Table of Contents
International Scholarly Research Notices
Volume 2014, Article ID 905828, 10 pages
http://dx.doi.org/10.1155/2014/905828
Research Article

Multiresponse Optimization of Process Parameters in Turning of GFRP Using TOPSIS Method

School of Mechanical Engineering, KIIT University, Bhubaneswar, India

Received 30 April 2014; Accepted 15 July 2014; Published 30 October 2014

Academic Editor: Wilma Polini

Copyright © 2014 Arun Kumar Parida and Bharat Chandra Routara. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. A. Hussain, V. Pandurangadu, and K. Palanikumar, “Surface roughness analysis in machining of GFRP composites by carbide tool (K20),” European Journal of Scientific Research, vol. 41, no. 1, pp. 84–98, 2010. View at Google Scholar · View at Scopus
  2. K. Palanikumar, “Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling,” International Journal of Advanced Manufacturing Technology, vol. 36, no. 1-2, pp. 19–27, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. J. P. Davim, P. Reis, V. Lapa, and C. C. António, “Machinability study on polyetheretherketone (PEEK) unreinforced and reinforced (GF30) for applications in structural components,” Composite Structures, vol. 62, no. 1, pp. 67–73, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Ramulu, D. Arola, and K. Colligan, “Preliminary investigation on the surface integrity of fibre reinforced plastics,” Engineering Systems Design and Analysis, vol. 64, no. 2, pp. 93–101, 1994. View at Google Scholar
  5. H. Takeyama and N. Iijima, “Machinability of glass fibre reinforced plastics and application of ultrasonic machining,” CIRP Annals, vol. 37, no. 1, pp. 93–96, 1988. View at Publisher · View at Google Scholar · View at Scopus
  6. X. M. Wang and L. C. Zhang, “An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics,” International Journal of Machine Tools and Manufacture, vol. 43, no. 10, pp. 1015–1022, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. J. P. Davim and F. Mata, “A new machinability index in turning fiber reinforced plastics,” Journal of Materials Processing Technology, vol. 170, no. 1-2, pp. 436–440, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. J. P. Davim and F. Mata, “Optimisation of surface roughness on turning fibre-reinforced plastics (FRPs) with diamond cutting tools,” International Journal of Advanced Manufacturing Technology, vol. 26, no. 4, pp. 319–323, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. K. Palanikumar, L. Karunamoorthy, and R. Karthikeyan, “Multiple performance optimization of machining parameters on the machining of GFRP composites using carbide (K10) tool,” Materials and Manufacturing Processes, vol. 21, no. 8, pp. 846–852, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. K. P. Yoon and C. L. Hwang, Multiple Attribute Decision Making, Sage, Beverly Hills, Calif, USA, 1995.
  11. D. Kanagarajan, R. Karthikeyan, K. Palanikumar, and J. P. Davim, “Optimization of electrical discharge machining characteristics of WC/Co composites using non-dominated sorting genetic algorithm (NSGA-II),” International Journal of Advanced Manufacturing Technology, vol. 36, no. 11-12, pp. 1124–1132, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Işık and A. Kentli, “Multicriteria optimization of cutting parameters in turning of UD-GFRP materials considering sensitivity,” International Journal of Advanced Manufacturing Technology, vol. 44, no. 11-12, pp. 1144–1153, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. K. Palanikumar, L. Karunamoorthy, and R. Karthikeyan, “Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites,” Materials and Design, vol. 27, no. 10, pp. 862–871, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. C. L. Lin, “Use of the Taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics,” Materials and Manufacturing Processes, vol. 19, no. 2, pp. 209–220, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Gupta and S. Kumar, “Multi-objective optimization of cutting parameters in turning using grey relational analysis,” International Journal of Industrial Engineering Computations, vol. 4, no. 4, pp. 547–558, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. B. B. Nayak and S. S. Mahapatra, “Multi-response optimization of WEDM process parameters using the AHP and TOPSIS method,” International Journal on Theoretical and Applied Research in Mechanical Engineering, vol. 2, no. 3, pp. 109–215, 2013. View at Google Scholar
  17. V. S. Gadakh, “Parametric optimization of wire electric discharge machining using TOPSIS method,” Advances in Production Engineering and Management, vol. 7, no. 3, pp. 157–164, 2012. View at Google Scholar
  18. M. Nalbant, H. Gökkaya, and G. Sur, “Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning,” Materials and Design, vol. 28, no. 4, pp. 1379–1385, 2007. View at Publisher · View at Google Scholar · View at Scopus