Table of Contents
Journal of Computational Engineering
Volume 2013, Article ID 868252, 13 pages
http://dx.doi.org/10.1155/2013/868252
Research Article

Three-Dimensional Mathematical Investigation of Dynamic and Hydrostatic Pressure Distributions on Planing Hulls

Department of Marine Technology, Amirkabir University of Technology, Hafez Avenue, No. 424, P.O. Box 15875-4413, Tehran, Iran

Received 15 May 2013; Accepted 27 July 2013

Academic Editor: Jia-Jang Wu

Copyright © 2013 Parviz Ghadimi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. J. Kapryan and G. M. Boyd, “Hydrodynamic pressure distribution obtained during a planing investigation of five related prismatic surfaces,” NACA Technical Note, 1955. View at Google Scholar
  2. R. F. Smiley, “A study of water pressure distribution during landing with special reference to a prismatic model having a heavy loading and a 30-degree angle of deadrise,” NACA Translation, 1950. View at Google Scholar
  3. R. F. Smiley, “An experimental study of the water-pressure distributions during landing and planing of a heavily loaded rectangular flat-plate model,” NACA Technical Note 2453, 1951. View at Google Scholar
  4. H. Wagner, “Phenomena associated with impacts and sliding on liquid surfaces,” NACA Translation, 1932. View at Google Scholar
  5. D. Savitsky, Hydrodynamic Design of Planing Hulls, vol. 1, Marine Technology, 1964.
  6. J. F. Wellicome and Y. M. Jahangeer, “The prediction of pressure loads on planing hulls in calm water,” Royal Institution of Naval Architects, no. 2, pp. 53–70, 1978. View at Google Scholar
  7. P. Ghadimi, A. Dashtimanesh, M. Farsi, and S. Najafi, “Investigation of free surface flow generated by a planing flat plate using smoothed particle hydrodynamics method and FLOW3D simulations,” Journal of Engineering Maritime Environment, 2012. View at Publisher · View at Google Scholar
  8. D. Savitsky, M. F. DeLorme, and R. Datla, “Inclusion of whisker spray drag in performance prediction method for high-speed planing hulls,” Marine Technology, vol. 44, no. 1, pp. 35–56, 2007. View at Google Scholar · View at Scopus
  9. M. G. Morabito, On the spray and bottom pressures of planing surfaces [Ph.D. thesis], Stevens Institute of Technology, 2010.
  10. W. Sottorf, “Experiments with planing surfaces,” NACA Translation, 1934. View at Google Scholar
  11. J. D. Pierson and S. Leshnover, “A study of the flow, pressure and loads pertaining to prismatic vee-planing surfaces,” Report SIT DL 50382, Davison Laboratory, 1950. View at Google Scholar
  12. B. V. Korvin-Kroukovsky and F. R. Cahbrow, “The discontinuous fluid flow past an immersed wedge,” S.M.F Fund Paper 167, Institute of Aeronautical Science, 1948. View at Google Scholar
  13. M. White Frank, Fluid Mechanics, chapter 2, McGrowHill, 4th edition, 1998.
  14. C. L. Shuford, “A theoretical and experimental study of planing surfaces including effects of cross section and plan form,” NACA Technical Note 3939, 1957. View at Google Scholar