Hasmukh S. Patel, Kumar K. Panchal, "Interacting Blends of Novel Unsaturated Polyester Amide Resin with Styrene", Journal of Chemistry, vol. 1, Article ID 521631, 6 pages, 2004. https://doi.org/10.1155/2004/521631
Interacting Blends of Novel Unsaturated Polyester Amide Resin with Styrene
Novel unsaturated poly (ester-amide) resins (UPEAs) were prepared by the reaction between an epoxy resin, namely diglycidyl ether of bisphenol–A (DGEBA) and unsaturated aliphatic bisamic acids using a base catalyst. These UPEAs were then blended with a vinyl monomer namely, Styrene (STY.) to produce a homogeneous resin syrup. The curing of these UPEAs-STY. resin blends was carried out by using benzoyl peroxide (BPO) as a catalyst and was monitored by using a differential scanning calorimeter (DSC). The glass fibre reinforced composites (i.e. laminates) of these UPEA-STY. resin blends were fabricated using the DSC data. The chemical, mechanical and electrical properties of the glass fibre composites have also been evaluated. The unreinforced cured samples of the UPEA-STY. resin blends were also analyzed by thermogravimetry (TGA).
Copyright © 2004 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.