Table of Contents

Citations to this Journal [90 citations: 83 articles]

Articles published in Journal of Construction Engineering have been cited 90 times. The following is a list of the 83 articles that have cited the articles published in Journal of Construction Engineering.

  • Koichi Suzumori, and Ahmad Athif Faudzi, “Trends in hydraulic actuators and components in legged and tough robots: a review,” Advanced Robotics, pp. 1–19, 2018. View at Publisher · View at Google Scholar
  • Doddy Prayogo, Min-Yuan Cheng, Foek Tjong Wong, Daniel Tjandra, and Duc-Hoc Tran, “Optimization model for construction project resource leveling using a novel modified symbiotic organisms search,” Asian Journal of Civil Engineering, 2018. View at Publisher · View at Google Scholar
  • Qi Fang, Heng Li, Xiaochun Luo, Lieyun Ding, Hanbin Luo, Timothy M. Rose, and Wangpeng An, “Detecting non-hardhat-use by a deep learning method from far-field surveillance videos,” Automation in Construction, vol. 85, pp. 1–9, 2018. View at Publisher · View at Google Scholar
  • Weili Fang, Lieyun Ding, Hanbin Luo, and Peter E.D. Love, “Falls from heights: A computer vision-based approach for safety harness detection,” Automation in Construction, vol. 91, pp. 53–61, 2018. View at Publisher · View at Google Scholar
  • Joseph Asante, Ernest Kissi, and Edward Badu, “Factorial analysis of capacity-building needs of small- and medium-scale building contractors in developing countries,” Benchmarking: An International Journal, vol. 25, no. 1, pp. 357–372, 2018. View at Publisher · View at Google Scholar
  • Chameera Udawattha, Himahansi Galkanda, Isuri Shanika Ariyarathne, G.Y. Jayasinghe, and Rangika Halwatura, “Mold growth and moss growth on tropical walls,” Building and Environment, 2018. View at Publisher · View at Google Scholar
  • Martin Röck, Alexander Hollberg, Guillaume Habert, and Alexander Passer, “LCA and BIM: Visualization of environmental potentials in building construction at early design stages,” Building and Environment, 2018. View at Publisher · View at Google Scholar
  • Jacobus H.F. van Heerden, Innocent Musonda, and Chioma S. Okoro, “Health and safety implementation motivators in the South African construction industry,” Cogent Engineering, vol. 5, no. 1, 2018. View at Publisher · View at Google Scholar
  • Emmanuel Oluwatobi Adebisi, Stephen Okunola Ojo, and Oluwaseyi Olalekan Alao, “Assessment of factors influencing the failure and abandonment of multi-storey building projects in Nigeria,” International Journal of Building Pathology and Adaptation, 2018. View at Publisher · View at Google Scholar
  • Bernardette Soust-Verdaguer, Carmen Llatas, Antonio García-Martínez, and Juan Carlos Gómez de Cózar, “BIM-Based LCA Method to Analyze Envelope Alternatives of Single-Family Houses: Case Study in Uruguay,” Journal of Architectural Engineering, vol. 24, no. 3, pp. 05018002, 2018. View at Publisher · View at Google Scholar
  • Shengyu Guo, Chaohua Xiong, and Peisong Gong, “A real-time control approach based on intelligent video surveillance for violations by construction workers,” Journal of Civil Engineering and Management, vol. 24, no. 1, pp. 67–78, 2018. View at Publisher · View at Google Scholar
  • Gao Lv, Jie Yang, Ning Li, Dexiu Hu, Yan Zhang, and Feng Zhao, “Dielectric Characteristics of Unsaturated Loess and the Safety Detection of the Road Subgrade Based on GPR,” Journal of Sensors, vol. 2018, pp. 1–8, 2018. View at Publisher · View at Google Scholar
  • Martin Röck, Alexander Hollberg, Guillaume Habert, and Alexander Passer, “LCA and BIM: Integrated Assessment and Visualization of Building Elements’ Embodied Impacts for Design Guidance in Early Stages,” Procedia CIRP, vol. 69, pp. 218–223, 2018. View at Publisher · View at Google Scholar
  • Dongxing Xuan, Chi Sun Poon, and Wei Zheng, “Management and sustainable utilization of processing wastes from ready-mixed concrete plants in construction: A review,” Resources, Conservation and Recycling, vol. 136, pp. 238–247, 2018. View at Publisher · View at Google Scholar
  • Ruixuan Wang, and Y. X. Zhang, “Recycling fresh concrete waste: A review,” Structural Concrete, 2018. View at Publisher · View at Google Scholar
  • Hong Xue, Shoujian Zhang, Yikun Su, and Zezhou Wu, “Capital Cost Optimization for Prefabrication: A Factor Analysis Evaluation Model,” Sustainability, vol. 10, no. 1, pp. 159, 2018. View at Publisher · View at Google Scholar
  • Shahid Hussain, Zhu Fangwei, Ahmed Siddiqi, Zaigham Ali, and Muhammad Shabbir, “Structural Equation Model for Evaluating Factors Affecting Quality of Social Infrastructure Projects,” Sustainability, vol. 10, no. 5, pp. 1415, 2018. View at Publisher · View at Google Scholar
  • Kajal Chatterjee, Edmundas Kazimieras Zavadskas, Jolanta Tamošaitienė, Krishnendu Adhikary, and Samarjit Kar, “A Hybrid MCDM Technique for Risk Management in Construction Projects,” Symmetry, vol. 10, no. 2, pp. 46, 2018. View at Publisher · View at Google Scholar
  • Josefina Herrera, Gilles Flamant, Jorge Gironás, Sergio Vera, Carlos Bonilla, Waldo Bustamante, and Francisco Suárez, “Using a Hydrological Model to Simulate the Performance and Estimate the Runoff Coefficient of Green Roofs in Semiarid Climates,” Water, vol. 10, no. 2, pp. 198, 2018. View at Publisher · View at Google Scholar
  • Muhammad Saiful Islam, Madhav Prasad Nepal, Martin Skitmore, and Meghdad Attarzadeh, “Current research trends and application areas of fuzzy and hybrid methods to the risk assessment of construction projects,” Advanced Engineering Informatics, vol. 33, pp. 112–131, 2017. View at Publisher · View at Google Scholar
  • Aslam Hussain, and Saleem Akhtar, “Review of Non-Destructive Tests for Evaluation of Historic Masonry and Concrete Structures,” Arabian Journal for Science and Engineering, 2017. View at Publisher · View at Google Scholar
  • Jongsung Won, and Jack C.P. Cheng, “Identifying potential opportunities of building information modeling for construction and demolition waste management and minimization,” Automation in Construction, 2017. View at Publisher · View at Google Scholar
  • Xiaochao Li, Denghua Zhong, Bingyu Ren, Guichao Fan, and Bo Cui, “Prediction of curtain grouting efficiency based on ANFIS,” Bulletin of Engineering Geology and the Environment, 2017. View at Publisher · View at Google Scholar
  • Rawaz Kurda, Jorge de Brito, and José D. Silvestre, “Combined influence of recycled concrete aggregates and high contents of fly ash on concrete properties,” Construction and Building Materials, vol. 157, pp. 554–572, 2017. View at Publisher · View at Google Scholar
  • Subbiah Karthick, Velu Saraswathy, Seung-Jun Kwon, Han-Seung Lee, Rethinam Natarajan, and Dong-Jin Park, “A novel in-situ corrosion monitoring electrode for reinforced concrete structures,” Electrochimica Acta, 2017. View at Publisher · View at Google Scholar
  • M. Amir A.K, Yasuo Katoh, Hiroshi Katsurayama, Makoto Koganei, and Makoto Mizunuma, “Effects of convection heat transfer on Sunagoke moss green roof: A laboratory study,” Energy and Buildings, 2017. View at Publisher · View at Google Scholar
  • Ephrem Girma Sinesilassie, Syed Zafar Shahid Tabish, and Kumar Neeraj Jha, “Critical factors affecting schedule performance,” Engineering, Construction and Architectural Management, vol. 24, no. 5, pp. 757–773, 2017. View at Publisher · View at Google Scholar
  • Saad Abdel-Karim El-Hamrawy, ahmed Ebrahim Abu El-Maaty, and Ahmed Yousry Akal, “Proposed models to measure quality of highway projects: regression analysis versus statistical - fuzzy approach,” Engineering, Construction and Architectural Management, pp. 00–00, 2017. View at Publisher · View at Google Scholar
  • Abderisak Adam, Per-Erik Bertil Josephson, and Göran Lindahl, “Aggregation of factors causing cost overruns and time delays in large public construction projects,” Engineering, Construction and Architectural Management, vol. 24, no. 3, pp. 393–406, 2017. View at Publisher · View at Google Scholar
  • E. Adinyira, T. E. Kwofie, and F. Quarcoo, “Stakeholder requirements for building energy efficiency in mass housing delivery: the House of Quality approach,” Environment, Development and Sustainability, 2017. View at Publisher · View at Google Scholar
  • L.G.B. Ruiz, R. Rueda, M.P. Cuéllar, and M.C. Pegalajar, “Energy consumption forecasting based on Elman neural networks with evolutive optimization,” Expert Systems with Applications, 2017. View at Publisher · View at Google Scholar
  • Olumuyiwa Bayode Adegun, and Yomi Michael Daisiowa Adedeji, “Review of economic and environmental benefits of earthen materials for housing in Africa,” Frontiers of Architectural Research, 2017. View at Publisher · View at Google Scholar
  • L. Joblot, T. Paviot, D. Deneux, and S. Lamouri, “Literature review of Building Information Modeling (BIM) intended for the purpose of renovation projects,” IFAC-PapersOnLine, vol. 50, no. 1, pp. 10518–10525, 2017. View at Publisher · View at Google Scholar
  • E. G. Sinesilassie, S. Z. S. Tabish, and K. N. Jha, “Critical factors affecting cost performance: a case of Ethiopian public construction projects,” International Journal of Construction Management, pp. 1–12, 2017. View at Publisher · View at Google Scholar
  • Mohamed Saad Bajjou, Anas Chafi, and Abdelali En-Nadi, “A Comparative Study between Lean Construction and the Traditional Production System,” International Journal of Engineering Research in Africa, vol. 29, pp. 118–132, 2017. View at Publisher · View at Google Scholar
  • Moshood Olawale Fadeyi, “The role of building information modeling (BIM) in delivering the sustainable building value,” International Journal of Sustainable Built Environment, 2017. View at Publisher · View at Google Scholar
  • K Ullah, A H Abdullah, S Nagapan, S Suhoo, and M S Khan, “Theoretical framework of the causes of construction time and cost overruns,” IOP Conference Series: Materials Science and Engineering, vol. 271, pp. 012032, 2017. View at Publisher · View at Google Scholar
  • Daniel Domeher, Godwin Musah, and Najib Hassan, “Inter-sectoral Differences in the SME Financing Gap: Evidence from Selected Sectors in Ghana,” Journal of African Business, pp. 1–27, 2017. View at Publisher · View at Google Scholar
  • Rawaz Kurad, José D. Silvestre, Jorge de Brito, and Hawreen Ahmed, “Effect of incorporation of high volume of recycled concrete aggregates and fly ash on the strength and global warming potential of concrete,” Journal of Cleaner Production, 2017. View at Publisher · View at Google Scholar
  • Xuan-Toan Nguyen, Van-Duc Tran, and Nhat-Duc Hoang, “An Investigation on the Dynamic Response of Cable Stayed Bridge with Consideration of Three-Axle Vehicle Braking Effects,” Journal of Computational Engineering, vol. 2017, pp. 1–13, 2017. View at Publisher · View at Google Scholar
  • Richard Oduro Asamoah, John Solomon Ankrah, Philip Bannor, and Kofi Ofei-Nyako, “Construction Practices Contributing to Rising Damp in Kumasi Metropolitan and Ejisu Municipal Assemblies in Ghana,” Journal of Construction Engineering, vol. 2017, pp. 1–6, 2017. View at Publisher · View at Google Scholar
  • Yongtao Tan, Bin Xue, and Yim Ting Cheung, “Relationships between Main Contractors and Subcontractors and Their Impacts on Main Contractor Competitiveness: An Empirical Study in Hong Kong,” Journal of Construction Engineering and Management, pp. 05017007, 2017. View at Publisher · View at Google Scholar
  • Jasper Mbachu, Temitope Egbelakin, Eziaku Onyeizu Rasheed, and Wajiha Mohsin Shahzad, “Influence of key role players on productivity outcomes in the residential building lifecycle,” Journal of Engineering, Design and Technology, pp. 00–00, 2017. View at Publisher · View at Google Scholar
  • Titus Ebenezer Kwofie, Emmanuel Adinyira, and Frank Fugar, “Theoretical and practical implications for engendering project team communication effectiveness in mass housing project delivery in Ghana,” Journal of Engineering, Design and Technology, vol. 15, no. 6, pp. 826–844, 2017. View at Publisher · View at Google Scholar
  • Ahmet Anıl Sezer, “Factors influencing building refurbishment site managers' waste management efforts,” Journal of Facilities Management, pp. 00–00, 2017. View at Publisher · View at Google Scholar
  • Sang-Yeop Chung, Mohamed Abd Elrahman, Pawel Sikora, Teresa Rucinska, Elzbieta Horszczaruk, and Dietmar Stephan, “Evaluation of the Effects of Crushed and Expanded Waste Glass Aggregates on the Material Properties of Lightweight Concrete Using Image-Based Approaches,” Materials, vol. 10, no. 12, pp. 1354, 2017. View at Publisher · View at Google Scholar
  • Keletso Mphahlele, Suprakas Sinha Ray, and Andrei Kolesnikov, “Self-Healing Polymeric Composite Material Design, Failure Analysis and Future Outlook: A Review,” Polymers, vol. 9, no. 10, pp. 535, 2017. View at Publisher · View at Google Scholar
  • Alemu Moges Belay, and Olav Torp, “Do Longer Projects Have Larger Cost Deviation Than Shorter Construction Projects?,” Procedia Engineering, vol. 196, pp. 262–269, 2017. View at Publisher · View at Google Scholar
  • Fernanda Justin Chaves, Patricia Tzortzopoulos, Carlos Torres Formoso, and Clarissa Notariano Biotto, “Building information modelling to cut disruption in housing retrofit,” Proceedings of the Institution of Civil Engineers - Engineering Sustainability, vol. 170, no. 6, pp. 322–333, 2017. View at Publisher · View at Google Scholar
  • Won-Hee Kang, Rakul Bharatwaj Ramesh, Olivia Mirza, Sepani Senaratne, Vivian Tam, and Dane Wigg, “Reliability Based Design of RC Beams With Recycled Aggregate and Steel Fibres,” Structures, 2017. View at Publisher · View at Google Scholar
  • Mohamed Marzouk, Mohamed El-zayat, and Ahmed Aboushady, “Assessing Environmental Impact Indicators in Road Construction Projects in Developing Countries,” Sustainability, vol. 9, no. 5, pp. 843, 2017. View at Publisher · View at Google Scholar
  • Mohannad Sabry, Maged Al Mandalawi, and Mays Sabry, “Shrinkage Module of Soil Samples with Different Cement Content,” The Open Access Journal of Science and Technology, vol. 5, 2017. View at Publisher · View at Google Scholar
  • James Odeck, “Variation in cost overruns of transportation projects: an econometric meta-regression analysis of studies reported in the literature,” Transportation, 2017. View at Publisher · View at Google Scholar
  • Zahra Pezeshki, and Syed Ali Soleimani Ivari, “Applications of BIM: A Brief Review and Future Outline,” Archives of Computational Methods in Engineering, 2016. View at Publisher · View at Google Scholar
  • G.E. Marjaba, and S.E. Chidiac, “Sustainability and resiliency metrics for buildings – Critical review,” Building and Environment, 2016. View at Publisher · View at Google Scholar
  • Kasun Nandapala, Rangika Halwatura, and Raja Rizwan Hussain, “Design of a durable roof slab insulation system for tropical climatic conditions,” Cogent Engineering, vol. 3, no. 1, pp. 1196526, 2016. View at Publisher · View at Google Scholar
  • Zenonas Turskis, Alfonsas Daniūnas, Edmundas Kazimieras Zavadskas, and Jurgis Medzvieckas, “Multicriteria Evaluation of Building Foundation Alternatives,” Computer-Aided Civil and Infrastructure Engineering, 2016. View at Publisher · View at Google Scholar
  • Sherif Mostafa, Nicholas Chileshe, and Tariq Abdelhamid, “Lean and agile integration within offsite construction using discrete event simulation,” Construction Innovation, vol. 16, no. 4, pp. 483–525, 2016. View at Publisher · View at Google Scholar
  • Madhuri Siddula, Fei Dai, Yanfang Ye, and Jianping Fan, “Classifying construction site photos for roof detection,” Construction Innovation, vol. 16, no. 3, pp. 368–389, 2016. View at Publisher · View at Google Scholar
  • Rodolfo Reyes, Waldo Bustamante, Jorge Gironás, Pablo A. Pastén, Victoria Rojas, Francisco Suárez, Sergio Vera, Felipe Victorero, and Carlos A. Bonilla, “Effect of substrate depth and roof layers on green roof temperature and water requirements in a semi-arid climate,” Ecological Engineering, vol. 97, pp. 624–632, 2016. View at Publisher · View at Google Scholar
  • Bernardette Soust-Verdaguer, Carmen Llatas, and Antonio García-Martínez, “Critical Review Of Bim-Based Lca Method To Buildings,” Energy and Buildings, 2016. View at Publisher · View at Google Scholar
  • Chao Mao, Fangyun Xie, Lei Hou, Peng Wu, Jun Wang, and Xiangyu Wang, “Cost analysis for sustainable off-site construction based on a multiple-case study in China,” Habitat International, vol. 57, pp. 215–222, 2016. View at Publisher · View at Google Scholar
  • Oz Sahin, Dane Miller, and Sherif Mohamed, “Value-based modelling: an Australian case of off-site manufactured buildings,” International Journal of Construction Management, pp. 1–19, 2016. View at Publisher · View at Google Scholar
  • Christos Ellinas, Neil Allan, and Anders Johansson, “Project systemic risk: Application examples of a network model,” International Journal of Production Economics, vol. 182, pp. 50–62, 2016. View at Publisher · View at Google Scholar
  • Roberto Barbosa dos Santos, and Antônio Edésio Jungles, “Risk Level Assessment in Construction Projects Using the Schedule Performance Index,” Journal of Construction Engineering, vol. 2016, pp. 1–8, 2016. View at Publisher · View at Google Scholar
  • Malik M. A. Khalfan, and Tayyab Maqsood, “Corrigendum to “Current State of Off-Site Manufacturing in Australian and Chinese Residential Construction”,” Journal of Construction Engineering, vol. 2016, pp. 1–1, 2016. View at Publisher · View at Google Scholar
  • Reshma Rughooputh, Jaylina Oogarah Rana, and Kishan Joorawon, “Possibility of using fresh concrete waste in concrete for non structural civil engineering works as a waste management strategy,” KSCE Journal of Civil Engineering, vol. 21, no. 1, pp. 94–99, 2016. View at Publisher · View at Google Scholar
  • Paula van Dommelen, Jennifer K. Coffeng, Hidde P. van der Ploeg, Allard J. van der Beek, Cecile R. L. Boot, and Ingrid J. M. Hendriksen, “Objectively Measured Total and Occupational Sedentary Time in Three Work Settings,” Plos One, vol. 11, no. 3, 2016. View at Publisher · View at Google Scholar
  • Anca-Andreea Balog, Nicoleta Cobîrzan, Ramona-Crina Suciu, Emilia Moşonyi, and Claudiu Aciu, “Mineralogical Assessment Regarding the Sustainability of Mortars Exposed to Sodium Sulfate Attack,” Procedia Technology, vol. 22, pp. 298–303, 2016. View at Publisher · View at Google Scholar
  • Jesus G. Gonzalez, Sumit Gupta, and Kenneth J. Loh, “Multifunctional Cement Composites Enhanced With Carbon Nanotube Thin Film Interfaces,” Proceedings of the IEEE, vol. 104, no. 8, pp. 1547–1560, 2016. View at Publisher · View at Google Scholar
  • Piotr Owerko, and Marcin Honkisz, “Innovative technique for identification of prestressing tendons layout in post-tensioned bridges using a probe with MEMS accelerometer,” Structure and Infrastructure Engineering, pp. 1–13, 2016. View at Publisher · View at Google Scholar
  • Uven Chong, and Omar Hopkins, “An international experience on the evolution of road costs during the project life cycle,” Transport Policy, vol. 48, pp. 60–66, 2016. View at Publisher · View at Google Scholar
  • Nhat-Duc Hoang, Quoc-Lam Nguyen, and Quang-Nhat Pham, “Optimizing Construction Project Labor Utilization Using Differential Evolution: A Comparative Study of Mutation Strategies,” Advances in Civil Engineering, vol. 2015, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  • Paul John Kulemeka, Grant Kululanga, and Danny Morton, “Critical Factors Inhibiting Performance of Small- and Medium-Scale Contractors in Sub-Saharan Region: A Case for Malawi,” Journal of Construction Engineering, vol. 2015, pp. 1–17, 2015. View at Publisher · View at Google Scholar
  • Min-Yuan Cheng, and Nhat-Duc Hoang, “Typhoon-induced slope collapse assessment using a novel bee colony optimized support vector classifier,” Natural Hazards, 2015. View at Publisher · View at Google Scholar
  • Adam Abderisak, and Göran Lindahl, “Take a Chance on Me? Construction Client's Perspectives on Risk Management,” Procedia Economics and Finance, vol. 21, pp. 548–554, 2015. View at Publisher · View at Google Scholar
  • Rasa Apanaviciene, Ala Daugeliene, Tautvydas Baltramonaitis, and Vida Maliene, “Sustainability Aspects of Real Estate Development: Lithuanian Case Study of Sports and Entertainment Arenas,” Sustainability, vol. 7, no. 6, pp. 6497–6522, 2015. View at Publisher · View at Google Scholar
  • Farzad Jalaei, and Ahmad Jrade, “Integrating Building Information Modeling (BIM) and LEED System at the Conceptual Design Stage of Sustainable Buildings,” Sustainable Cities and Society, 2015. View at Publisher · View at Google Scholar
  • A. Hemalatha, N. Mahendran, and G. Ganesh Prabhu, “Prediction of Effects of Geogrid Reinforced Granular Fill on the Behaviour of Static Liquefaction,” Advances in Materials Science and Engineering, vol. 2014, pp. 1–11, 2014. View at Publisher · View at Google Scholar
  • Nhat-Duc Hoang, Anh-Duc Pham, and Minh-Tu Cao, “A Novel Time Series Prediction Approach Based on a Hybridization of Least Squares Support Vector Regression and Swarm Intelligence,” Applied Computational Intelligence and Soft Computing, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Grace Tiberio Cardoso, and Francisco Vecchia, “Comparison of thermal performance between test cells with different coverage systems for experimental typical day of heat in Brazilian Southeastern,” Frontiers of Architectural Research, 2014. View at Publisher · View at Google Scholar
  • Nhat-Duc Hoang, “NIDE: A Novel Improved Differential Evolution for Construction Project Crashing Optimization,” Journal of Construction Engineering, vol. 2014, pp. 1–7, 2014. View at Publisher · View at Google Scholar
  • Sanjeev Kumar Verma, Sudhir Singh Bhadauria, and Saleem Akhtar, “Monitoring Corrosion of Steel Bars in Reinforced Concrete Structures,” The Scientific World Journal, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar