Journal of Applied Mathematics
Volume 2014 (2014), Article ID 470320, 9 pages
http://dx.doi.org/10.1155/2014/470320
Research Article
Optimization of Process Parameters of Stamping Forming of the Automotive Lower Floor Board
College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, China
Received 19 May 2014; Revised 4 August 2014; Accepted 7 August 2014; Published 18 August 2014
Academic Editor: Ricardo Perera
Copyright © 2014 Guoying Ma and Binbing Huang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Linked References
- M. Cavazzuti, A. Baldini, E. Bertocchi, D. Costi, E. Torricelli, and P. Moruzzi, “High performance automotive chassis design: a topology optimization based approach,” Structural and Multidisciplinary Optimization, vol. 44, no. 1, pp. 45–56, 2011. View at Publisher · View at Google Scholar · View at Scopus
- F. Bi, S. J. Hu, and B. Song, “Application of non-Gaussian closure method in automotive chassis non-linear vibration analysis,” Forschung im Ingenieurwesen, vol. 75, no. 3, pp. 153–163, 2011. View at Publisher · View at Google Scholar · View at Scopus
- N.-M. Wang and B. Budiansky, “Analysis of sheet metal stamping by a finite element method,” Journal of Applied Mechanics, vol. 45, no. 1, pp. 73–82, 1978. View at Publisher · View at Google Scholar · View at Scopus
- N. Wang and S. Tang, “Analysis of bending effects in sheet forming operation,” International Journal for Numerical Methods in Engineering, vol. 25, no. 1, pp. 253–267, 1988. View at Google Scholar
- M. Kawka, T. Kakita, and A. Makinouchi, “Simulation of multi-step sheet metal forming processes by a static explicit FEM code,” Journal of Materials Processing Technology, vol. 80-81, pp. 54–59, 1998. View at Google Scholar · View at Scopus
- J. Mackerle, “Finite element analyses and simulations of sheet metal forming processes,” Engineering Computations, vol. 21, no. 8, pp. 891–940, 2004. View at Publisher · View at Google Scholar · View at Scopus
- Y. Wen, W. Zhong, and Y. Liu, “Optimization design of process parameters in sheet metal drawing,” Journal of Plasticity Engineering, vol. 20, no. 3, pp. 31–36, 2013. View at Publisher · View at Google Scholar · View at Scopus
- J. Pan, Y. Zhong, and C. Yuan, “Process parameters optimization for sheet metal forming during drawing with a multi-objective genetic algorithm,” Journal of Tsinghua University, vol. 47, no. 8, pp. 1267–1269, 2007. View at Google Scholar · View at Scopus
- E. Gao, H. Li, H. Kou, H. Chang, J. Li, and L. Zhou, “Influences of material parameters on deep drawing of thin-walled hemispheric surface part,” Transactions of Nonferrous Metals Society of China, vol. 19, no. 2, pp. 433–437, 2009. View at Publisher · View at Google Scholar · View at Scopus
- W. Liu and Y. Yang, “Study on process optimization and objective functions of sheet metal forming based on FEA,” Material Science and Technology, vol. 14, no. 2, pp. 159–161, 2006 (Chinese). View at Google Scholar · View at Scopus
- W. Chen, Sheet Metal Forming CAE Analysis Tutorial, China Machine Press, Beijing, China, 2005, (Chinese).
- F. Barlat and J. Lian, “Plastic behavior and stretchability of sheet metals. Part I: a yield function for orthotropic sheets under plane stress conditions,” International Journal of Plasticity, vol. 5, no. 1, pp. 51–66, 1989. View at Publisher · View at Google Scholar · View at Scopus
- D. Ko, S. Cha, S. Lee, C. Lee, and B. Kim, “Application of a feasible formability diagram for the effective design in stamping processes of automotive panels,” Materials and Design, vol. 31, no. 3, pp. 1262–1275, 2010. View at Publisher · View at Google Scholar · View at Scopus
- M. Firat, O. H. Mete, U. Kocabicak, and M. Ozsoy, “Stamping process design using FEA in conjunction with orthogonal regression,” Finite Elements in Analysis and Design, vol. 46, no. 11, pp. 992–1000, 2010. View at Publisher · View at Google Scholar · View at Scopus
- K. Park and Y. Kim, “The effect of material and process variables on the stamping formability of sheet materials,” Journal of Materials Processing Technology, vol. 51, no. 1–4, pp. 64–78, 1995. View at Publisher · View at Google Scholar · View at Scopus
- L. Chen, W. Chen, J. D. Li, S. N. Heng, and J. Wu, “Optimal design about parameters of cooling pipes in hot stamping die,” Advanced Materials Research, vol. 988, pp. 263–267, 2014. View at Google Scholar
- S. Wu, Sheet Metal Forming Technology and Mold Design, Northwestern Polytechnical University Press, Xi’an, China, 2002 (Chinese).
- K. Chung, K. Hyunki, and C. Lee, “Forming limit criterion for ductile anisotropic sheets as a material property and its deformation path insensitivity, part i: deformation path insensitive formula based on theoretical models,” International Journal of Plasticity, vol. 58, no. 7, pp. 3–34, 2014. View at Publisher · View at Google Scholar