Table of Contents
Journal of Catalysts
Volume 2014 (2014), Article ID 210371, 7 pages
http://dx.doi.org/10.1155/2014/210371
Research Article

Preliminary Assessment of Oxidation Pretreated Hastelloy as Hydrocarbon Steam Reforming Catalyst

Department of Chemical Engineering, Nagoya University, Chikusa, Nagoya 464-8603, Japan

Received 30 October 2013; Accepted 13 February 2014; Published 24 March 2014

Academic Editor: Hicham Idriss

Copyright © 2014 S. R. de la Rama et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. J. Wang, J. Chang, C. Z. Wu, Y. Fu, and Y. Chen, “The steam reforming of naphthalene over a nickel-dolomite cracking catalyst,” Biomass and Bioenergy, vol. 28, no. 5, pp. 508–514, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. B. Zhao, X. Zhang, L. Chen et al., “Steam reforming of toluene as model compound of biomass pyrolysis tar for hydrogen,” Biomass and Bioenergy, vol. 34, no. 1, pp. 140–144, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Bona, P. Guillén, J. G. Alcalde, L. García, and R. Bilbao, “Toluene steam reforming using coprecipitated Ni/Al catalysts modified with lanthanum or cobalt,” Chemical Engineering Journal, vol. 137, no. 3, pp. 587–597, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. F. Melo and N. Morlanés, “Naphtha steam reforming for hydrogen production,” Catalysis Today, vol. 107-108, pp. 458–466, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. A. W. Budiman, S. H. Song, T. S. Chang, C. H. Shin, and M. J. Choi, “Dry reforming of methane over cobalt catalysts: a literature review of catalyst development,” Catalysis Surveys from Asia, vol. 16, no. 4, pp. 183–197, 2012. View at Google Scholar
  6. P. Forzatti and L. Lietti, “Catalyst deactivation,” Catalysis Today, vol. 52, no. 2-3, pp. 165–181, 1999. View at Google Scholar · View at Scopus
  7. C. H. Bartholomew, “Mechanisms of catalyst deactivation,” Applied Catalysis A, vol. 212, no. 1-2, pp. 17–60, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Han and H. Kim, “The reduction and control technology of tar during biomass gasification/pyrolysis: an overview,” Renewable and Sustainable Energy Reviews, vol. 12, no. 2, pp. 397–416, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Rapagná, H. Provendier, C. Petit, A. Kiennemann, and P. U. Foscolo, “Development of catalysts suitable for hydrogen or syn-gas production from biomass gasification,” Biomass and Bioenergy, vol. 22, no. 5, pp. 377–388, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. C. Courson, E. Makaga, C. Petit, and A. Kiennemann, “Development of Ni catalysts for gas production from biomass gasification. Reactivity in steam- and dry-reforming,” Catalysis Today, vol. 63, no. 2–4, pp. 427–437, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Sehested, J. A. P. Gelten, and S. Helveg, “Sintering of nickel catalysts: effects of time, atmosphere, temperature, nickel-carrier interactions, and dopants,” Applied Catalysis A, vol. 309, no. 2, pp. 237–246, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. X. Guo, Y. Sun, Y. Yu, X. Zhu, and C.-J. Liu, “Carbon formation and steam reforming of methane on silica supported nickel catalysts,” Catalysis Communications, vol. 19, pp. 61–65, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. Q. Ming, T. Healey, L. Allen, and P. Irving, “Steam reforming of hydrocarbon fuels,” Catalysis Today, vol. 77, no. 1-2, pp. 51–64, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Takano, T. Tagawa, and S. Goto, “Carbon deposition on supported nickel catalysts for carbon dioxide reforming of methane,” Journal of the Japan Petroleum Institute, vol. 39, no. 2, pp. 144–150, 1996. View at Google Scholar · View at Scopus
  15. E. Promaros, S. Assabumrungrat, N. Laosiripojana, P. Praserthdam, T. Tagawa, and S. Goto, “Carbon dioxide reforming of methane under periodic operation,” Korean Journal of Chemical Engineering, vol. 24, no. 1, pp. 44–50, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Ito, T. Tagawa, and S. Goto, “Partial oxidation of methane on supported nickel catalysts,” Journal of Chemical Engineering of Japan, vol. 32, no. 3, pp. 274–279, 1999. View at Google Scholar · View at Scopus
  17. T. Tagawa, M. Ito, and S. Goto, “Combined reforming of methane with carbon dioxide and oxygen in molten carbonaceous fuel cell reactor,” Applied Organic Chemistry, vol. 15, pp. 127–134, 2001. View at Google Scholar
  18. T. Tagawa, S. R. de la Rama, S. Kawai, and H. Yamada, “Partial oxidation catalysts derived from Ni containing alloys for biomass gasification process,” Chemical Engineering Transactions, vol. 32, pp. 583–588, 2013. View at Google Scholar
  19. S. R. de la Rama, S. Kawai, H. Yamada, and T. Tagawa, “Evaluation of pre-oxidized SUS304 as a catalyst for hydrocarbon reforming,” ISRN Environmental Chemistry, vol. 2013, Article ID 289071, 5 pages, 2013. View at Publisher · View at Google Scholar
  20. C. Li and K. Suzuki, “Tar property, analysis, reforming mechanism and model for biomass gasification—an overview,” Renewable and Sustainable Energy Reviews, vol. 13, no. 3, pp. 594–604, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. T. Borowiecki and A. Gołcebiowski, “Influence of molybdenum and tungsten additives on the properties of nickel steam reforming catalysts,” Catalysis Letters, vol. 25, no. 3-4, pp. 309–313, 1994. View at Publisher · View at Google Scholar · View at Scopus
  22. L. Devi, K. J. Ptasinski, and F. J. J. G. Janssen, “Pretreated olivine as tar removal catalyst for biomass gasifiers: investigation using naphthalene as model biomass tar,” Fuel Processing Technology, vol. 86, no. 6, pp. 707–730, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. R. Coll, J. Salvadó, X. Farriol, and D. Montané, “Steam reforming model compounds of biomass gasification tars: conversion at different operating conditions and tendency towards coke formation,” Fuel Processing Technology, vol. 74, no. 1, pp. 19–31, 2001. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Jess, “Mechanisms and kinetics of thermal reactions of aromatic hydrocarbons from pyrolysis of solid fuels,” Fuel, vol. 75, no. 12, pp. 1441–1448, 1996. View at Publisher · View at Google Scholar · View at Scopus
  25. C. Fischer, V. Karius, P. G. Weidler, and A. Lüttge, “Relationship between micrometer to submicrometer surface roughness and topography variations of natural iron oxides and trace element concentrations,” Langmuir, vol. 24, no. 7, pp. 3250–3266, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. N. Chikamatsu, T. Tagawa, and S. Goto, “Characterization of a new mixed oxide catalyst derived from hydrogen storage alloy,” Journal of Materials Science, vol. 30, no. 5, pp. 1367–1372, 1995. View at Publisher · View at Google Scholar · View at Scopus
  27. J. H. Park, L. Chen, K. C. Goretta, R. E. Koritala, and U. Balachandran, “Oxidation of Hastelloy C276,” in Proceedings of the International Cryogenic Materials Conference (ICMC '02), vol. 48, 2002.
  28. R. Tu and T. Goto, “Oxidation of Hastelloy-XR alloy for corrosion-resistant glass-coating,” Journal of Materials Science and Technology, vol. 19, no. 1, pp. 19–22, 2003. View at Google Scholar · View at Scopus
  29. G. Doppler, A. X. Trautwein, H. M. Ziethen et al., “Physical and catalytic properties of high-temperature water-gas shift catalysts based upon iron-chromium oxides,” Applied Catalysis, vol. 40, pp. 119–130, 1988. View at Google Scholar · View at Scopus