Table of Contents
Journal of Ceramics
Volume 2014 (2014), Article ID 874034, 10 pages
http://dx.doi.org/10.1155/2014/874034
Research Article

Durability Modeling of Environmental Barrier Coating (EBC) Using Finite Element Based Progressive Failure Analysis

1NASA Glenn Research Center, Cleveland, OH 44135, USA
2AlphaSTAR Corporation, Long Beach, CA 90804, USA

Received 28 October 2013; Accepted 14 January 2014; Published 9 April 2014

Academic Editor: Guillaume Bernard-Granger

Copyright © 2014 Ali Abdul-Aziz et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Abdul-Aziz, G. Abumeri, W. Troha, R. T. Bhatt, J. E. Grady, and D. Zhu, “Environmental barrier coating (EBC) durability modeling using a progressive failure analysis approach,” in Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, Behavior and Mechanics of Multifunctional and Composite Materials, vol. 8346 of Proceedings of SPIE, San Diego, Calif, USA, March 2012. View at Publisher · View at Google Scholar
  2. K. N. Lee, D. S. Fox, R. C. Robinson, and N. P. Bansal, “Environmental barrier coatings for silicon-based ceramics,” in High Temperature Ceramic Matrix Composites, W. Krenkel, R. Naslain, and H. Schneider, Eds., pp. 224–229, Wiley-Vch, Weinheim, Germany, 2001. View at Publisher · View at Google Scholar
  3. P. J. Jorgensen, M. E. Wadsworth, and I. B. Cutler, “Oxidation of silicon carbide,” Journal of the American Ceramic Society, vol. 42, no. 12, pp. 613–616, 1959. View at Publisher · View at Google Scholar
  4. J. L. Smialek, R. C. Robinson, E. J. Opila, D. S. Fox, and N. S. Jacobson, “SiC and Si3N4 recession due to SiO2 scale volatility under combustor conditions,” Advanced Composite Materials, vol. 8, no. 1, pp. 33–45, 1999. View at Google Scholar · View at Scopus
  5. K. L. More, P. F. Tortorelli, and L. R. Walker, “Effects of high water vapor pressures on the oxidation of SiC-based fiber-reinforced composites,” Materials Science Forum, vol. 369—372, pp. 385–394, 2001. View at Google Scholar · View at Scopus
  6. K. L. More, P. F. Tortorelli, L. R. Walker, N. Miriyala, J. R. Price, and M. Van Roode, “High-temperature stability of SiC-based composites in high-water-vapor-pressure environments,” Journal of the American Ceramic Society, vol. 86, no. 8, pp. 1272–1281, 2003. View at Google Scholar · View at Scopus
  7. K. N. Lee, “Current status of environmental barrier coatings for Si-based ceramics,” Surface and Coatings Technology, vol. 133-134, pp. 1–7, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. D. M. Zhu, R. A. Miller, and D. S. Fox, “Thermal and environmental barrier coating development for advanced propulsion engine systems,” NASA TM-2008-215040, 2008. View at Google Scholar
  9. D. M. Zhu, N. P. Bansal, and R. A. Miller, “Thermal conductivity and stability of HfO2-Y2O3 and La2Zr2O7 evaluated for 1650°C,” in Advances in Ceramic Matrix Composites, N. P. Bansal, J. P. Singh, W. M. Kriven, and H. Schnneider, Eds., John Wiley & Sons, Hoboken, NJ, USA. View at Publisher · View at Google Scholar
  10. D. Zhu and R. A. Miller, “Thermal conductivity and elastic modulus evolution of thermal barrier coatings under high heat flux conditions,” Journal of Thermal Spray Technology, vol. 9, no. 2, pp. 175–180, 2000. View at Google Scholar · View at Scopus
  11. S. Ochiai, S. Kimura, H. Tanaka et al., “Degradation of SiC/SiC composite due to exposure at high temperatures in vacuum in comparison with that in air,” Composites A: Applied Science and Manufacturing, vol. 35, no. 1, pp. 33–40, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. M. van Roode, A. K. Bhattacharya, M. K. Ferber, and F. Abdi, “Creep resistance and water vapor degradation of sic/sic ceramic matrix composite gas turbine hot section components,” in ASME Turbo Expo 2010: Power for Land, Sea, and Air, pp. 455–469, June 2010. View at Scopus
  13. A. Abdul-Aziz and R. T. Bhatt, “Modeling of thermal residual stress in environmental barrier coated fiber reinforced ceramic matrix composites,” Journal of Composite Materials, 2011. View at Publisher · View at Google Scholar
  14. M. Garg, G. H. Abumeri, and D. Huang, “Predicting failure design envelop for composite material system using finite element and progressive failure analysis approach,” in Proceedings of the 52nd International SAMPE Symposium: Material and Process Innovations: Changing our World (SAMPE '08), May 2008. View at Scopus
  15. F. Abdi, Z. Qian, and M. Lee, The Premature Failure of 3D Woven Composites, ACMA Composites, Columbus, Ohio, USA, 2005.
  16. “GENOA durability and damage tolerance and life prediction software,” AlphaSTAR Corporation, Long Beach, Calif, USA, http://www.ascgenoa.com.
  17. “Abaqus commercial finite element code,” Providence, RI, USA, 2909—2499.
  18. “MCQ software,” AlphaSTAR Corp, Long Beach, Calif, USA, 2012.