Table of Contents Author Guidelines Submit a Manuscript
E-Journal of Chemistry
Volume 3, Issue 4, Pages 186-201
http://dx.doi.org/10.1155/2006/860413
Review Article

Polypyrrole Conducting Electroactive Polymers: Synthesis and Stability Studies

Reza Ansari

Chemistry Department, Faculty of Science, Guilan University, Rasht, POB: 41335-1914, Iran

Received 14 April 2006; Accepted 1 June 2006

Copyright © 2006 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [103 citations]

The following is the list of published articles that have cited the current article.

  • R. Ansari, Ali F. Delavar, and J. Feizy, “Removal of Arsenic Ions from Aqueous Solutions Using Conducting Polymers,” E-Journal Of Chemistry, vol. 5, no. 4, pp. 853–863, 2008. View at Publisher · View at Google Scholar
  • J Wang Jing, Lh Li Lihua, Jt Zhou Jiti, H Lu Hong, Gf Lu Guangfei, Rf Jin Ruofei, and Fl Yang Fenglin, “Enhanced biodecolorization of azo dyes by electropolymerization-immobilized redox mediator,” Journal Of Hazardous Materials, vol. 168, no. 2-3, pp. 1098–1104, 2009. View at Publisher · View at Google Scholar
  • Reza Ansari, and A. Fallah Delavar, “Application of Poly 3-methylthiophene for Removal of Silver Ion from Aqueous Solutions,” Journal Of Applied Polymer Science, vol. 113, no. 4, pp. 2293–2300, 2009. View at Publisher · View at Google Scholar
  • Shivaji A. Jamadade, and Vijaya Puri, “Properties of electropolymerised polypyrrole thin film on silver,” Applied Surface Science, vol. 255, no. 19, pp. 8281–8285, 2009. View at Publisher · View at Google Scholar
  • Wendy van Zoelen, Sasa Bondzic, Tatiana Fernandez Landaluce, Johan Brondijk, Katja Loos, Arend-Jan Schouten, Petra Rudolf, and Gerrit ten Brinke, “Nanostructured polystyrene-block-poly(4-vinyl pyridine)(pentadecylphenol) thin films as templates for polypyrrole synthesis,” Polymer, vol. 50, no. 15, pp. 3617–3625, 2009. View at Publisher · View at Google Scholar
  • Hung-Te Chang, and Hsun-Tsing Lee, “Synthesis and Properties of Poly(4,8-dialkoxy-1,5-naphthalenevinylene)s,” Journal of Macromolecular Science, Part A, vol. 46, no. 7, pp. 722–726, 2009. View at Publisher · View at Google Scholar
  • Lynne A. McCullough, Bruno Dufour, and Krzysztof Matyjaszewski, “Polyaniline and Polypyrrole Templated on Self-Assembled Acidic Block Copolymers,” Macromolecules, vol. 42, no. 21, pp. 8129–8137, 2009. View at Publisher · View at Google Scholar
  • Sufia Hena, “Removal of chromium hexavalent ion from aqueous solutions using biopolymer chitosan coated with poly 3-methyl thiophene polymer,” Journal Of Hazardous Materials, vol. 181, no. 1-3, pp. 474–479, 2010. View at Publisher · View at Google Scholar
  • Reza Ansari, and Ali Fallah Delavar, “Removal of Cr(VI) Ions from Aqueous Solutions Using Poly 3-Methyl Thiophene Conducting Electroactive Polymers,” Journal Of Polymers And The Environment, vol. 18, no. 3, pp. 202–207, 2010. View at Publisher · View at Google Scholar
  • Jian Li, Xue-ren Qian, Jing-huan Chen, Chun-yue Ding, and Xian-hui An, “Conductivity decay of cellulose-polypyrrole conductive paper composite prepared by in situ polymerization method,” Carbohydrate Polymers, vol. 82, no. 2, pp. 504–509, 2010. View at Publisher · View at Google Scholar
  • Yafei Dai, and Estela Blaisten-Barojas, “Monte Carlo study of oligopyrroles in condensed phases,” Journal Of Chemical Physics, vol. 133, no. 3, 2010. View at Publisher · View at Google Scholar
  • Z. Mosayebzadeh, and R. Ansari, “Removal of Basic Dye Methylene Blue from Aqueous Solutions Using Sawdust an d Sawdust Coated with Polypyrrole,” Journal Of The Iranian Chemical Society, vol. 7, no. 2, pp. 339–350, 2010. View at Publisher · View at Google Scholar
  • Chunyue Ding, Xueren Qian, Gang Yu, and Xianhui An, “Dopant effect and characterization of polypyrrole-cellulose composites prepared by in situ polymerization process,” Cellulose, vol. 17, no. 6, pp. 1067–1077, 2010. View at Publisher · View at Google Scholar
  • Shubhra Goel, Nasreen A. Mazumdar, and Alka Gupta, “Synthesis and characterization of poly (indene-co-pyrrole) nanofibers,” Polymers For Advanced Technologies, vol. 21, no. 12, pp. 888–895, 2010. View at Publisher · View at Google Scholar
  • Ram Mahloniya, J. Bajpai, and A. K. Bajpai, “Novel Synthesis of Polypyrrole Reinforced Nanocomposites and Evaluation of Water Uptake and Blood Compatible Behaviors,” Journal of Macromolecular Science, Part A, vol. 48, no. 1, pp. 9–20, 2010. View at Publisher · View at Google Scholar
  • M. Aghaie, H. Aghaie, M. Banimahd Keivani, M. Monajjemi, and K. Zare, “Synthesis of Nano Conducting Polymer Based Polyaniline and it's Composite: Mechanical Properties, Conductivity and Thermal Studies,” E-Journal Of Chemistry, vol. 7, no. 1, pp. 105–110, 2010. View at Publisher · View at Google Scholar
  • Reza Ansari, and Amin Pornahad, “Removal of Ce(IV) Ions from Aqueous Solutions Using Sawdust Coated by Electroactive Polymers,” Separation Science And Technology, vol. 45, no. 16, pp. 2376–2382, 2010. View at Publisher · View at Google Scholar
  • D. P. Dubal, S. V. Patil, and W. B. Kim, “Supercapacitors based on electrochemically deposited polypyrrole nanobricks,” Materials Letters, vol. 65, no. 17-18, pp. 2628–2631, 2011. View at Publisher · View at Google Scholar
  • Sajeela Awasthi, Alok Srivastava, and M. L. Singla, “Voltammetric determination of citric acid and quinine hydrochloride using polypyrrole-pentacyanonitrosylferrate/platinum electrode,” Synthetic Metals, vol. 161, no. 15-16, pp. 1707–1712, 2011. View at Publisher · View at Google Scholar
  • D. P. Dubal, S. V. Patil, A. D. Jagadale, and C. D. Lokhande, “Two step novel chemical synthesis of polypyrrole nanoplates for supercapacitor application,” Journal Of Alloys And Compounds, vol. 509, no. 32, pp. 8183–8188, 2011. View at Publisher · View at Google Scholar
  • Yafei Dai, Sugata Chowdhury, and Estela Blaisten-Barojas, “Density Functional Theory Study of the Structure and Energetics of Negatively Charged Oligopyrroles,” International Journal Of Quantum Chemistry, vol. 111, no. 10, pp. 2295–2305, 2011. View at Publisher · View at Google Scholar
  • Arun S. Prasad, M. S. Dhawan, S. N. Dolia, Arvind Samariya, V. R. Reddy, R. K. Singhal, and P. Predeep, “MAGNETIC BEHAVIOR OF FUNCTIONALLY MODIFIED SPINEL Ni0.4Ca0.6Fe2O4 NANOFERRITE,” International Journal Of Modern Physics B, vol. 25, no. 14, pp. 1971–1980, 2011. View at Publisher · View at Google Scholar
  • M. Braiek, H. Barhoumi, A. Maaref, and N. Jaffrezic-Renault, “Elaboration and Characterization of pH Sensor Based on Polypyrrole Nanowires,” Sensor Letters, vol. 9, no. 6, pp. 2154–2157, 2011. View at Publisher · View at Google Scholar
  • Mahnaz M. Abdi, H. N. M. Ekramul Mahmud, Luqman Chuah Abdullah, Anuar Kassim, Mohamad Zaki Ab. Rahman, and Josephine Liew Ying Chyi, “Optical band gap and conductivity measurements of polypyrrole-chitosan composite thin films,” Chinese Journal of Polymer Science, vol. 30, no. 1, pp. 93–100, 2011. View at Publisher · View at Google Scholar
  • Alexandra Palla-Papavlu, Valentina Dinca, Maria Dinescu, Fabio Di Pietrantonio, Domenico Cannata, Massimiliano Benetti, and Enrico Verona, “Matrix-assisted pulsed laser evaporation of chemoselective polymers,” Applied Physics A-Materials Science & Processing, vol. 105, no. 3, pp. 651–659, 2011. View at Publisher · View at Google Scholar
  • Akif Kaynak, Chunhui Yang, Yang C. Lim, and Abbas Kouzani, “Electrochemical fabrication and modelling of mechanical behavior of a tri-layer polymer actuator,” Materials Chemistry And Physics, vol. 125, no. 1-2, pp. 113–117, 2011. View at Publisher · View at Google Scholar
  • Hemant K. Chitte, Ganesh N. Shinde, Narendra V. Bhat, and Vasant E. Walunj, “Synthesis of Polypyrrole Using Ferric Chloride (FeCl<sub>3</sub>) as Oxidant Together with Some Dopants for Use in Gas Sensors,” Journal of Sensor Technology, vol. 01, no. 02, pp. 47–56, 2011. View at Publisher · View at Google Scholar
  • Hemant K. Chitte, Narendra V. Bhat, Mr. Ajit V. Gore, and Ganesh N. Shind, “Synthesis of Polypyrrole Using Ammonium Peroxy Disulfate (APS) as Oxidant Together with Some Dopants for Use in Gas Sensors,” Materials Sciences and Applications, vol. 02, no. 10, pp. 1491–1498, 2011. View at Publisher · View at Google Scholar
  • Azam Rashidzadeh, Ali Olad, and Shirin Ahmadi, “Preparation and characterization of polypyrrole/clinoptilolite nanocomposite with enhanced electrical conductivity by surface polymerization method,” Polymer Engineering & Science, vol. 53, no. 5, pp. 970–975, 2012. View at Publisher · View at Google Scholar
  • Samaneh Mozaffari, Mohammad Reza Nateghi, Abbas Behjat, and Mahmood Borhani-Zarandi, “Effects of dopants and copolymerization on Schottky barriers of polypyrrole and polyindole/metal interfaces,” Iranian Polymer Journal, vol. 21, no. 11, pp. 799–808, 2012. View at Publisher · View at Google Scholar
  • Yu Lei, Xueren Qian, Jing Shen, and Xianhui An, “Integrated Reductive/Adsorptive Detoxification of Cr(VI)-Contaminated Water by Polypyrrole/Cellulose Fiber Composite,” Industrial & Engineering Chemistry Research, vol. 51, no. 31, pp. 10408–10415, 2012. View at Publisher · View at Google Scholar
  • Reza Ansari, Ali Fallah Delavar, and Ali Mohammad-khah, “Solid-state ion selective electrode based on polypyrrole conducting polymer nanofilm as a new potentiometric sensor for Zn2+ ion,” Journal of Solid State Electrochemistry, vol. 16, no. 10, pp. 3315–3322, 2012. View at Publisher · View at Google Scholar
  • Reza Ansari, Ali Fallah Delavar, and Ali Mohammad-khah, “A solid state Cr(VI) ion-selective electrode based on polypyrrole,” Microchimica Acta, vol. 178, no. 1-2, pp. 71–79, 2012. View at Publisher · View at Google Scholar
  • Arun S. Prasad, S. N. Dolia, M. S. Dhawan, S. Kumar, and V. R. Reddy, “Synthesis, Structural and Magnetic Properties of Polypyrrole Coated Ni0.2Ca0.8Fe2O4 Nanocomposite,” Journal of Superconductivity and Novel Magnetism, vol. 25, no. 6, pp. 1921–1927, 2012. View at Publisher · View at Google Scholar
  • M. Marandi, S. Kallip, L. Matisen, J. Tamm, and V. Sammelselg, “Formation of nanometric polypyrrole films on Au (111): A STM, SEM and XPS study,” Synthetic Metals, vol. 162, no. 1-2, pp. 162–170, 2012. View at Publisher · View at Google Scholar
  • Fulya Memioglu, Ayse Bayrakçeken, Tuba Öznülüer, and Metin Ak, “Synthesis and characterization of polypyrrole/carbon composite as a catalyst support for fuel cell applications,” International Journal of Hydrogen Energy, vol. 37, no. 21, pp. 16673–16679, 2012. View at Publisher · View at Google Scholar
  • Naima Maouche, Mounia Guergouri, Sarra Gam-Derouich, Mohamed Jouini, Belkacem Nessark, and Mohamed M. Chehimi, “Molecularly imprinted polypyrrole films: Some key parameters for electrochemical picomolar detection of dopamine,” Journal Of Electroanalytical Chemistry, vol. 685, pp. 21–27, 2012. View at Publisher · View at Google Scholar
  • Céline Vervacke, Carlos Cesar Bof Bufon, Dominic J. Thurmer, Pablo F. Siles, and Oliver G. Schmidt, “High-Performance Organic Nanomembrane Based Sensors for Rapid in Situ Acid Detection,” Analytical Chemistry, vol. 84, no. 19, pp. 8399–8406, 2012. View at Publisher · View at Google Scholar
  • Mohammad Hossein Arbab Zavar, Somayeh Heydari, and Gholam Hossein Rounaghi, “The response behavior of PPy-DB18C6 electrode to terbium(III) in acetonitrile and its thermodynamic application,” Arabian Journal of Chemistry, 2012. View at Publisher · View at Google Scholar
  • Mogeli Sh. Khubutiya, Aslan Yu. Tsivadze, Guzel R. Garaeva, Vladimir N. Andreev, and Mark M. Goldin, “Adsorption of Free Hemoglobin by Electrochemically Modified Activated Carbons. Part 1. Aqueous Solutions,” Macroheterocycles, vol. 5, no. 4-5, pp. 321–326, 2012. View at Publisher · View at Google Scholar
  • Amin Imani, Gholamali Farzi, and Adnen Ltaief, “Facile synthesis and characterization of polypyrrole-multiwalled carbon nanotubes by in situ oxidative polymerization,” International Nano Letters, vol. 3, no. 1, 2013. View at Publisher · View at Google Scholar
  • Mihaela Mindroiu, Camelia Ungureanu, Raluca Ion, and Cristian Pirvu, “The effect of deposition electrolyte on polypyrrole surface interaction with biological environment,” Applied Surface Science, vol. 276, pp. 401–410, 2013. View at Publisher · View at Google Scholar
  • Viness Pillay, Tong-Sheng Tsai, Yahya E. Choonara, Lisa C. du Toit, Pradeep Kumar, Girish Modi, Dinesh Naidoo, Lomas K. Tomar, Charu Tyagi, and Valence M. K. Ndesendo, “A review of integrating electroactive polymers as responsive systems for specialized drug delivery applications,” Journal of Biomedical Materials Research Part A, 2013. View at Publisher · View at Google Scholar
  • Yang Tan, “Kinetics and mechanism of pyrrole chemical polymerization,” Synthetic Metals, vol. 175, pp. 183–191, 2013. View at Publisher · View at Google Scholar
  • Junjing Li, Huiling Liu, Xiuwen Cheng, Qinghua Chen, Yanjun Xin, Zhenpeng Ma, Wenxian Xu, Jun Ma, and Nanqi Ren, “Preparation and characterization of palladium/polypyrrole/foam nickel electrode for electrocatalytic hydrodechlorination,” Chemical Engineering Journal, vol. 225, pp. 489–498, 2013. View at Publisher · View at Google Scholar
  • Leo Y. Zheng, Robert B. Congdon, Omowunmi A. Sadik, Cláudia N.H. Marques, David G. Davies, Bahgat G. Sammakia, Leann M. Lesperance, and James N. Turner, “Electrochemical measurements of biofilm development using polypyrrole enhanced flexible sensors,” Sensors and Actuators B: Chemical, vol. 182, pp. 725–732, 2013. View at Publisher · View at Google Scholar
  • Bakhshali Massoumi, Sona Esmailzadeh Afshar, Soghra Fathalipour, Robab Mohammadi, and Ali Akbar Entezami, “Novel conducting polySchiff base of N-(3-aminopropyl) pyrrole-salicylaldehyde and its copolymers with pyrrole: synthesis and characterization,” Designed Monomers and Polymers, vol. 16, no. 3, pp. 263–273, 2013. View at Publisher · View at Google Scholar
  • K. Firoz Babu, S.P. Siva Subramanian, and M. Anbu Kulandainathan, “Functionalisation of fabrics with conducting polymer for tuning capacitance and fabrication of supercapacitor,” Carbohydrate Polymers, vol. 94, no. 1, pp. 487–495, 2013. View at Publisher · View at Google Scholar
  • Mihaela Mindroiu, Raluca Ion, Cristian Pirvu, and Anisoara Cimpean, “Surfactant-dependent macrophage response to polypyrrole-based coatings electrodeposited on Ti6Al7Nb alloy,” Materials Science and Engineering: C, 2013. View at Publisher · View at Google Scholar
  • Daniel O. Carlsson, Martin Sjödin, Leif Nyholm, and Maria Strømme, “A Comparative Study of the Effects of Rinsing and Aging of Polypyrrole/Nanocellulose Composites on Their Electrochemical Properties,” The Journal of Physical Chemistry B, vol. 117, no. 14, pp. 3900–3910, 2013. View at Publisher · View at Google Scholar
  • Tsubasa Takano, Aya Mikazuki, and Takaomi Kobayashi, “Conductive polypyrrole composite films prepared using wet cast technique with a pyrrole-cellulose acetate solution,” Polymer Engineering & Science, 2013. View at Publisher · View at Google Scholar
  • Mehrdad Gholami, Abdol-Majid Ghasemi, Mohammad M. Loghavi, Shima Behkami, and Amaneh Ahamdi-Dokht-Faraghe, “Preparation of a miniaturised iodide ion selective sensor using polypyrrole and pencil lead: effect of double-coating, electropolymerisation time, and current density,” Chemical Papers, vol. 67, no. 8, pp. 1079–1086, 2013. View at Publisher · View at Google Scholar
  • Vinh Ho, Cheng Zhou, Lawrence Kulinsky, and Marc Madou, “Fabrication of 3D polypyrrole microstructures and their utilization as electrodes in supercapacitors,” Journal of Micromechanics and Microengineering, vol. 23, no. 12, 2013. View at Publisher · View at Google Scholar
  • Sarifah Fauziah S. Draman, Rusli Daik, Said M. El-Sheikh, and Famiza A. Latif, “Nanocomposites of cellulose-based adhesive and toluenesulfonic acid-doped polypyrrole prepared via colloidal dispersion,” Journal of Reinforced Plastics and Composites, vol. 32, no. 20, pp. 1553–1560, 2013. View at Publisher · View at Google Scholar
  • Fulya Memioğlu, Ayşe Bayrakçeken, Tuba Öznülüer, and Metin Ak, “Conducting carbon/polymer composites as a catalyst support for proton exchange membrane fuel cells,” International Journal of Energy Research, 2013. View at Publisher · View at Google Scholar
  • Suman Singh, D. V. S. Jain, and M. L. Singla, “One step electrochemical synthesis of gold-nanoparticles–polypyrrole composite for application in catechin electrochemical biosensor,” Analytical Methods, vol. 5, no. 4, pp. 1024, 2013. View at Publisher · View at Google Scholar
  • Robison Buitrago-Sierra, M. Jesús García-Fernández, M. Mercedes Pastor-Blas, and Antonio Sepúlveda-Escribano, “Environmentally friendly reduction of a platinum catalyst precursor supported on polypyrrole,” Green Chemistry, vol. 15, no. 7, pp. 1981, 2013. View at Publisher · View at Google Scholar
  • Victor H. Perez-Gonzalez, Vinh Ho, Lawrence Kulinsky, Marc Madou, and Sergio O. Martinez-Chapa, “PPyDEP: a new approach to microparticle manipulation employing polymer-based electrodes,” Lab on A Chip, vol. 13, no. 23, pp. 4642–4652, 2013. View at Publisher · View at Google Scholar
  • Bd Bui Dai Nhan, “Electrochemical synthesis of polypyrrole for biosensor application,” International Journal of Nanotechnology, vol. 10, no. 3-4, pp. 154–165, 2013. View at Publisher · View at Google Scholar
  • S.T. Navale, A.T. Mane, A.A. Ghanwat, A.R. Mulik, and V.B. Patil, “Camphor sulfonic acid (CSA) doped polypyrrole (PPy) films: Measurement of microstructural and optoelectronic properties,” Measurement, vol. 50, pp. 363–369, 2014. View at Publisher · View at Google Scholar
  • Robert Brooke, Drew Evans, Pejman Hojati-Talemi, Peter Murphy, and Manrico Fabretto, “Enhancing the morphology and electrochromic stability of polypyrrole via PEG–PPG–PEG templating in vapour phase polymerisation,” European Polymer Journal, vol. 51, pp. 28–36, 2014. View at Publisher · View at Google Scholar
  • Samuel Kassahun Mamo, and Jose Gonzalez-Rodriguez, “Development of a Molecularly Imprinted Polymer-Based Sensor for the Electrochemical Determination of Triacetone Triperoxide (TATP),” Sensors, vol. 14, no. 12, pp. 23269–23282, 2014. View at Publisher · View at Google Scholar
  • B. V. Chaluvaraju, S. K. Ganiger, and M. V. Murugendrappa, “Synthesis, characterization and D. C. conductivity studies of polypyrrole/molybdenum trioxide composites,” Polymer Science Series B, vol. 56, no. 6, pp. 935–939, 2014. View at Publisher · View at Google Scholar
  • Tae-Sun Jun, Sungho Lee, and Yong Shin Kim, “Fabrication of Methanol Sensors Using Conductive Polypyrrole Nanofibers with a Core-Shell Structure,” Journal of Sensor Science and Technology, vol. 23, no. 6, pp. 383–387, 2014. View at Publisher · View at Google Scholar
  • Salma Bilal, Shehna Farooq, Anwar-ul-Haq Ali Shah, and Rudolf Holze, “Improved solubility, conductivity, thermal stability and corrosion protection properties of poly(o-toluidine) synthesized via chemical polymerization,” Synthetic Metals, vol. 197, pp. 144–153, 2014. View at Publisher · View at Google Scholar
  • Jaehyun Hur, Kyuhyun Im, Sang Won Kim, Jineun Kim, Dae-Young Chung, Tae-Ho Kim, Kyoung Ho Jo, Jong Hoon Hahn, Zhenan Bao, Sungwoo Hwang, and Nokyoung Park, “Polypyrrole/Agarose-Based Electronically Conductive and Reversibly Restorable Hydrogel,” Acs Nano, vol. 8, no. 10, pp. 10066–10076, 2014. View at Publisher · View at Google Scholar
  • Namrata Gaikwad, Sreenu Bhanoth, Priyesh V. More, G. H. Jain, and P. K. Khanna, “Chemically designed Pt/PPy nano-composite for effective LPG gas sensor,” Nanoscale, vol. 6, no. 5, pp. 2746, 2014. View at Publisher · View at Google Scholar
  • Céline Vervacke, Carlos C. Bof Bufon, Dominic J. Thurmer, and Oliver G. Schmidt, “Three-dimensional chemical sensors based on rolled-up hybrid nanomembranes,” RSC Advances, vol. 4, no. 19, pp. 9723, 2014. View at Publisher · View at Google Scholar
  • Victor H Perez-Gonzalez, Vinh Ho, Matias Vazquez-Pinon, Sergio O Martinez-Chapa, and Lawrence Kulinsky, “A novel micro/nano fabrication process based on the combined use of dielectrophoresis, electroosmotic flow, and electrodeposition for surface patterning,” Journal of Micromechanics and Microengineering, vol. 25, no. 11, pp. 115007, 2015. View at Publisher · View at Google Scholar
  • Bingxi Yan, Boyi Li, Forest Kunecke, Zhen Gu, and Liang Guo, “Polypyrrole-Based Implantable Electroactive Pump for Controlled Drug Microinjection,” ACS Applied Materials & Interfaces, pp. 150707010030002, 2015. View at Publisher · View at Google Scholar
  • M. Sh. Zoromba, N. A. El-Ghamaz, and Samir Alghool, “Effect of Doping with Nickel Ions on the Electrical Properties of Poly(aniline-co-o-anthranilic acid) and Doped Copolymer as Precursor of NiO Nanopart,” Journal Of Inorganic And Organometallic Polymers And Materials, vol. 25, no. 4, pp. 955–963, 2015. View at Publisher · View at Google Scholar
  • Sarifah Fauziah Syed Draman, Rusli Daik, Said M. El-Sheikh, and Famiza Abdul Latif, “Thermally Conductive Adhesive from Chemically Modified Cellulose and Nanoparticle of Surfactant-Doped Polypyrrole,” Macromolecular Symposia, vol. 353, no. 1, pp. 24–30, 2015. View at Publisher · View at Google Scholar
  • Asta Kausaite-Minkstimiene, Viktor Mazeiko, Almira Ramanaviciene, and Arunas Ramanavicius, “Evaluation of chemical synthesis of polypyrrole particles,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2015. View at Publisher · View at Google Scholar
  • Susheel Kumar Singh, and R.K. Shukla, “Optical and photoconductivity properties of pure Polypyrrole and titanium dioxide-doped Polypyrrole nanocomposites,” Materials Science in Semiconductor Processing, vol. 31, pp. 245–250, 2015. View at Publisher · View at Google Scholar
  • Arunas Ramanavicius, Eivydas Andriukonis, Arunas Stirke, Lina Mikoliunaite, Zigmas Balevicius, and Almira Ramanaviciene, “Synthesis of Polypyrrole Within the Cell Wall of Yeast by Redox-Cycling of [Fe(CN)6]3−/[Fe(CN)6]4−,” Enzyme and Microbial Technology, 2015. View at Publisher · View at Google Scholar
  • Ali Davoodi, Saleheh Honarbakhsh, and Gholam Ali Farzi, “Evaluation of corrosion resistance of polypyrrole/functionalized multi-walled carbon nanotubes composite coatings on 60Cu–40Zn brass alloy,” Progress in Organic Coatings, vol. 88, pp. 106–115, 2015. View at Publisher · View at Google Scholar
  • Silvana Asmussen, Gustavo Arenas, and Claudia Vallo, “Photopolymerization of pyrrole/methacrylate mixtures using α-cleavage type photoinitiators in combination with iodonium salt,” Synthetic Metals, vol. 209, pp. 304–312, 2015. View at Publisher · View at Google Scholar
  • S. Hena, N. Fatihah, S. Tabassum, J. Lalung, and S. Y. Jing, “Magnetophoretic harvesting of freshwater microalgae using polypyrrole/Fe3O4 nanocomposite and its reusability,” Journal of Applied Phycology, 2015. View at Publisher · View at Google Scholar
  • Ka Yeung Terence Lee, HaoTian Harvey Shi, Keryn Lian, and Hani E Naguib, “Flexible multiwalled carbon nanotubes/conductive polymer composite electrode for supercapacitor applications,” Smart Materials and Structures, vol. 24, no. 11, pp. 115008, 2015. View at Publisher · View at Google Scholar
  • Mehrnaz Joulazadeh, and Amir H. Navarchian, “Polypyrrole nanotubes versus nanofibers: A proposed mechanism for predicting the final morphology,” Synthetic Metals, vol. 199, pp. 37–44, 2015. View at Publisher · View at Google Scholar
  • Sakineh Chabi, Chuang Peng, Zhuxian Yang, Yongde Xia, and Yanqiu Zhu, “Three dimensional (3D) flexible graphene foam/polypyrrole composite: towards highly efficient supercapacitors,” Rsc Advances, vol. 5, no. 6, pp. 3999–4008, 2015. View at Publisher · View at Google Scholar
  • B. P. Vinayan, Nele I. Schwarzburger, and Maximilian Fichtner, “ Synthesis of a nitrogen rich (2D–1D) hybrid carbon nanomaterial using a MnO 2 nanorod template for high performance Li-ion battery applications ,” J. Mater. Chem. A, vol. 3, no. 13, pp. 6810–6818, 2015. View at Publisher · View at Google Scholar
  • Heike L. K. S. Mosch, Stephanie Höppener, Renzo M. Paulus, Bernd Schröter, Ulrich S. Schubert, and Anna Ignaszak, “The correlation of the binding mechanism of the polypyrrole–carbon capacitive interphase with electrochemical stability of the composite electrode,” Phys. Chem. Chem. Phys., vol. 17, no. 20, pp. 13323–13332, 2015. View at Publisher · View at Google Scholar
  • Edgar A. Sanches, Scarlat F. Alves, Juliana C. Soares, Arnaldo M. da Silva, Cristina G. da Silva, Sérgio M. de Souza, and Hidembergue O. da Frota, “Nanostructured Polypyrrole Powder: A Structural and Morphological Characterization,” Journal of Nanomaterials, vol. 2015, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  • Makara Lay, J. Alberto Méndez, Marc Delgado-Aguilar, Kim Ngun Bun, and Fabiola Vilaseca, “Strong and electrically conductive nanopaper from cellulose nanofibers and polypyrrole,” Carbohydrate Polymers, 2016. View at Publisher · View at Google Scholar
  • Zahoor Ahmad, Muhammad Aziz Choudhary, Aneela Mehmood, Riffat Wakeel, Tashfeen Akhtar, and Muhammad Aftab Rafiq, “Synthesis of polypyrrole nano/microspheres using cobalt(III) as an oxidizing agent and its ammonia sensing behavior,” Macromolecular Research, 2016. View at Publisher · View at Google Scholar
  • R. Salgado-Delgado, A. Olarte-Paredes, Z. Vargas-Galarza, E. García-Hernández, A. M. Salgado-Delgado, E. Rubio-Rosas, J. Campos-Álvarez, and V. M. Castaño, “Electrical Properties of Polymer/Carbon Nanotube Blends,” Journal of Electronic Materials, vol. 45, no. 10, pp. 5341–5346, 2016. View at Publisher · View at Google Scholar
  • N. Aravindan, and M.V. Sangaranarayanan, “Influence of solvent composition on the anti-corrosion performance of copper–polypyrrole (Cu–PPy) coated 304 stainless steel,” Progress in Organic Coatings, vol. 95, pp. 38–45, 2016. View at Publisher · View at Google Scholar
  • Sajad Pirsa, Mohsen Zandi, and Hadi Almasi, “Determination of Quality and Spoilage of Milk by Synthesized Polypyrrole-Ag Nanocomposite Fiber at Room Temperature,” Journal Of Food Process Engineering, vol. 39, no. 3, pp. 266–272, 2016. View at Publisher · View at Google Scholar
  • Hadi Farrokhi, Omid Khani, Firouzeh Nemati, and Mohammad Jazirehpour, “Synthesis and investigation of microwave characteristics of polypyrrole nanostructures prepared via self-reactive flower-like MnO2 template,” Synthetic Metals, vol. 215, pp. 142–149, 2016. View at Publisher · View at Google Scholar
  • Qi Zhou, Chunjie Yan, and Wenjun Luo, “Polypyrrole coated secondary fly ash-iron composites: Novel floatable magnetic adsorbents for the removal of chromium (VI) from wastewater,” Materials & Design, vol. 92, pp. 701–709, 2016. View at Publisher · View at Google Scholar
  • Wonjoo Na, Jin Wook Park, Ji Hyun An, and Jyongsik Jang, “Size-controllable ultrathin carboxylated polypyrrole nanotube transducer for extremely sensitive 17β-estradiol FET-type biosensors,” J. Mater. Chem. B, 2016. View at Publisher · View at Google Scholar
  • A Mohammad, A Mahmood, K T Chin, M K Danquah, and S van Stratan, “Nano silver diffusion behaviour on conductive polymer during doping process for high voltage application,” IOP Conference Series: Materials Science and Engineering, vol. 206, pp. 012048, 2017. View at Publisher · View at Google Scholar
  • Emmanuel Scorsone, Nouha Gattout, Lionel Rousseau, and Gaelle Lissorgues, “Porous diamond pouch cell supercapacitors,” Diamond and Related Materials, 2017. View at Publisher · View at Google Scholar
  • Amin Imani, and Gholamali Farzi, “Low temperature process of electronic charge transport mechanism in PANi/MWCNT nanocomposites: tubular morphology,” Journal of Materials Science: Materials in Electronics, 2017. View at Publisher · View at Google Scholar
  • Makara Lay, Israel González, Joaquim A. Tarrés, Neus Pellicer, Kim Ngun Bun, and Fabiola Vilaseca, “High electrical and electrochemical properties in bacterial cellulose / polypyrrole membranes,” European Polymer Journal, 2017. View at Publisher · View at Google Scholar
  • Sudeshna Bagchi, and C Ghanshyam, “Understanding the gas sensing properties of polypyrrole coated tin oxide nanofiber mats,” Journal of Physics D: Applied Physics, vol. 50, no. 10, pp. 105302, 2017. View at Publisher · View at Google Scholar
  • Qianqian Zhang, Jianxin Kang, Zhiqiang Xie, Xungang Diao, Zhaoyue Liu, and Jin Zhai, “Highly Efficient Gating of Electrically Actuated Nanochannels for Pulsatile Drug Delivery Stemming from a Reversible Wettability Switch,” Advanced Materials, pp. 1703323, 2017. View at Publisher · View at Google Scholar
  • Khan Malook, Hamayun Khan, Mutabar Shah, and Ihsan-Ul-Haque, “Synthesis, characterization and electrical properties of polypyrrole/V2O5 composites,” Korean Journal of Chemical Engineering, 2017. View at Publisher · View at Google Scholar
  • Kyung Seok Kang, Chan Hyuk Jee, Ji-Hong Bae, Hyo Jin Jung, and PilHo Huh, “Synthesis and characterization of novel polypyrrole hybrid nanotubules incorporated with polyaniline spots,” AIP Advances, vol. 7, no. 11, pp. 115219, 2017. View at Publisher · View at Google Scholar
  • Anuradha B. Bhalerao, Ravindra N. Bulakhe, Prashant R. Deshmukh, Jae-Jin Shim, Keshav N. Nandurkar, Bhiwa G. Wagh, S. V. Prabhakar Vattikuti, and Chandrakant D. Lokhande, “Chemically synthesized 3D nanostructured polypyrrole electrode for high performance supercapacitor applications,” Journal of Materials Science: Materials in Electronics, 2018. View at Publisher · View at Google Scholar
  • Mallika Datta, Atin Chaudhuri, Mainak Mitra, Devarun Nath, and Debasish Das, “Development of biodegradable conductive cotton yarns by in-situ polymerisation of pyrrole,” The Journal of The Textile Institute, pp. 1–6, 2018. View at Publisher · View at Google Scholar
  • E. Gutiérrez Pineda, M.J. Rodríguez Presa, C.A. Gervasi, and A.E. Bolzán, “Tubular-Structured Polypyrrole Electrodes Decorated with Gold Nanoparticles for Electrochemical Sensing,” Journal of Electroanalytical Chemistry, 2018. View at Publisher · View at Google Scholar