Table of Contents Author Guidelines Submit a Manuscript
Journal of Advanced Transportation
Volume 2018, Article ID 5804536, 19 pages
https://doi.org/10.1155/2018/5804536
Research Article

Design Method of ADAS for Urban Electric Vehicle Based on Virtual Prototyping

Institute of Fundamentals of Machinery Design, Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

Correspondence should be addressed to Wojciech Skarka; lp.lslop@akrakS.hceicjoW

Received 25 June 2017; Revised 17 October 2017; Accepted 12 November 2017; Published 5 March 2018

Academic Editor: Rongxin Cui

Copyright © 2018 Katarzyna Jezierska-Krupa and Wojciech Skarka. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Ammon and W. Schiehlen, “Advanced road vehicles: Control technologies, driver assistance,” in Dynamical Analysis of Vehicle Systems. Theoretical Foundations and Advanced Applications, W. Schiehlen, Ed., pp. 283–304, Springer, New York, NY, USA, 2009. View at Google Scholar
  2. F. Coşkun, Ö. Tuncer, E. Karsligil, and L. Güvenç, “Vision system based lane keeping assistance evaluated in a hardware-in-the-loop simulator,” in Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010, pp. 103–114, Istanbul, Turkey, July 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. O. J. Gietelink, J. Ploeg, B. De Schutter, and M. Verhaegen, “Development of a driver information and warning system with vehicle hardware-in-the-loop simulations,” Mechatronics, vol. 19, no. 7, pp. 1091–1104, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. A. D. Hall, A methodology for Systems Engineering, Van Nostrand, 1962.
  5. A. Belbachir, J. Smal, J. Blosseville, and D. Gruyer, “Simulation-driven validation of advanced driving-assistance systems,” Transport Research Arena – Europe, vol. 48, pp. 1205–1214, 2012. View at Publisher · View at Google Scholar
  6. K. Jezierska-Krupa and W. Skarka, “Using Simulation Method for Designing ADAS Systems for Electric Vehicle. Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering Location: Fed Univ Technol, Curitiba, Brazil, October, 2016,” in Transdisciplinary Engineering: Crossing Boundaries, M. Borsato, N. Wognum, and M. Peruzzini, Eds., vol. 4 of Advances in Transdisciplinary Engineering, pp. 595–604, 2016. View at Google Scholar
  7. E. Hull, K. Jackson, and J. Dick, Requirements Engineering, Springer Science & Business Media, 2005.
  8. G. Pahl and W. Beitz, Engineering Design: A Systematic Approach, Design Council/Springer, 1988.
  9. W. Schiehlen and D. Ammon, Advanced Road Vehicles: Control Technologies, Driver Assistance, Institute of Engineering and Computational Mechanics, University of Stuttgart, Stuttgart, Germany.
  10. B.-F. Wu, H.-Y. Huang, C.-J. Chen, Y.-H. Chen, C.-W. Chang, and Y.-L. Chen, “A vision-based blind spot warning system for daytime and nighttime driver assistance,” Computers and Electrical Engineering, vol. 39, no. 3, pp. 846–862, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Cholewa, W. Skarka, K. Sternal, and M. Targosz, “Electric vehicle for the students’ shell eco-marathon competition. design of the car and telemetry system,” in Telematics in the Transport Environment, Proceedings of the 12th International Conference on Transport Systems Telematics, TST 2012, Katowice-Ustroń, Poland, October, 2012, J. Mikulski, Ed., Communications in Computer and Information Science, pp. 26–33, Springer, Berlin, Germany.
  12. W. Skarka, “Reducing the Energy Consumption of Electric Vehicles,” in Transdisciplinary Lifecycle Analysis of Systems, Proceedings of the 22nd ISPE-Inc International Conference on Concurrent Engineering Location: Delft Univ Technol, Delft, Netherlands, July, 2015, R. Curran, N. Wognum, M. Borsato et al., Eds., vol. 2 of Advances in Transdisciplinary Engineering, pp. 500–509, IOS Press, Amsterdam, Netherlands, 2015. View at Google Scholar
  13. Shell, Shell Eco-marathon, referenced at: https://www.shell.com/energy-and-innovation/shell-ecomarathon.html.
  14. TASS International, PreScan: Simulation of ADAS and Active Safety, 2015, https://www.tassinternational.com/prescan.
  15. A. Jałowiecki and W. Skarka, “Modeling in Ultra-Efficient Vehicle Design. Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering Location: Fed Univ Technol, Curitiba, Brazil October, 2016,” in Transdisciplinary Engineering: Crossing Boundaries, M. Borsato, N. Wognum, M. Peruzzini et al., Eds., vol. 4 of Advances in Transdisciplinary Engineering, pp. 999–1008, 2016. View at Google Scholar
  16. W. Skarka and M. Wąsik, “Aerodynamic Features Optimization of Front Wheels Surroundings for Energy Efficient Car. Proceedings of the 23rd ISPE Inc. International Conference on Transdisciplinary Engineering, Fed Univ Technol, Curitiba, Brazil, October, 2016,” in Transdisciplinary Engineering: Crossing Boundaries, M. Borsato, N. Wognum, M. Peruzzini et al., Eds., vol. 4 of Advances in Transdisciplinary Engineering, pp. 483–492, 2016. View at Google Scholar
  17. LTD Hokuyo Automatic Co. Scanning laser range finder utm-30lx-ew specification. 2012.
  18. K. Cichoński and W. Skarka, “Innovative Control System for High Efficiency Electric Urban Vehicle. Proceedings of the 15th International Conference on Transport Systems Telematics (TST): Wrocław University of Science and Technology, Wroclaw, Poland, April, 2015,” in Mikulski, J, OF. TOOLS, Ed., vol. 531 of Communications in Computer and Information Science, pp. 121–130, 2015. View at Google Scholar
  19. S. A. Rodríguez Flórez, V. Frémont, P. Bonnifait, and V. Cherfaoui, “Multi-modal object detection and localization for high integrity driving assistance,” Machine Vision and Applications, vol. 25, no. 3, pp. 583–598, 2014. View at Publisher · View at Google Scholar · View at Scopus