Table of Contents Author Guidelines Submit a Manuscript
Journal of Applied Mathematics
Volume 2014, Article ID 439091, 15 pages
http://dx.doi.org/10.1155/2014/439091
Research Article

Modelling Laser Milling of Microcavities for the Manufacturing of DES with Ensembles

1Department of Civil Engineering, Higher Polytechnic School, University of Burgos, Cantabria Avenue, 09006 Burgos, Spain
2Department of Mechanical Engineering and Industrial Construction, University of Girona, Maria Aurelia Capmany 61, 17003 Girona, Spain

Received 28 December 2013; Accepted 11 March 2014; Published 17 April 2014

Academic Editor: Aderemi Oluyinka Adewumi

Copyright © 2014 Pedro Santos et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Sugioka, M. Meunier, and A. Piqué, Laser Precision Microfabrication, vol. 135, Springer, 2010.
  2. S. Garg and P. W. Serruys, “Coronary stents: current status,” Journal of the American College of Cardiology, vol. 56, no. 10, pp. S1–S42, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. D. M. Martin and F. J. Boyle, “Drug-eluting stents for coronary artery disease: a review,” Medical Engineering and Physics, vol. 33, no. 2, pp. 148–163, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Campanelli, G. Casalino, and N. Contuzzi, “Multi-objective optimization of laser milling of 5754 aluminum alloy,” Optics & Laser Technology, vol. 52, pp. 48–56, 2013. View at Google Scholar
  5. J. Ciurana, G. Arias, and T. Ozel, “Neural network modeling and particle swarm optimization (PSO) of process parameters in pulsed laser micromachining of hardened AISI H13 steel,” Materials and Manufacturing Processes, vol. 24, no. 3, pp. 358–368, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Cheng, W. Perrie, S. P. Edwardson, E. Fearon, G. Dearden, and K. G. Watkins, “Effects of laser operating parameters on metals micromachining with ultrafast lasers,” Applied Surface Science, vol. 256, no. 5, pp. 1514–1520, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. I. E. Saklakoglu and S. Kasman, “Investigation of micro-milling process parameters for surface roughness and milling depth,” The International Journal of Advanced Manufacturing Technology, vol. 54, no. 5–8, pp. 567–578, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. D. Ashkenasi, T. Kaszemeikat, N. Mueller, R. Dietrich, H. J. Eichler, and G. Illing, “Laser trepanning for industrial applications,” Physics Procedia, vol. 12, pp. 323–331, 2011. View at Publisher · View at Google Scholar
  9. B. S. Yilbas, S. S. Akhtar, and C. Karatas, “Laser trepanning of a small diameter hole in titanium alloy: temperature and stress fields,” Journal of Materials Processing Technology, vol. 211, no. 7, pp. 1296–1304, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. R. Biswas, A. S. Kuar, S. Sarkar, and S. Mitra, “A parametric study of pulsed Nd:YAG laser micro-drilling of gamma-titanium aluminide,” Optics & Laser Technology, vol. 42, no. 1, pp. 23–31, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. L. Tricarico, D. Sorgente, and L. D. Scintilla, “Experimental investigation on fiber laser cutting of Ti6Al4V thin sheet,” Advanced Materials Research, vol. 264-265, pp. 1281–1286, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. N. Muhammad, D. Whitehead, A. Boor, W. Oppenlander, Z. Liu, and L. Li, “Picosecond laser micromachining of nitinol and platinum-iridium alloy for coronary stent applications,” Applied Physics A: Materials Science and Processing, vol. 106, no. 3, pp. 607–617, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Meng, J. Liao, Y. Zhou, and Q. Zhang, “Laser micro-processing of cardiovascular stent with fiber laser cutting system,” Optics & Laser Technology, vol. 41, no. 3, pp. 300–302, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. T.-C. Chen and R. B. Darling, “Laser micromachining of the materials using in microfluidics by high precision pulsed near and mid-ultraviolet Nd:YAG lasers,” Journal of Materials Processing Technology, vol. 198, no. 1–3, pp. 248–253, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. D. Bruneel, G. Matras, R. le Harzic, N. Huot, K. König, and E. Audouard, “Micromachining of metals with ultra-short Ti-Sapphire lasers: prediction and optimization of the processing time,” Optics and Lasers in Engineering, vol. 48, no. 3, pp. 268–271, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Pfeiffer, A. Engel, S. Weißmantel, S. Scholze, and G. Reisse, “Microstructuring of steel and hard metal using femtosecond laser pulses,” Physics Procedia, vol. 12, pp. 60–66, 2011. View at Publisher · View at Google Scholar
  17. D. Karnakis, M. Knowles, P. Petkov, T. Dobrev, and S. Dimov, “Surface integrity optimisation in ps-laser milling of advanced engineering materials,” in Proceedings of the 4th International WLT-Conference on Lasers in Manufacturing, Munich, Germany, 2007.
  18. H. Qi and H. Lai, “Micromachining of metals and thermal barrier coatings using a 532 nm nanosecond ber laser,” Physics Procedia, vol. 39, pp. 603–612, 2012. View at Publisher · View at Google Scholar
  19. D. Teixidor, I. Ferrer, J. Ciurana, and T. Özel, “Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel,” Robotics and Computer-Integrated Manufacturing, vol. 29, no. 1, pp. 209–219, 2013. View at Publisher · View at Google Scholar
  20. I. Witten and E. Frank, Data Mining: Practical Machine Learning Tools and Techniques, Morgan Kaufmann, 2nd edition, 2005.
  21. J. Han, M. Kamber, and J. Pei, Data Mining: Concepts and Techniques, Morgan Kaufmann, 2006.
  22. A. J. Torabi, M. J. Er, L. Xiang et al., “A survey on artificial intelligence technologies in modeling of high speed end-milling processes,” in Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM '09), pp. 320–325, Singapore, July 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Chandrasekaran, M. Muralidhar, C. M. Krishna, and U. S. Dixit, “Application of soft computing techniques in machining performance prediction and optimization: a literature review,” The International Journal of Advanced Manufacturing Technology, vol. 46, no. 5–8, pp. 445–464, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. A. K. Choudhary, J. A. Harding, and M. K. Tiwari, “Data mining in manufacturing: a review based on the kind of knowledge,” Journal of Intelligent Manufacturing, vol. 20, no. 5, pp. 501–521, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. A. K. Dubey and V. Yadava, “Laser beam machining—a review,” International Journal of Machine Tools and Manufacture, vol. 48, no. 6, pp. 609–628, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. B. F. Yousef, G. K. Knopf, E. V. Bordatchev, and S. K. Nikumb, “Neural network modeling and analysis of the material removal process during laser machining,” The International Journal of Advanced Manufacturing Technology, vol. 22, no. 1-2, pp. 41–53, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. S. Campanelli, G. Casalino, A. Ludovico, and C. Bonserio, “An artificial neural network approach for the control of the laser milling process,” The International Journal of Advanced Manufacturing Technology, vol. 66, no. 9–12, pp. 1777–1784, 2012. View at Publisher · View at Google Scholar
  28. C. Jimin, Y. Jianhua, Z. Shuai, Z. Tiechuan, and G. Dixin, “Parameter optimization of non-vertical laser cutting,” The International Journal of Advanced Manufacturing Technology, vol. 33, no. 5-6, pp. 469–473, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. D. Teixidor, M. Grzenda, A. Bustillo, and J. Ciurana, “Modeling pulsed laser micromachining of micro geometries using machine-learning techniques,” Journal of Intelligent Manufacturing, 2013. View at Publisher · View at Google Scholar
  30. N. C. Oza and K. Tumer, “Classifier ensembles: select real-world applications,” Information Fusion, vol. 9, no. 1, pp. 4–20, 2008. View at Publisher · View at Google Scholar · View at Scopus
  31. P. Santos, L. Villa, A. Reñones, A. Bustillo, and J. Maudes, “Wind turbines fault diagnosis using ensemble classifiers,” in Advances in Data Mining. Applications and Theoretical Aspects, vol. 7377, pp. 67–76, Springer, Berlin, Germany, 2012. View at Publisher · View at Google Scholar
  32. A. Bustillo and J. J. Rodríguez, “Online breakage detection of multitooth tools using classifier ensembles for imbalanced data,” International Journal of Systems Science, pp. 1–13, 2013. View at Publisher · View at Google Scholar
  33. J.-F. Díez-Pastor, A. Bustillo, G. Quintana, and C. García-Osorio, “Boosting projections to improve surface roughness prediction in high-torque milling operations,” Soft Computing, vol. 16, no. 8, pp. 1427–1437, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. A. Bustillo, E. Ukar, J. J. Rodriguez, and A. Lamikiz, “Modelling of process parameters in laser polishing of steel components using ensembles of regression trees,” International Journal of Computer Integrated Manufacturing, vol. 24, no. 8, pp. 735–747, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. A. Bustillo, J.-F. Díez-Pastor, G. Quintana, and C. García-Osorio, “Avoiding neural network fine tuning by using ensemble learning: application to ball-end milling operations,” The International Journal of Advanced Manufacturing Technology, vol. 57, no. 5–8, pp. 521–532, 2011. View at Publisher · View at Google Scholar · View at Scopus
  36. S. Ferreiro, B. Sierra, I. Irigoien, and E. Gorritxategi, “Data mining for quality control: burr detection in the drilling process,” Computers & Industrial Engineering, vol. 60, no. 4, pp. 801–810, 2011. View at Publisher · View at Google Scholar · View at Scopus
  37. B. E. Boser, I. M. Guyon, and V. N. Vapnik, “Training algorithm for optimal margin classifiers,” in Proceedings of the 5th Annual Workshop on Computational Learning Theory, pp. 144–152, ACM, Pittsburgh, Pa, USA, July 1992. View at Publisher · View at Google Scholar · View at Scopus
  38. R. Beale and T. Jackson, Neural Computing: An Introduction, IOP Publishing, Bristol, UK, 1990.
  39. A. Sykes, An Introduction to Regression Analysis, Law School, University of Chicago, 1993.
  40. X. Wu, V. Kumar, Q. J. Ross et al., “Top 10 algorithms in data mining,” Knowledge and Information Systems, vol. 14, no. 1, pp. 1–37, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. N. Tosun and L. Özler, “A study of tool life in hot machining using artificial neural networks and regression analysis method,” Journal of Materials Processing Technology, vol. 124, no. 1-2, pp. 99–104, 2002. View at Publisher · View at Google Scholar · View at Scopus
  42. A. Azadeh, S. F. Ghaderi, and S. Sohrabkhani, “Annual electricity consumption forecasting by neural network in high energy consuming industrial sectors,” Energy Conversion and Management, vol. 49, no. 8, pp. 2272–2278, 2008. View at Publisher · View at Google Scholar · View at Scopus
  43. P. Palanisamy, I. Rajendran, and S. Shanmugasundaram, “Prediction of tool wear using regression and ANN models in end-milling operation,” The International Journal of Advanced Manufacturing Technology, vol. 37, no. 1-2, pp. 29–41, 2008. View at Publisher · View at Google Scholar · View at Scopus
  44. S. Vijayakumar and S. Schaal, “Approximate nearest neighbor regression in very high dimensions,” in Nearest-Neighbor Methods in Learning and Vision: Theory and Practice, pp. 103–142, MIT Press, Cambridge, Mass, USA, 2006. View at Google Scholar
  45. L. Kuncheva, “Combining classifiers: soft computing solutions,” in Pattern Recognition: From Classical to Modern Approaches, pp. 427–451, 2001. View at Google Scholar
  46. J. Yu, L. Xi, and X. Zhou, “Identifying source (s) of out-of-control signals in multivariate manufacturing processes using selective neural network ensemble,” Engineering Applications of Artificial Intelligence, vol. 22, no. 1, pp. 141–152, 2009. View at Publisher · View at Google Scholar · View at Scopus
  47. T. W. Liao, F. Tang, J. Qu, and P. J. Blau, “Grinding wheel condition monitoring with boosted minimum distance classifiers,” Mechanical Systems and Signal Processing, vol. 22, no. 1, pp. 217–232, 2008. View at Publisher · View at Google Scholar · View at Scopus
  48. S. Cho, S. Binsaeid, and S. Asfour, “Design of multisensor fusion-based tool condition monitoring system in end milling,” The International Journal of Advanced Manufacturing Technology, vol. 46, no. 5–8, pp. 681–694, 2010. View at Publisher · View at Google Scholar · View at Scopus
  49. S. Binsaeid, S. Asfour, S. Cho, and A. Onar, “Machine ensemble approach for simultaneous detection of transient and gradual abnormalities in end milling using multisensor fusion,” Journal of Materials Processing Technology, vol. 209, no. 10, pp. 4728–4738, 2009. View at Publisher · View at Google Scholar · View at Scopus
  50. H. Akaike, “A new look at the statistical model identification,” IEEE Transactions on Automatic Control, vol. 19, no. 6, pp. 716–723, 1974. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  51. J. R. Quinlan, “Learning with continuous classes,” in Proceedings of the 5th Australian Joint Conference on Artificial Intelligence, vol. 92, pp. 343–348, Singapore, 1992.
  52. T. M. Khoshgoftaar, E. B. Allen, and J. Deng, “Using regression trees to classify fault-prone software modules,” IEEE Transactions on Reliability, vol. 51, no. 4, pp. 455–462, 2002. View at Publisher · View at Google Scholar · View at Scopus
  53. T. K. Ho, “The random subspace method for constructing decision forests,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 20, no. 8, pp. 832–844, 1998. View at Publisher · View at Google Scholar · View at Scopus
  54. T. G. Dietterichl, “Ensemble learning,” in The Handbook of Brain Theory and Neural Networks, pp. 405–408, 2002. View at Google Scholar
  55. L. Breiman, “Bagging predictors,” Machine Learning, vol. 24, no. 2, pp. 123–140, 1996. View at Google Scholar · View at Scopus
  56. Y. Freund and R. E. Schapire, “Experiments with a new boosting algorithm,” in Proceedings of the 13th International Conference on Machine Learning (ICML '96), vol. 96, pp. 148–156, Bari, Italy, 1996.
  57. Y. Freund and R. E. Schapire, “A desicion-theoretic generalization of on-line learning and an application to boosting,” in Computational Learning Theory, pp. 23–37, Springer, Berlin, Germany, 1995. View at Publisher · View at Google Scholar
  58. L. Breiman, “Using iterated bagging to debias regressions,” Machine Learning, vol. 45, no. 3, pp. 261–277, 2001. View at Publisher · View at Google Scholar · View at Scopus
  59. H. Drucker, “Improving regressors using boosting techniques,” in Proceedings of the 14th International Conference on Machine Learning (ICML '97), vol. 97, pp. 107–115, Nashville, Tenn, USA, 1997.
  60. J. H. Friedman, “Stochastic gradient boosting,” Computational Statistics & Data Analysis, vol. 38, no. 4, pp. 367–378, 2002. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  61. D. W. Aha, D. Kibler, and M. K. Albert, “Instance-based learning algorithms,” Machine Learning, vol. 6, no. 1, pp. 37–66, 1991. View at Publisher · View at Google Scholar · View at Scopus
  62. A. J. Smola and B. Schölkopf, “A tutorial on support vector regression,” Statistics and Computing, vol. 14, no. 3, pp. 199–222, 2004. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  63. C. Cortes and V. Vapnik, “Support-vector networks,” Machine Learning, vol. 20, no. 3, pp. 273–297, 1995. View at Publisher · View at Google Scholar · View at Scopus
  64. J. E. Dayhoff and J. M. DeLeo, “Artificial neural networks: opening the black box,” Cancer, vol. 91, supplement 8, pp. 1615–1635, 2001. View at Google Scholar · View at Scopus
  65. K. Hornik, M. Stinchcombe, and H. White, “Multilayer feedforward networks are universal approximators,” Neural Networks, vol. 2, no. 5, pp. 359–366, 1989. View at Google Scholar · View at Scopus
  66. W. H. Delashmit and M. T. Manry, “Recent developments in multilayer perceptron neural networks,” in Proceedings of the 7th Annual Memphis Area Engineering and Science Conference (MAESC '05), 2005.
  67. C. Nadeau and Y. Bengio, “Inference for the generalization error,” Machine Learning, vol. 52, no. 3, pp. 239–281, 2003. View at Publisher · View at Google Scholar · View at Scopus