Abstract

This paper reviews the speciation and determination of mercury by various analytical techniques such as atomic absorption spectrometry, voltammetry, inductively coupled plasma techniques, spectrophotometry, spectrofluorometry, high performance liquid chromatography, and gas chromatography. Approximately 126 research papers on the speciation and determination of mercury by various analytical techniques published in international journals since 2013 are reviewed.

1. Introduction

Mercury, which is also known as quick silver, is only the metal (Figure 1) in the modern periodic table that exists in liquid form at room temperature. The sources of mercury in the environment include the natural processes, such as breakdown of minerals in rocks and volcanic activities. The anthropogenic sources are not limited to mining and the burning of fossil fuels. Regarding the toxicity of mercury and its different species, methylmercury poisoning affects the nervous system of humans and damages the brain and kidneys [1]. Most of the mercury emitted into the environment is converted to methylmercury, which spreads to the food chain due to the bioaccumulation nature of methylmercury [2]. Owing to the toxicity nature and bioaccumulation nature of mercury, most studies in this area have focused on the determination of mercury and its species in various environmental and biological samples.

Marumoto and Imai [3] reported the determination of dissolved gaseous mercury in the seawater of Minamata Bay of Japan. This study also estimated the exchange of mercury across the air-sea interface. Panichev and Panicheva [4] reported the determination of the total mercury content in fish and sea products by thermal decomposition atomic absorption spectrometry. Fernández-Martínez et al. [5] evaluated different digestion systems for the determination of mercury with CV-AFS (cold-vapor atomic fluorescence spectrometer) in seaweeds. Pinedo-Hernández et al. [6] examined the speciation and bioavailability of mercury in sediments that had been impacted by gold mining in Colombia.

This paper presented the recent developments in this topic after a previous review published in 2013 [2]. The present study reviews the recent developments in the speciation and determination studies of mercury reported and published since 2013. For this purpose, approximately 136 research papers published were reviewed. All the analytical parameters such as limit of detection, linearity range, and interference study reported by the reviewed papers are presented in Tables 1–4 [7133]. This extensive collection of literature and the analytical parameters of the reviewed papers established the recent developments in the determination and speciation studies of mercury using a range of analytical techniques.

2. Discussion

The toxicity and bioaccumulation nature of mercury has prompted extensive studies to determine the concentrations of mercury species in different environmental and biological samples. This paper reviewed a large number of studies on the determination and speciation of toxic metals including mercury. The reviews regarding the determination of mercury published since 2013 are discussed hereunder.

Suvarapu et al. [2] reviewed research papers published between 2010 and 2011 regarding the speciation and determination of mercury using a variety of analytical techniques. They concluded that most researchers prefer cold-vapor atomic absorption spectrometry (CV-AAS) and atomic absorption spectrofluorometry (CV-AFS) for the speciation and determination studies of mercury in various environmental samples. Suvarapu et al. [134] also reviewed research papers published in 2012 regarding the determination of mercury in various environmental samples. El-Shahawi and Al-Saidi [135] reviewed the dispersive liquid-liquid microextraction (DLLME) method for the speciation and determination of metal ions including mercury. This review concluded that the method of DLLME has the advantages of simplicity, speed, and low cost for the determination of metal ions using various analytical techniques. Ferreira et al. [136] reviewed the use of reflux systems for the sample preparation in the determination of elements, such as arsenic, antimony, cadmium, lead, and mercury. This study concluded that the use of the reflux systems is very rare in the determination of elements, such as Hg. Gao et al. [137] reviewed the application of chemical vapor generation method for the determination of metal ions, such as mercury and cadmium with ICP-MS. Sańchez et al. [138] reviewed the determination of trace elements including mercury present in petroleum products using ICP techniques. This study concluded that the electrothermal vaporization and laser ablation methods were promising for the analysis of petroleum for trace elements. Martín-Yerga et al. [139] reviewed the determination of mercury using electrochemical methods. This study discussed the advantages and disadvantages of the use of different electrodes in the determination of mercury. Chang et al. [140] reviewed the detection of heavy metals, such as cadmium, lead, and mercury in water samples using graphene based sensors. This study concluded that it is a very challenging task to detect heavy metals in water in real time due to the interference of large chemical and biological species in water. Yu and Wang [141] reviewed the determination of metal ions including mercury by atomic spectrometry by applying flow-based sample pretreatment methods. They concluded that the ICP-AES, AAS, AFS, and ICP-MS are the major detection techniques for trace metal analysis. Yin et al. [142] reviewed the speciation analysis of mercury, arsenic, and selenium using a range of analytical techniques. Gao and Huang [143] reviewed the determination of mercury(II) ions by voltammetry and concluded that stripping voltammetry is still an active field of research regarding the determination of mercury. Duarte et al. [144] reviewed disposable sensors and electrochemical sensors for the environmental monitoring of Pb, Cd, and Hg. They recommended the recycling of materials used in sensors for future studies. Recently, Ferreira et al. [145] reviewed the analytical strategies of sample preparation for the determination of mercury in food matrices.

In recent days, few research papers were published about the determination and analysis of mercury species in various environmental and biological samples and some of them are discussed hereunder. Lima et al. [146] reported an efficient method for the determination of mercury in inorganic fertilizers by using CV-AAS combined with microwave-induced plasma spectrometry. Pelcová et al. [147] reported the simultaneous determination of mercury species by LC-AFS with a low detection limit of 13–38 ng L−1. Chen et al. [148] reported a colorimetric method for the determination of mercury ions based on gold nanoparticles and thiocyanuric acid. Fernández et al. [149] reported gold nanostructured screen-printed carbon electrodes for the determination of mercury using dispersive liquid-liquid microextraction. Fernández-Martínez et al. [5] evaluated the different digestion systems for determination of mercury in seaweeds using CV-AFS. Silva et al. [150] determined the trace amounts of mercury in alcohol vinegar samples collected from Salvador, Bahia of Brazil. Jarujamrus et al. [151] reported a colorimetric method using unmodified silver nanoparticles for the determination of mercury in water samples. A highly selective method for the determination of mercury using a glassy carbon electrode modified with nano-TiO2 and multiwalled carbon nanotubes in river and industrial wastewater was reported by Mao et al. [152].

As mentioned in our previous review [2], spectrometric techniques are used widely by many researchers for the determination of mercury over the world. Regarding the determination of mercury with various analytical instruments in the papers reviewed, more than 55% of the researchers used spectrometric instruments, such as atomic absorption spectrometry (AAS), inductively coupled plasma techniques (ICP-OES, AES, and MS), and atomic fluorescence spectrometer (AFS) (Table 1). ICP-MS technique has an advantage of low detection limits and wide range of linearity in the determination of mercury [153]. Around 20% of the researchers chose the spectrophotometer and spectrofluorometer (Table 2) for the determination and speciation of mercury. Approximately 10% of researchers in the papers reviewed used electrochemical instruments for the determination and speciation studies of mercury (Table 3). Only a few authors chose the HPLC, GC, and other techniques (Table 4) but they coupled these instruments with AAS or other instruments. Regarding the analysis of the environmental biological samples for mercury and its species, most researchers analyzed various water samples (drinking, seawater, wastewater, river, and lake waters) followed by food samples (mostly fish), human hair, and ambient air. Only a few authors determined the concentration of mercury in ambient air and atmospheric particulate matter [26, 48, 52, 66, 119, 126]. Various measurement techniques that can be available for the determination of mercury species in ambient air were reviewed by Pandey et al. [154]. This study also concluded that most of the researchers preferred CV-AAS and CV-AFS technique for the measurement of different mercury species in ambient air. In comparison of methods, acid digestion and thermal method, for the analysis of mercury in ambient air acid digestion, is better than thermal method. By the thermal methods the values can be obtained 30% lower than the acid digestion method [155].

In the analysis of mercury species in various environmental samples, selectivity and range of linearity of the method also play a major role due to the presence of multielements in the real samples. Based on the present study, most of the spectrophotometric, spectrofluorometric, and electroanalytical methods were discussed regarding the interfering ion studies and linearity range of the method. These studies will give a clear picture about the determination of mercury species in presence of other ions which validates the methods.

Regarding the merits of the different methods for speciation and analysis of mercury, the usage of nonchromatographic methods has an advantage in terms of speed of analysis, inexpensiveness, and convenience to find the mercury in various environmental samples. But for the complete speciation studies of mercury in biological and environmental samples chromatographic methods are useful [156]. The validity of analytical methods can be enhanced with the analysis of the certified reference materials along with the real samples. In recent years, the researchers mostly preferred GC coupled with AFS or ICP-MS for the determination and speciation of mercury in natural waters [157]. In electroanalytical methods, the validity of the methods depends on various factors such as type of electrode, preconcentration, and supporting materials [139] and these methods are cost-effective, selective, and sensitive [143].

3. Conclusions

The present study revealed the recent developments in the determination and speciation studies of mercury by a range of analytical techniques. Our previous study [2] also described the challenges in the methodology for mercury determination. This review showed that most researchers focused on the determination of Hg(II) rather than speciation studies. On the other hand, the speciation studies [23, 24, 29, 36, 37, 44, 47, 50, 54, 58, 68, 69, 76, 118] accurately revealed the toxicity of mercury rather than the total mercury or single species determinations. In the papers reviewed, most researchers were aware of the interfering ions in the determination of mercury and its different forms. In the analytical method, a study of interfering ions is very important because it can predict the selectivity of the method. In future studies, it will be important to focus on speciation studies of mercury rather than a determination of the total mercury.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.