Table of Contents Author Guidelines Submit a Manuscript
Journal of Applied Mathematics
Volume 2007 (2007), Article ID 51905, 12 pages
http://dx.doi.org/10.1155/2007/51905
Research Article

Chip Thickness and Microhardness Prediction Models during Turning of Medium Carbon Steel

1Department of Mechanical & Industrial Engineering, Applied Science University, P.O. Box 926296, Shafa-Badran, Amman 11931, Jordan
2P.O. Box 830342, Amman 11183, Jordan

Received 1 March 2007; Accepted 11 July 2007

Academic Editor: Ibrahim Sadek

Copyright © 2007 S. A. Alrabii and L. Y. Zumot. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. C. Montgomery, Design and Analysis of Experiments, John Wiley & Sons, New York, NY, USA, 5th edition, 2001.
  2. V. K. Jain and B. K. Gupta, “Effects of accelerated tests on shear flow stress in machining,” Journal of Engineering for Industry, vol. 109, no. 3, pp. 206–212, 1987.
  3. S. M. Wu, “Tool life testing by response surface methodology—part I and part II,” Journal of Engineering for Industry, vol. 86, pp. 105–116, 1964.
  4. I. A. Choudhury and M. A. El-Baradie, “Tool-life prediction model by design of experiments for turning high strength steel (290 BHN),” Journal of Materials Processing Technology, vol. 77, no. 1–3, pp. 319–326, 1998. View at Publisher · View at Google Scholar
  5. S. K. Choudhury and I. V. K. Appa Rao, “Optimization of cutting parameters for maximizing tool life,” International Journal of Machine Tools and Manufacture, vol. 39, no. 2, pp. 343–353, 1999. View at Publisher · View at Google Scholar
  6. R. M. Sundaram and B. K. Lambert, “Mathematical models to predict surface finish in fine turning of steel—part I,” International Journal of Production Research, vol. 19, no. 5, pp. 547–556, 1981. View at Publisher · View at Google Scholar
  7. R. M. Sundaram and B. K. Lambert, “Mathematical models to predict surface finish in fine turning of steel—part II,” International Journal of Production Research, vol. 19, no. 5, pp. 557–564, 1981. View at Publisher · View at Google Scholar
  8. G. C. Onwubolu, “A note on “surface roughness prediction model in machining of carbon steel by PVD coated cutting tools”,” American Journal of Applied Sciences, vol. 2, no. 6, pp. 1109–1112, 2005.
  9. I. A. Choudhury and M. A. El-Baradie, “Surface roughness prediction in the turning of high-strength steel by factorial design of experiments,” Journal of Materials Processing Technology, vol. 67, no. 1–3, pp. 55–61, 1997. View at Publisher · View at Google Scholar
  10. C. X. Feng, “An experimental study of the impact of turning parameters on surface roughness,” in Proceedings of the Industrial Engineering Research Conference, Dallas, Tex, USA, May 2001, paper no. 2036.
  11. J. P. Davim, “A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments,” Journal of Materials Processing Technology, vol. 116, no. 2-3, pp. 305–308, 2001. View at Publisher · View at Google Scholar
  12. M. Y. Noordin, V. C. Venkatesh, S. Sharif, S. Elting, and A. Abdullah, “Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel,” Journal of Materials Processing Technology, vol. 145, no. 1, pp. 46–58, 2004. View at Publisher · View at Google Scholar
  13. V. K. Jain, S. Kumar, and G. K. Lal, “Effects of machining parameters on the micro-hardness of chips,” Journal of Engineering for Industry, vol. 111, no. 3, pp. 220–228, 1989.
  14. B. H. Amstead, P. F. Ostwald, and M. L. Begeman, Manufacturing Processes, John Wiley & Sons, New York, NY, USA, 1987.
  15. S. Kalpakjian, Manufacturing Processes for Engineering Materials, Addison-Wesley, Menlo Park, Calif, USA, 3rd edition, 1997.