Abstract

A new efficient and practical fluorescent probe 6-(benzo[d]thiazol-2-yl)naphthalen-2-yl-thiophene-2-carboxylate (probe 1) was synthesized to detect hydrogen sulfide (H2S). The addition of H2S caused the solution of probe 1 to change from colorless to yellow, and the solution of probe 1 changes to different colors with respect to different concentrations of H2S. Importantly, probe 1 could help detect H2S efficiently by a distinct color response as a visible detection agent. Probe 1 reacted with various concentrations of H2S (0–200 μM), and the detection limit for H2S was 0.10 μM. Particularly, probe 1 can be applied as a sensor to detect H2S accurately in wine samples.

1. Introduction

Hydrogen sulfide (H2S) has unpleasant rotten egg smell [1, 2]. H2S is a significant compound in wine, and a detection threshold value is measured from 1.1 to 1.6 μg/L [3]. Alcoholic fermentation is mainly a way to generate H2S because of enzymatic catabolism of S-amino acid and yeast from elemental sulfite pesticide residues, sulfate, or sulfur [4]. Due to abiotic storage of wine, the level of hydrogen sulfide keeps an increasing trend. Other sources of H2S are investigated all the time [5, 6]. H2S affects the quality of wines and causes economic losses [7, 8].

H2S is an important part in the processes of physiological and pathophysiological responses, and abnormal levels of H2S cause various diseases [9, 10], including cardiac ischemia disease [11], hypertension [12], atherosclerosis [13], diabetes [14], tumor [15], and other diseases. Therefore, the sensitive and selective methods for detecting H2S in wine are required.

The methods to detect H2S include colorimetry [16], electrochemical precipitation [17], metal-induced sulfide precipitation [18], gas chromatography [19], high-performance liquid chromatography-mass spectrometry [6], and sulfide precipitation [20]. Recently, fluorescent probes have been considered a practical tool for H2S detection [2124]. The H2S fluorescent probes are designed by some approaches, such as sulfide-induced precipitation of quantum dots [25, 26], reduction of azide and nitro group to amines [2732], substitution reaction [33], nucleophilic reactions [34, 35], high adsorption of S2− to Cu2+ [36], and the reaction with the unsaturated double bond [37]. Recently, different kinds of fluorescent probes have been designed and compounded to detect H2S in living cells, and development of efficient and practical sensors to detect H2S in wine is still crucial [38]. In order to discover a more responsive and visible colorimetric fluorescent probe, a new fluorescent probe (probe 1) was introduced in this work, with naphthalene and benzothiazole ring moiety as the fluorophore and thiophene-2-carboxylate as the reaction site. Probe 1 shows responsive and visible colorimetric precipitation for H2S with naked eye. Especially, the solution of probe 1 poses different colors at different H2S concentrations under ambient light. Probe 1 could be used as a sensor to obtain H2S levels and to obtain high recovery in real wine samples.

2. Materials and Methods

2.1. General Methods

The chemicals and reagents were purchased from Beijing Huaxue Shiji (Beijing, P.R. China). The reagents were all analytically pure. 1H-NMR and 13C-NMR spectra were recorded at 400 MHz and 100 MHz, respectively. Chemical shifts (δ) were expressed in ppm relative to TMS, and coupling constants (J) are in Hz. The high-resolution mass spectrum (HRMS) was performed at a Bruker Apex IV FTMS. Fluorescence spectra were recorded on a Hitachi F-4600 fluorescence spectrometer with a temperature controller.

2.2. Preparation of Probe 1

6-(benzo[d]thiazol-2-yl)naphthalen-2-ol. 6-hydroxy-2-naphthaldehyde (0.86 g, 5 mmol) and 2-aminothiophenol (0.63 g, 5 mmol) were dissolved in ethanol (25 mL) and stirred for 15 min. And then, p-toluenesulfonic acid (0.34 g, 2 mmol) in ethanol (5 mL) was added into the mixture slowly. The reaction mixture was heated in an oil bath at 80°C overnight. After the mixture was cooled to room temperature, the mixture was added 50 mL distilled water. The precipitate was collected by evaporation and dried to yield 6-(benzo[d]thiazol-2-yl)naphthalen-2-ol as a yellow solid (1.29 g, 93.5%, Scheme 1).

1H NMR (300 MHz, DMSO), δ (ppm): 10.11 (s, 1H), 8.54 (s, 1H), 8.06 (m, 4H), 7.84 (d, J = 8.67 Hz, 1H), 7.53 (td, J = 7.29, 1.17 Hz, 1H), 7.43 (td, J = 7.95, 1.17 Hz, 1H), and 7.16 (m, 2H). 13C NMR (75 MHz, DMSO): δ (ppm): 168, 158, 154, 137, 135, 131, 128, 127, 126, 125, 123, 120, and 109.

Probe 1: 6-(benzo[d]thiazol-2-yl)naphthalen-2-yl-thiophene-2-carboxylate. 6-(benzo[d]thiazol-2-yl)naphthalen-2-ol (0.50 g, 1.8 mmol), CHCl3 (20 mL), and thiophene-2-carbonyl chloride (0.29 g, 1.8 mmol) was added. After stirring 20 min, a drop of trimethylamine was dissolved in CHCl3 (5 mL) and added slowly. The reaction mixture was heated at 80°C for 4 h. The precipitate used evaporation to be collected and then used column chromatography to purify probe 1 as a solid (0.570 g, 81.8%; Scheme 1).

1H NMR (300 MHz, DMSO), δ (ppm): 8.78 (s, 1H), 8.28 (d, J = 4.35 Hz, 2H), 8.20 (d, J = 3.96 Hz, 1H), 8.12–8.14 (m, 4H), 8.11 (d, J = Hz, 1H), 7.96 (s, 1H), 7.58 (t, J = 4.41 Hz, 2H), 7.50 (t, J = 3.78 Hz, 1H), and 7.35 (s, 1H). 13C NMR (75 MHz, DMSO): δ (ppm): 168, 161, 154, 150, 136, 135, 132, 131, 130, 129, 128, 127, 126, 125, 123, and 120. HRMS: calcd. [M]+ 387.0388; 387.0390.

2.3. Preparation of Solutions of Probe 1 and Analytes

The HPLC-grade DMSO as reagent was used to dissolved probe 1. After mixing, probe 1 stock solution was obtained. Analytes NaF, Na2SO3, NaCl, NaHSO3, NaNO3, NaBr, Na2SO4, Na2S2O3, Na2S2O5, NaS2O6, CH3COONa, NaHCO3, and Na2S used distilled water to be dissolved and obtained 10 mM aqueous solutions. Various concentrations could be obtained by using distilled water to dilute the stock solutions.

2.4. Preparation of Wine Samples

Three kinds of beers and four kinds of red wines were bought from wumart supermarket (Beijing) and different concentrations of Na2S were added (Na2S is the H2S source), and the 504 nm fluorescence signals of samples were recorded.

2.5. The Procedures of H2S Determination and Samples Analysis

The ready of the detection system: dimethyl sulfoxide (0.48 mL) and probe solution (0.02 mL) were mixed. And then buffer solution was added and made up to 2 mL in the cuvette. After mixing, the spectrum was tested by recording the fluorescence signals.

Fluorescence spectrophotometer parameters: excitation wavelength, 330 nm; emission wavelength, 504 nm; temperature, 37°C; voltage, 700 v; slit width, 5 nm/5 nm.

3. Results and Discussion

3.1. Fluorescent Probe Preparation

Probe 1 was synthesized in just a two-step reaction. First, the intermediate compound 3 was manufactured by nucleophilic addition reaction and cyclodehydration of compound 1 with compound 2. Second, probe 1 was obtained so that compound 3 and thiophene-2-carbonyl chloride (compound 4) performed an esterification reaction. This synthetic process and the purification of silica gel column chromatographic separation were easy. 1H NMR and 13C NMR (Figures S1 and S2) were used to determine the structure of 6-(benzo[d]thiazol-2-yl)naphthalene-2-ol, light yellow powder. The structure of Probe 1 was characterized by 1H NMR, 13C NMR, and HRMS (Figures S3S5).

3.2. Sensing Property of Probe 1 towards H2S

The fluorescence response of probe 1 (10 μM) to Na2S (we used Na2S for H2S production) was firstly verified in 10 mM phosphate buffer saline (PBS; pH 7.4) in DMSO at 37°C. According to Figure 1(a), the fluorescence intensity was detected at 1, 3, 5, 7, 9, 11, 15, 20, 25, 30, and 35 min after 200 μM H2S was added, and the fluorescence intensity increased almost three times. The fluorescence signal at 504 nm increased all the time until 30 min (Figure 1(b)). The results suggest that probe 1 shows good response to H2S in neutral environment.

The fluorescent response of probe 1 to H2S in different pH values (Table S1) from 3.0 to 10.0 was investigated (Figure 2(a)). The data suggest that the fluorescent intensity of probe 1 did not change in various pH values. However, as H2S was added, the fluorescent intensity of probe 1 increased quickly from 3.0 to 4.0 and decreased from 4.0 to 9.0. The fluorescence intensity showed largest differences between probe 1 and probe 1-H2S in pH 4.0. The water solubility of H2S was reported as an equilibrium between molecular and ionic forms (H2S ⇌ HS ⇌ S2−) [39]. The pKa values for the first and second dissociation steps are 7.0 and 12.0, respectively [39]. The major form of hydrogen sulfide exists as HS with a minor form of free H2S in pH 7.4 [39] and exists as free H2S in pH 4.0. The fluorescent intensity of probe 1-H2S decreased indicating that the reaction activity of probe 1 to H2S decreased. So, the reaction activity of probe 1 to H2S decreased from 4.0 to 7.0, increased from 4.0 to 7.4, and then decreased from 7.4 to 9.0. As probe 1 can identify H2S, HS, and S2− [40], the reaction activity of probe 1 to H2S with pH is generally not too obvious regularity. The above results reveal that the pH value of 4.0 is better suitable for further studies.

The fluorescence response of probe 1 (10 μM) to H2S was verified in 10 mM buffer solution (pH 4.0) in DMSO at 37°C, the fluorescence signal at 504 nm increases all the time until 30 min (Figure S6). The fluorescence response of free probe 1 (10 μM) and H2S (200 μM) added to probe 1 in buffer solution (pH 4.0) is shown in Figure 2(b). Meanwhile, the solution color changed from colorless to yellow (Figure 2(c)). All results indicate that probe 1 was a turn-on fluorescent probe and could be applied to detect H2S in this experimental condition by the naked eye.

The solution of probe 1 in buffer solution (pH 4.0) was added with different concentrations of H2S (0–200 μM), and the change of fluorescence intensity was recorded. As shown in Figure 3(a), a highest fluorescence peak was shown at 504 nm, and the fluorescence intensity was increasing with the addition of H2S. The highest of fluorescence intensity was reached in the presence of 200 μM H2S. The data could make a good linearity, R2 = 0.9959 (Figure 3(b)). The detection limit (LOD) of probe 1 for H2S was 0.1 μM, based on Cim = 3 SD/B according to the definition from IUPAC. These results suggest that pH 4.0 was the best pH value for probe 1 to detect H2S and provide a nice quantitative detection method for H2S.

To verify the selectivity of probe 1 for H2S, GSH, F, Cl, Br, SO32−, HSO3, S2O32−, S2O52−, S2O6, CH3COO, SO42−, HCO3, and CO32− in buffer solution (pH 4.0) was chosen as the complex condition to research the fluorescent response of probe 1. As shown in Figure 3(c), under this condition, the competitor did not cause the fluorescence change obviously. At the same time, competition experiments were conducted by adding H2S to the probe 1 solutions containing the above analytes. Fluorescent response of probe 1 shows that fluorescence had no changes toward H2S and H2S + competitor. It clearly indicated that the presence of competitor did not interfere with H2S detection. In addition, only H2S caused the probe 1 solution to change color from colorless to yellow (Figure 3(d)). Based on the above result, it indicated that probe 1 has good recognition toward H2S in complex environment. Using probe 1 solution develops a test strip system (10 μM; buffer solution: DMSO = 3 : 1, pH 4.0). The test strip system showed different color changes to different concentrations of H2S ranging from 0 μM to 600 μM (Figure 3(e)). So, these data show that probe 1 can be used to develop an easy-to-detect test strip system for an effective method to monitor H2S by the naked eye.

3.3. Reaction Mechanism

A possible response mechanism may attribute to H2S-induced hydrolysis of thenoic acid ether moiety in probe 1 and thereby generate 6-(benzo[d]thiazol-2-yl)naphthalen-2-ol (compound 3) and 2-thiophenecarboxylic acid (compound 5), as shown in Scheme 2. To verify the response mechanism mentioned above, reaction of probe 1 with H2S was analyzed by GC-MS (Figure S6). A peak at 5.40 min, m/z = 142.0 was the reaction product generated by the esterification reaction of compound 6 with methanol. Peak at 22.18 min, m/z = 277.1, which correlated to the formation of compound 3. The results suggest that probe 1 can react with H2S efficiently and verify the proposed mechanism.

3.4. Detection of H2S in Wine

As H2S negatively affects wine quality, it is an important reason to cause faulty wine. The data of probe 1 to detect H2S in real samples were recorded to prove the actual practicability of probe 1. Three kinds of beers and four kinds of red wines were bought from Wumart supermarket (Beijing) and were added to the solution of probe 1 (10 μM; pH 4.0). Then, H2S of different concentration levels (50 μM and 100 μM) were added. The fluorescence intensity of all these samples was investigated at 504 nm.

As shown in Table 1, 0.53, 0.69, 0.74, and 0.49 μM were obtained in four red wine samples. 0.41, 0.28, and 0.32 μM were founded in three beer samples. Probe 1 can detect H2S concentration in red wine and beer, and the recovery ranged from 90.65% to 110.00% showing that probe 1 has good practicability to detect H2S levels in real samples. The results show that the probe 1 as a testing method is feasible and practical to determinate H2S in wine.

Probe 1 is compared with some previously reported H2S fluorescent probe in terms of detection range, detection limit, and practical applications as listed in Table S2. Majority of H2S fluorescent probes have been designed and used for biological imaging, but H2S fluorescent probes for wine are rare. In this work, probe 1 has different color changes for different concentrations of H2S ranging from 0 μM to 600 μM. Probe 1 has a wider detection range (0–200 μM) than our previous fluorescent probes and reported H2S fluorescent probes (Table S2). Furthermore, probe 1 has successfully been used to detect H2S concentrations in red wine and beer. In addition, the visual change indicates that probe 1 can be used to develop a naked eye detection agent to detect H2S levels.

4. Conclusions

In summary, we developed a sensitive and visible colorimetric fluorescent probe to detect H2S. The function of probe 1 relies on H2S-induced make thenoic acid ether group cleave, and the produced fluorophores (6-(benzo[d]thiazol-2-yl)naphthalen-2-ol and compound 3 were verified by GC-MS studies. When probe 1 reacted with H2S, the solution color changed from colorless to yellow, and addition of different concentrations of H2S posed different color changes, indicating that probe 1 could be employed as a testing tool for H2S. Furthermore, our work shows that probe 1 has been successfully applied to test H2S levels in red wine and beer samples.

Data Availability

The data used to support the findings of this study are included within the article.

Conflicts of Interest

The authors declare that there are no conflicts of interest regarding the publication of this article.

Acknowledgments

The authors thank the Scientific and Technological Innovation and Service Capacity Building (basic research business funding) for funding the study on the flavor of typical Chinese traditional dishes (PXM2018-014213-000033) and the Support Project of High-Level Teachers in Beijing Municipal Universities in the period of 13th Five-Year Plan (CIT&TCD201804021).

Supplementary Materials

Experiment section. Figure S1: 1H NMR spectra of 6-(benzo[d]thiazol-2-yl)naphthalen-2-ol. Figure S2: 13C NMR spectra of 6-(benzo[d]thiazol-2-yl)naphthalen-2-ol. Figure S3: 1H NMR spectra of probe 1. Figure S4: 13C NMR spectra of probe 1. Figure S5: HRMS spectra of probe 1. Figure S6: the time-dependent fluorescence spectra in pH 4.0 buffer. Figure S7: GC-MS spectra of probe 1-H2S. Table S1: disposition of different pH buffer solutions. Table S2: comparison of fluorescent probes for H2S. (Supplementary Materials)