Table of Contents Author Guidelines Submit a Manuscript
Journal of Advanced Transportation
Volume 2017, Article ID 4125384, 19 pages
https://doi.org/10.1155/2017/4125384
Research Article

Electric Vehicle Longitudinal Stability Control Based on a New Multimachine Nonlinear Model Predictive Direct Torque Control

Electrotechnical Engineering Laboratory, Tahar Moulay University, Saida, Algeria

Correspondence should be addressed to Abdelkader Merah; rf.oohay@kea_harem

Received 3 March 2017; Accepted 28 August 2017; Published 12 November 2017

Academic Editor: Xing Wu

Copyright © 2017 M’hamed Sekour et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Hori, “Future vehicle driven by electricity and control: research on four-wheel-motored ‘UOT Electric March II’,” IEEE Transactions on Industrial Electronics, vol. 51, no. 5, pp. 954–962, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. C. Ma, M. Xu, and H. Wang, “Dynamic emulation of road/tyre longitudinal interaction for developing electric vehicle control systems,” Vehicle System Dynamics, vol. 49, no. 3, pp. 433–447, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. D. Yin, S. Oh, and Y. Hori, “A novel traction control for EV based on maximum transmissible torque estimation,” IEEE Transactions on Industrial Electronics, vol. 56, no. 6, pp. 2086–2094, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Geng, L. Mostefai, M. Denai, and Y. Hori, “Direct yaw-moment control of an in-wheel-motored electric vehicle based on body slip angle fuzzy observer,” IEEE Transactions on Industrial Electronics, vol. 56, no. 5, pp. 1411–1419, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. X. Liu, C. Ma, M. Li, and M. Xu, “A kriging assisted direct torque control of brushless DC motor for electric vehicles,” in Proceedings of the 2011 7th International Conference on Natural Computation, ICNC 2011, pp. 1705–1710, July 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. X. Liu, M. Li, C. Ma, and M. Xu, “Kriging assisted on-line torque calculation for brushless DC motors used in electric vehicles,” in Proceedings of the 21st IEEE International Symposium on Industrial Electronics, ISIE 2012, pp. 1496–1501, May 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Long, S. T. Lim, J. H. Ryu, and K. T. Chong, “Energy-regenerative braking control of electric vehicles using three-phase brushless direct-current motors,” Energies, vol. 7, no. 1, pp. 99–114, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Xu, W. Li, K. Xu, and Z. Song, “An intelligent regenerative braking strategy for electric vehicles,” Energies, vol. 4, no. 9, pp. 1461–1477, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. D. Zhang, G. Liu, W. Zhao, P. Miao, Y. Jiang, and H. Zhou, “A neural network combined inverse controller for a two-rear-wheel independently driven electric vehicle,” Energies, vol. 7, no. 7, pp. 4614–4628, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Kang, J. Yoo, and K. Yi, “Driving control algorithm for maneuverability, lateral stability, and rollover prevention of 4WD electric vehicles with independently driven front and rear wheels,” IEEE Transactions on Vehicular Technology, vol. 60, no. 7, pp. 2987–3001, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. L. Zhang, L. Li, C. Lin, C. Wang, B. Qi, and J. Song, “Coaxial-coupling traction control for a four-wheel-independent-drive electric vehicle on a complex road,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 228, no. 12, pp. 1398–1414, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Pennycott, L. De Novellis, A. Sabbatini, P. Gruber, and A. Sorniotti, “Reducing the motor power losses of a four-wheel drive, fully electric vehicle via wheel torque allocation,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 228, no. 7, pp. 830–839, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. A. G. Ulsoy, H. Peng, and M. Çakmakci, Automotive control systems, Cambridge University Press, 2012.
  14. K. Hartani, M. Bourahla, and Y. Miloud, “New anti-skid control for electric vehicle using behaviour model control based on energetic macroscopic representation,” Journal of Electrical Engineering, vol. 59, no. 5, pp. 225–233, 2008. View at Google Scholar · View at Scopus
  15. K. Jalali, T. Uchida, J. McPhee, and S. Lambert, “Development of a fuzzy slip control system for electric vehicles with in-wheel motors,” SAE International Journal of Alternative Powertrains, vol. 1, no. 1, pp. 46–64, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. W. Pasillas-Lépine, A. Loría, and M. Gerard, “Design and experimental validation of a nonlinear wheel slip control algorithm,” Automatica, vol. 48, pp. 1852–1859, 2012. View at Google Scholar
  17. K. Hartani and A. Draou, “A new multimachine robust based anti-skid control system for high performance electric vehicle,” Journal of Electrical Engineering and Technology, vol. 9, no. 1, pp. 214–230, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. R. De Castro, R. E. Araujo, and D. Freitas, “Wheel slip control of EVs based on sliding mode technique with conditional integrators,” IEEE Transactions on Industrial Electronics, vol. 60, no. 8, pp. 3256–3271, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Yuan, H. Chen, B. Ren, and H. Zhao, “Model predictive slip control for electric vehicle with four in-wheel motors,” in Proceedings of the 34th Chinese Control Conference, CCC 2015, pp. 7895–7900, July 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. C. Zhang, G. Yin, and N. Chen, “The acceleration slip regulation control for two-wheel independent driving electric vehicle based on dynamic torque distribution,” in Proceedings of the 35th Chinese Control Conference, CCC 2016, pp. 5925–5930, July 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Sekour, K. Hartani, A. Draou, and A. Allali, “Sensorless fuzzy direct torque control for high performance electric vehicle with four in-wheel motors,” Journal of Electrical Engineering and Technology, vol. 8, no. 3, pp. 530–543, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. K. Hartani, Y. Miloud, and A. Miloudi, “Improved direct torque control of permanent magnet synchronous electrical vehicle motor with proportional-integral resistance estimator,” Journal of Electrical Engineering and Technology, vol. 5, no. 3, pp. 451–461, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. K. Hartani, M. Bourahla, Y. Miloud, and M. Sekour, “Electronic differential with direct torque fuzzy control for vehicle propulsion system,” Turkish Journal of Electrical Engineering and Computer Sciences, vol. 17, no. 1, pp. 21–38, 2009. View at Google Scholar · View at Scopus
  24. G. H. B. Foo and M. F. Rahman, “Direct torque control of an IPM-synchronous motor drive at very low speed using a sliding-mode stator flux observer,” IEEE Transactions on Power Electronics, vol. 25, no. 4, pp. 933–942, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Preindl and S. Bolognani, “Model predictive direct speed control with finite control set of PMSM drive systems,” IEEE Transactions on Power Electronics, vol. 28, no. 2, pp. 1007–1015, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. Zhang and J. Zhu, “Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency,” IEEE Transactions on Power Electronics, vol. 26, no. 1, pp. 235–248, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. Z. Huaqiang, W. Xinsheng, and W. Pengfei, “Study on direct torque control algorithm based on space vector modulation,” Electric Machines and Control, vol. 16, pp. 13–18, 2012. View at Google Scholar
  28. S. G. Malla, M. H. L. Rao, J. M. R. Malla, R. R. Sabat, J. Dadi, and M. M. Das, “SVM-DTC permanent magnet synchronous motor driven electric vehicle with bidirectional converter,” in Proceedings of the 2013 IEEE International Multi Conference on Automation, Computing, Control, Communication and Compressed Sensing, iMac4s 2013, pp. 742–747, February 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. C. E. García, D. M. Prett, and M. Morari, “Model predictive control: theory and practice—a survey,” Automatica, vol. 25, no. 3, pp. 335–348, 1989. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Morari and E. Zafiriou, Robust process control, Prentice Hall, Englewood Cliffs, NJ, USA, 1989.
  31. R. Errouissi, M. Ouhrouche, W.-H. Chen, and A. M. Trzynadlowski, “Robust cascaded nonlinear predictive control of a permanent magnet synchronous motor with antiwindup compensator,” IEEE Transactions on Industrial Electronics, vol. 59, no. 8, pp. 3078–3088, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. S. Li, K. Li, R. Rajamani, and J. Wang, “Model predictive multi-objective vehicular adaptive cruise control,” IEEE Transactions on Control Systems Technology, vol. 19, no. 3, pp. 556–566, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. A. Bouscayrol, B. Davat, B. De Fornel et al., “Multi-converter multi-machine systems: Application for electromechanical drives,” EPJ Applied Physics, vol. 10, no. 2, pp. 131–147, 2000. View at Publisher · View at Google Scholar · View at Scopus
  34. J. Chiasson, D. Seto, F. Sun, A. Stankovic, and S. Bortoff, “Independent control of two PM motors using a single inverter: Application to elevator doors,” Proceedings of the American Control Conference, vol. 4, pp. 3093–3098, 2002. View at Publisher · View at Google Scholar · View at Scopus
  35. D. Bidart, M. Pietrzak-David, P. Maussion, and M. Fadel, “Mono inverter dual parallel PMSM - Structure and control strategy,” in Proceedings of the 34th Annual Conference of the IEEE Industrial Electronics Society, IECON 2008, pp. 268–273, November 2008. View at Publisher · View at Google Scholar · View at Scopus
  36. K. Hartani, A. Merah, and A. Draou, “Stability enhancement of four-in-wheel motor-driven electric vehicles using an electric differential system,” Journal of Power Electronics, vol. 15, no. 5, pp. 1244–1255, 2015. View at Publisher · View at Google Scholar · View at Scopus
  37. I. D. Landau, Adaptive Control: The Model Reference Approach, Marcel Dekker, New York, NY, USA, 1979. View at MathSciNet
  38. H. Pacejka, Tire and Vehicle Dynamics, Elsevier, 2005.
  39. M. C. Best, “Identifying tyre models directly from vehicle test data using an extended Kalman filter,” Vehicle System Dynamics, vol. 48, no. 2, pp. 171–187, 2010. View at Publisher · View at Google Scholar · View at Scopus
  40. M. Terasaka, ABS control system, ed: Google Patents, 2012.
  41. G. Yin, S. Wang, and X. Jin, “Optimal slip ratio based fuzzy control of acceleration slip regulation for four-wheel independent driving electric vehicles,” Mathematical Problems in Engineering, vol. 2013, Article ID 410864, 7 pages, 2013. View at Publisher · View at Google Scholar