, 1H, NH), 11.76 (s, 2H, NH₂), 8.48 (s, 1H, ArH), 7.93 (d, Hz, 1H, ArH), 7.74 (dd, Hz, 2.5 Hz, 2H, ArH), 7.42 (d, Hz, 1H, ArH), 7.21 (t, Hz, 2H, ArH), 6.27 (s, 1H, CH), 5.34 (d, Hz, 1H, CH), 5.21 (d, Hz, 1H, CH); ¹³C NMR (DMSO, 400 MHz): δ 161.0, 147.8, 139.7, 133.8, 129.5, 129.1, 127.5, 127.1, 122.6, 121.3, 125.0, 115.9, 84.5, 72.8; Anal. Calcd. for C₁₅H₁₃ FN₂O₂: C, 66.17; H, 4.81; N, 10.29. Found: C, 66.19; H, 4.77; N, 10.22.

2.1.6. Representative Procedure for the Synthesis of 1-(4-Fluorophenyl)-1,3-dihydroisobenzofuran-5-acyl Thiosemicarbazides 11(a–h)

Reflux an equimolar mixture of compound 10 and 4-substituted phenyl isothiocyanate (a–h) in methanol (10 vol.) for 3 h. After cooling, the resulting solid is filtered and recrystallized from methanol to afford pure acyl thiosemicarbazides 11(a–h).

2.1.7. Typical Procedure for the Synthesis of 4-Substituted Phenyl-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thiones 12(a–h)

Thiosemicarbazide 11(a–h) (1.0 mmol) is added portionwise to 5% NaOH solution (30 mL) and the reaction mixture is refluxed for 4 h. Cool and acidify with 6 N HCl to pH 2-3. The precipitated solid 12(a–h) is filtered, washed with water, and recrystallized from ethanol.

The same procedure is used in all the following cases.

(1) Synthesis of 4-Phenyl-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thione 12a. From 11a (0.50 g, 1.23 mmol) we synthesized a white solid 12a (0.436 g, 91%) with m.p. 208–210°C; IR (KBr pellet, cm⁻¹): ν 3402 (NH), 3085 (aromatic CH), 1604 (C=N), 1404 (C=C), 1234 (C=S), 1157 (COC), 1033 (CF); ¹H NMR (DMSO, 400 MHz): δ 14.14 (s, 1H, NH), 7.50 (s, 1H, ArH), 7.48 (d, Hz, 1H, ArH), 7.37 (dd, Hz, 2.6 Hz, 2H, ArH), 7.34 (t, Hz, 2H, ArH), 7.33 (d, Hz, 1H, ArH), 7.18–7.0 (m, 5H, ArH), 6.15 (s, 1H, CH), 5.23 (d, Hz, 1H, CH), 5.17 (d, Hz, 1H, CH); ¹³C NMR (DMSO, 400 MHz): δ 169.0, 150.9, 144.4, 139.7, 134.9, 129.9, 129.8, 129.1, 128.9, 128.8, 128.2, 125.8, 122.6, 121.9, 115.8, 115.6, 84.3, 72.7; EI-MS (110 V) m/z (%): 390 (M⁺, 100), 360 (6.7), 267 (28), 165 (2.5), 123 (4.3); Anal. Calcd. for C₂₂H₁₆ FN₃OS: C, 67.85; H, 4.14; N 10.79. Found: C, 67.82; H, 4.19; N 10.74.

(2) Synthesis of 4-Benzyl-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thione 12b. From 11b (0.50 g, 1.19 mmol) we synthesized a white solid 12b (0.432 g, 90%) with m.p. 194–196°C; IR (KBr pellet, cm⁻¹): ν 3448 (NH), 3085 (aromatic CH), 2923 (CH), 1654 (C=N), 1504 (C=C), 1280 (C=S), 1033 (CF); ¹H NMR (DMSO, 400 MHz): δ 14.11 (s, 1H, NH), 7.53 (s, 1H, ArH), 7.37 (d, Hz, 1H, ArH), 7.34 (dd, Hz, 2.5 Hz, 2H, ArH), 7.24 (t, Hz, 2H, ArH), 7.19 (d, Hz, 1H, ArH), 7.0–7.11 (m, 5H, ArH), 6.21 (s, 1H, CH), 5.28 (d, Hz, 1H, CH), 5.44 (d, Hz, 1H, CH), 2.5 (s, 2H, CH₂); ¹³C NMR (DMSO, 400 MHz): δ 168.5, 151.7, 144.8, 140.0, 138.8, 136.2, 129.9, 129.1, 129.0, 128.4, 127.9, 126.0, 123.0, 122.1, 115.9, 115.6, 85.4, 72.7, 47.1; Anal. Calcd. for C₂₃H₁₈ FN₃OS: C, 68.47; H, 4.50; N, 10.41. Found: C, 68.42; H, 4.57; N, 10.43.

(3) Synthesis of 4-(2-Phenylethyl)-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thione 12c. From 11c (0.50 g, 1.15 mmol) we synthesized a white solid 12c (0.413 g, 86%) with m.p. 212–214°C; IR (KBr pellet, cm⁻¹): ν 3271 (NH), 3155 (aromatic CH), 1666 (C=N), 1542 (C=C), 1234 (C=S), 1164 (COC), 1018 (CF); ¹H NMR (DMSO, 400 MHz): δ 14.13 (s, 1H, NH), 7.50 (s, 1H, ArH), 7.36 (d, Hz, 1H, ArH), 7.32 (dd, Hz, 2.5 Hz, 2H, ArH), 7.29 (t, Hz, 2H, ArH), 7.15 (d, Hz, 1H, ArH), 7.0–7.08 (m, 5H, ArH), 6.20 (s, 1H, CH), 5.24 (d, Hz, 1H, CH), 5.47 (d, Hz, 1H, CH), 3.6 (t, Hz, 2H, CH₂), 2.51 (t, Hz, 2H, CH₂); ¹³C NMR (DMSO, 400 MHz): δ 169.1, 150.6, 144.2, 140.6, 135.1, 129.5, 129.1, 128.8, 128.2, 127.9, 126.3, 125.4, 122.9, 121.1, 115.6, 115.1, 85.0, 72.7, 48.4, 33.2; Anal. Calcd. for C₂₄H₂₀ FN₃OS: C, 69.04; H, 4.83; N, 10.06. Found: C, 69.06; H, 4.88; N, 10.04.

(4) Synthesis of 4-(4-Chlorophenyl)-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thione 12d. From 11d (0.50 g, 1.13 mmol) we synthesized a white solid 12d (0.387 g, 79%) with m.p. 180–182°C; IR (KBr pellet, cm⁻¹): ν 3440 (NH), 3093 (aromatic CH), 1612 (C=N), 1488 (C=C), 1226 (C=S), 1103 (COC), 1033 (CF), 825 (CCl); ¹H NMR (DMSO, 400 MHz): δ 14.07 (s, 1H, NH), 7.92 (s, 1H, ArH), 7.88 (d, Hz, 1H, ArH), 7.70 (d, Hz, 2H, ArH), 7.64 (d, Hz, 2H, ArH), 7.45 (dd, Hz, 2.5 Hz, 2H, ArH), 7.31 (t, Hz, 2H, ArH), 7.25 (d, Hz, 1H, ArH), 6.21 (s, 1H, CH), 5.16 (d, Hz, 1H, CH), 5.10 (d, Hz, 1H, CH); ¹³C NMR (DMSO, 400 MHz): δ 169.0, 152.6, 147.5, 144.5, 139.8, 138.7, 134.5, 131.1, 129.8, 128.9, 128.8, 128.3, 125.7, 122.7, 115.8, 155.6, 84.3, 72.7; Anal. Calcd. for C₂₂H₁₅ ClFN₃OS: C, 62.34; H, 3.57; N, 9.91. Found: C, 69.32; H, 3.54; N, 9.96.

(5) Synthesis of 4-(4-Nitrophenyl)-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thione 12e. From 11e (0.50 g, 1.14 mmol) we synthesized a white solid 12e (0.416 g, 83%) with m.p. 174–176°C; IR (KBr pellet, cm⁻¹): ν 3224 (NH), 3091 (aromatic CH), 1612 (C=N), 1481 (C=C), 1315 (NO₂), 1244 (C=S), 1103 (COC); ¹H NMR (DMSO, 400 MHz): δ 14.19 (s, 1H, NH), 8.20 (d, Hz, 2H, ArH), 7.94 (s, 1H, ArH), 7.83 (d, Hz, 1H, ArH), 7.42 (d, Hz, 2H, ArH), 7.37 (dd, Hz, 2.5 Hz, 2H, ArH), 7.30 (t, Hz, 2H, ArH), 7.24 (d, Hz, 1H, ArH), 6.87 (s, 1H, CH), 5.21 (d, Hz, 1H, CH), 5.18 (d, Hz, 1H, CH); ¹³C NMR (DMSO, 400 MHz): δ 168.8, 153.6, 150.6, 143.8, 137.9, 134.5, 129.9, 129.5, 129.1, 128.6, 127.3, 125.8, 124.4, 122.5, 117.0, 115.2, 84.2, 72.1; Anal. Calcd. for C₂₂H₁₅ FN₄O₃S: C, 60.82; H, 3.48; N, 12.90. Found: C, 60.87; H, 3.43; N, 12.96.

(6) Synthesis of 4-(4-Methylphenyl)-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thione 12f. From 11f (0.50 g, 1.19 mmol) we synthesized a white solid 12f (0.422 g, 88%) with m.p. 152–154°C; IR (KBr pellet, cm⁻¹): ν 3162 (NH), 3044 (aromatic CH), 2948 (CH), 1612 (C=N), 1472 (C=C), 1226 (C=S), 1146 (COC), 1012 (CF); ¹H NMR (DMSO, 400 MHz): δ 14.07 (s, 1H, NH), 7.92 (s, 1H, ArH), 7.88 (d, Hz, 1H, ArH), 7.64 (d, Hz, 2H, ArH), 7.58 (d, Hz, 2H, ArH), 7.40 (dd, Hz, 2.6 Hz, 2H, ArH), 7.33 (t, Hz, 2H, ArH), 7.26 (d, Hz, 1H, ArH), 6.12 (s, 1H, CH), 5.20 (d, Hz, 1H, CH), 5.17 (d, Hz, 1H, CH), 2.33 (s, 3H, CH₃); ¹³C NMR (DMSO, 400 MHz): δ 169.0, 150.5, 144.7, 143.6, 133.0, 130.3, 129.8, 129.7, 129.1, 128.9, 128.3, 126.8, 125.7, 122.6, 119.5, 115.8, 83.7, 72.5, 21.4; Anal. Calcd. for C₂₃H₁₈ FN₃OS: C, 68.47; H, 4.50; N, 10.41. Found: C, 68.42; H, 4.56; N, 10.47.

(7) Synthesis of 4-(4-Methoxyphenyl)-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thione 12g. From 11g (0.50 g, 1.14 mmol) we synthesized a white solid 12g (0.403 g, 84%) with m.p. 174–176°C; IR (KBr pellet, cm⁻¹): ν 3210 (NH), 3093 (aromatic CH), 1646 (C=N), 1428 (C=C), 1305 (CO), 1278 (C=S), 1140 (COC), 1005 (CF); ¹H NMR (DMSO, 400 MHz): δ 14.10 (s, 1H, NH), 7.99 (s, 1H, ArH), 7.85 (d, Hz, 1H, ArH), 7.44 (dd, Hz, 2.6 Hz, 2H, ArH), 7.32 (t, Hz, 2H, ArH), 7.24 (d, Hz, 1H, ArH), 7.11 (d, Hz, 2H, ArH), 6.79 (d, Hz, 2H, ArH), 6.44 (s, 1H, CH), 5.29 (d, Hz, 1H, CH), 5.01 (d, Hz, 1H, CH), 3.11 (s, 3H, OCH₃); ¹³C NMR (DMSO, 400 MHz): δ 168.4, 150.4, 150.1, 144.7, 140.0, 134.1, 131.1, 129.5, 129.1, 128.9, 128.2, 124.3, 122.0, 117.1, 117.4, 115.4, 84.1, 72.8, 53.6; Anal. Calcd. for C₂₃H₁₈ FN₃O₂S: C, 65.86; H, 4.33; N, 10.02. Found: C, 65.82; H, 4.39; N, 10.07.

(8) Synthesis of 4-(4-Bromophenyl)-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thione 12h. From 11h (0.50 g, 1.05 mmol) we synthesized a white solid 12h (0.398 g, 81%) with m.p. 206–208°C; IR (KBr pellet, cm⁻¹): ν 3241 (NH), 3077 (aromatic CH), 1672 (C=N), 1488 (C=C), 1237 (C=S), 1142 (COC), 1075 (CF), 524 (CBr); ¹H NMR (DMSO, 400 MHz): δ 14.03 (s, 1H, NH), 7.90 (s, 1H, ArH), 7.85 (d, Hz, 1H, ArH), 7.66 (d, Hz, 2H, ArH), 7.52 (d, Hz, 2H, ArH), 7.44 (dd, Hz, 2.5 Hz, 2H, ArH), 7.32 (t, Hz, 2H, ArH), 7.24 (d, Hz, 1H, ArH), 6.19 (s, 1H, CH), 5.18 (d, Hz, 1H, CH), 5.12 (d, Hz, 1H, CH); ¹³C NMR (DMSO, 400 MHz): δ 168.1, 150.6, 146.2, 145.1, 134.6, 133.2, 129.9, 129.5, 129.0, 128.8, 127.1, 125.7, 122.4, 118.4, 115.2, 113.6, 84.3, 72.6; Anal. Calcd. for C₂₂H₁₅ Br FN₃OS: C, 56.42; H, 3.23; N, 8.97. Found: C, 56.44; H, 3.26; N, 8.91.

2.2. Biology

As per NCCLS document M62-A7 Protocols, the preliminary antimicrobial activity is performed using the disc diffusion method [22]. Four bacterial and four fungal strains are chosen for the study. They are Bacillus subtilis (NCIM 2063), Staphylococcus aureus (NCIM 2079), Escherichia coli (NCIM 2574), Pseudomonas aeruginosa (NCIM 2036), Candida albicans (NCIM 3471), Saccharomyces cerevisiae (NCIM 3559), Aspergillus flavus (NCIM 1316), and Aspergillus niger (NCIM 545). The bacterial strains are maintained on Muller-Hinton (MH) agar medium and fungi are sustained on Sabouraud Dextrose (SD) agar medium.

The bacterial inoculum is prepared by suspending in 9 mL of sterile water for colonies from 24 h culture on MH agar medium. For the fungi, the inoculum is prepared with spores derived from 48 h–96 h culture on SD agar medium.

To standardize the inoculum density for a susceptibility test, a BaSO₄ turbidity standard, equivalent to a 0.5 McFarland is used. The turbidity of the actively growing microbial culture is adjusted with sterile saline to attain turbidity optically comparable to that of the 0.5 McFarland standards. Within 15 minutes after adjusting the turbidity of the inoculum suspension, the petri plates are inoculated with a standardized suspension of the tested microorganisms. The predetermined series of antimicrobial discs is allotted onto the surface of the inoculated agar plate. Whatman filter paper number 1 is used to prepare discs approximately 6 mm in diameter, which are sterilized in a hot air oven before placing in petri plates. These paper discs are placed in a circular pattern in each inoculated plate and then injected with the specific amount of tested compound using micropipettes.

All the newly synthesized mercaptotriazoles are dissolved in dimethyl sulfoxide (DMSO) to prepare chemicals of stock solution of 10 mg/1 mL for antibacterial study and 25 mg/1 mL for antifungal study. Gentamicin and fluconazole are used as standard antibacterial and antifungal drugs, respectively. Dimethyl sulfoxide is used as solvent control. The plates are incubated and the inhibitory activity is measured (in mm) as the diameter of the observed inhibition zones. The tests are repeated to confirm the findings and the average of the readings is taken into account. The results of study are tabulated in Tables 1 and 2.

Following M62-A7 Protocols, broth dilution test by doubling dilution of the antibiotics is carried out to examine the minimum inhibitory concentration of the most promising compound 12d against the tested microbes. The antibacterial and antifungal assays are performed in Mueller-Hinton broth and Sabouraud Dextrose broth, respectively. MIC for microbes is to be observed between 250 μg/1 mL and 7.81 μg/1 mL. Gentamicin (1 mg/2 mL) and fluconazole (1 mg/2 mL) are used as standard antibacterial and antifungal drugs, respectively. DMSO is the solvent control.

3. Results and Discussion

4-Nitrophthalimide 1 is reduced to 4-aminophthalimide 2 using SnCl₂/HCl which is converted to 5-amino-3H-isobenzofuran-1-one 3 by employing Zn/NaOH. Compound 3 is altered to 1-oxo-1,3-dihydro-isobenzofuran-5-carbonitrile 4 by Sandmeyer reaction. Compound 4, commonly called 5-cyanophthalide, is subjected to Grignard reaction with 4-fluorophenyl magnesium bromide in tetrahydrofuran and the resulting product is treated with sodium borohydride to obtain the diol 6, which is cyclized with 2N HCl to afford 1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile 7. Compound 7 is hydrolysed in aq. methanolic NaOH to provide 1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carboxylic acid 8 in good yield. This acid is esterified and the ester 9 is converted to 1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbohydrazide 10. The synthesized acid hydrazide is treated with different substituted phenyl isothiocyanates (a–h) to yield 1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-acyl thiosemicarbazides 11(a–h). Cyclodehydration of the thiosemicarbazides 11(a–h) in basic medium (5% NaOH) leads to the formation of 4-substituted phenyl-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thiones 12(a–h) (Scheme 1).

Purity of the compounds is analyzed by TLC, LCMS, and elemental analyses. ¹H NMR, ¹³C NMR, and IR spectra have backed up the characterization. The IR spectra of the mercaptotriazoles 12(a–h) mark the absence of carbonyl absorption around 1750 cm⁻¹. The existence of triazoles in thione form is indicated by the absence of SH stretching in the characteristic region of 2540 cm⁻¹. The ¹H NMR spectrum of every compound unveils the deshielding of NH of the triazole ring as anticipated in the range δ 14.00–14.50. The signal for NH appearing downfield than δ 12.0 authenticates the existence of the ring in thione form. The characteristic fluorocoupling is observed for the aromatic protons of the phenyl ring attached to the 1st position of isobenzofuran moiety. In the ¹³C NMR spectra of triazol-3-thiones, values close to δ 168 and δ 150 are the characteristic signals for C-3 and C-5 carbons, respectively. Disappearance of signal around δ 161–163 for carbonyl carbons indicates the formation of target compounds 12(a–h). The molecular ion peak in the mass spectrum of C₂₂H₁₆FN₃OS (12a) is found to be at m/z 390.09. This is in agreement with its calculated formula weight 389.44. This confirms the formation of the product. The base peak is observed at m/z 267.07 for C₁₅H₁₁N₃S fragment.

Many research articles on heterocycles have explicated the synthesis of 2-amino-5-substituted-1,3,4-thiadiazole derivatives from substituted acyl thiosemicarbazides. This reaction runs parallel to the preparation of 3-mercapto-1,2,4-triazoles from the same starting material. Here, we have followed the classical methods of cyclization with cold concentrated H₂SO₄. Moreover, the use of novel reagents like saccharin and p-toluene sulfonic acid has also failed to afford the required products. The spectra have disclosed the decomposition of substituted thiosemicarbazides. Therefore, this plan of synthesis is discontinued. Similarly, spectral characterization reveals that 2-substituted acyl thiosemicarbazides have failed to form the required mercaptotriazoles. Greater steric hindrance of the bulky isobenzofuran substituents may be the rationalization for both failures.

Disc diffusion method is followed to observe the antimicrobial action. The results of the preliminary testing of the antimicrobial activity of the novel compounds are tabulated in Tables 1 and 2. Varying grades of inhibition against the growth of the tested microbes by the synthesized compounds can be noticed. Broadly, the inhibitory activity against the Gram-positive bacteria is higher than against the Gram-negative bacteria. Compound 12d shows significant inhibition against all the tested microorganisms owing to the presence of chloro group on the benzene ring attached to the 4th position of triazole ring. The better activity of 12e, 12g, and 12h can be attributed to the presence of nitro, methoxy, and bromo groups, respectively, at para positions of benzene ring. Compound 12a, which has unsubstituted benzene at 4th position of triazole ring, also shows better activity than the triazoles with benzyl and phenylethyl groups. The fluoro substituent attached to the para position of benzene ring, which is connected to the 1st position of the isobenzofuran core, appears to be the reason behind the antimicrobial activities displayed by the target compounds. Minimum inhibitory concentration (MIC) is inspected for 12d by broth dilution approach. For Gram-positive bacteria, the values are less than 62.5, but for Gram-negative bacteria the results are 125 ≤ MIC > 62.5. For all the fungal strains, the values are less than 62.5.

4. Conclusion

The present work is a multistep synthesis of a novel series of 4-substituted phenyl-5-[1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-yl]-2H-1,2,4-triazole-3-thiones. Structural confirmation is done with analytical techniques and antimicrobial action is performed by disc diffusion method. Based on structural activity relationship study, compounds 12a, 12d, 12e, 12g, and 12h have shown good inhibition against microbes.

Conflict of Interests

The authors declare that they have no conflict of interests.

Acknowledgments

The laboratory facilities from Manipal Institute of Technology (MIT), Manipal, and Manipal College of Pharmaceutical Sciences (MCOPS), Manipal, have been gratefully acknowledged.

References

B. Keayh, E. Plaumandna, A. Yanandraj, and D. R. Drigo, “Hydroxyacetals, phthalans and isobenzofurans therefrom,” Canadian Journal of Chemistry, vol. 61, pp. 1987–1995, 1983.
View at: Google Scholar
A. K. Ahmad and A. J. Al-Hamdany, “Synthesis of epoxy derivatives via Diels-Alder reaction,” Iraqi National Journal Chemistry, vol. 30, pp. 350–356, 2008.
View at: Google Scholar
R. J. Milne and K. L. Goa, “Citalopram,” Drugs, vol. 41, pp. 450–477, 1991.
View at: Google Scholar
M. H. Trivedi, A. J. Rush, S. R. Wisniewski et al., “Evaluation of outcomes with citalopram for depression using measurement-based care in STAR^*D: implications for clinical practice,” The American Journal of Psychiatry, vol. 163, no. 1, pp. 28–40, 2006.
View at: Publisher Site | Google Scholar
T. Furmark, M. Tillfors, I. Marteinsdottir et al., “Common changes in cerebral blood flow in patients with social phobia treated with citalopram or cognitive-behavioral therapy,” Archives of General Psychiatry, vol. 59, no. 5, pp. 425–433, 2002.
View at: Publisher Site | Google Scholar
C. Bouwer and D. J. Stein, “Use of the selective serotonin reuptake inhibitor citalopram in the treatment of generalized social phobia,” Journal of Affective Disorders, vol. 49, no. 1, pp. 79–82, 1998.
View at: Publisher Site | Google Scholar
G. Perna, A. Bertani, D. Caldirola, E. Smeraldi, and L. Bellodi, “A comparison of citalopram and paroxetine in the treatment of panic disorder: a randomized, single-blind study,” Pharmacopsychiatry, vol. 34, no. 3, pp. 85–90, 2001.
View at: Publisher Site | Google Scholar
J. L. Baumgartner, G. J. Emslie, and M. L. Crismon, “Citalopram in children and adolescents with depression or anxiety,” Annals of Pharmacotherapy, vol. 36, no. 11, pp. 1692–1697, 2002.
View at: Publisher Site | Google Scholar
U. Lepola, E. Leinonen, and H. Koponen, “Citalopram in the treatment of early-onset panic disorder and school phobia,” Pharmacopsychiatry, vol. 29, no. 1, pp. 30–32, 1996.
View at: Publisher Site | Google Scholar
S. H. Sindrup, U. Bjerre, A. Dejgaard, K. Brøsen, T. Aaes-Jørgensen, and L. F. Gram, “The selective serotonin reuptake inhibitor citalopram relieves the symptoms of diabetic neuropathy,” Clinical Pharmacology & Therapeutics, vol. 52, no. 5, pp. 547–552, 1992.
View at: Publisher Site | Google Scholar
M. Atmaca, M. Kuloglu, E. Tezcan, and A. Semercioz, “The efficacy of citalopram in the treatment of premature ejaculation: a placebo-controlled study,” International Journal of Impotence Research, vol. 14, no. 6, pp. 502–505, 2002.
View at: Publisher Site | Google Scholar
M. Atmaca, M. Kuloglu, E. Tezcan, B. Ustundag, and A. Semercioz, “Serum leptin levels in patients with premature ejaculation before and after citalopram treatment,” BJU International, vol. 91, no. 3, pp. 252–254, 2003.
View at: Publisher Site | Google Scholar
G. Andersen, K. Vestergaard, and J. O. Riis, “Citalopram for post-stroke pathological crying,” The Lancet, vol. 342, no. 8875, pp. 837–839, 1993.
View at: Publisher Site | Google Scholar
L. Rampello, S. Chiechio, G. Nicoletti et al., “Prediction of the response to citalopram and reboxetine in post-stroke depressed patients,” Psychopharmacology, vol. 173, no. 1-2, pp. 73–78, 2004.
View at: Publisher Site | Google Scholar
A. Gravem, K. F. Amthor, C. Astrup et al., “A double-blind comparison of citalopram (Lu 10-171) and amitriptyline in depressed patients,” Acta Psychiatrica Scandinavica, vol. 75, no. 5, pp. 478–486, 1987.
View at: Publisher Site | Google Scholar
J. Hyttel, “Citalopram—pharmacological profile of a specific serotonin uptake inhibitor with antidepressant activity,” Progress in Neuro-Psychopharmacology and Biological Psychiatry, vol. 6, no. 3, pp. 277–295, 1982.
View at: Publisher Site | Google Scholar
B. Namratha and S. L. Gaonkar, “1,2,4-Triazoles: synthetic strategies and pharmacological profiles,” International Journal of Pharmacy and Pharmaceutical Sciences, vol. 8, pp. 73–80, 2014.
View at: Google Scholar
N. Ulusoy, A. Gürsoy, and G. Otuk, “Synthesis and antimicrobial activity of some 1,2,4-triazole-3-mercaptoacetic acid derivatives,” Il Farmaco, vol. 56, no. 12, pp. 947–952, 2001.
View at: Publisher Site | Google Scholar
Z. A. Kaplancikli, G. Turan-Zitouni, A. Özdemir, and G. Revial, “New triazole and triazolothiadiazine derivatives as possible antimicrobial agents,” European Journal of Medicinal Chemistry, vol. 43, no. 1, pp. 155–159, 2008.
View at: Publisher Site | Google Scholar
N. Siddiqui and W. Ahsan, “Triazole incorporated thiazoles as a new class of anticonvulsants: design, synthesis and in vivo screening,” European Journal of Medicinal Chemistry, vol. 45, no. 4, pp. 1536–1543, 2010.
View at: Publisher Site | Google Scholar
Z. A. Kaplanckl, A. Özdemir, G. Turan-Zitouni, M. D. Altntop, and Ö. D. Can, “New pyrazoline derivatives and their antidepressant activity,” European Journal of Medicinal Chemistry, vol. 45, no. 9, pp. 4383–4387, 2010.
View at: Publisher Site | Google Scholar
S. L. Gaonkar, K. M. L. Rai, and B. Prabhuswamy, “Synthesis and antimicrobial studies of a new series of 2-{4-[2-(5-ethylpyridin-2-yl)ethoxy]phenyl}-5-substituted-1,3,4-oxadiazoles,” European Journal of Medicinal Chemistry, vol. 41, no. 7, pp. 841–846, 2006.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2014 Namratha Bhandari and Santosh L. Gaonkar. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

1017

Downloads

333

Citations