Table of Contents Author Guidelines Submit a Manuscript
E-Journal of Chemistry
Volume 7, Issue 4, Pages 1212-1219
http://dx.doi.org/10.1155/2010/626235

The Preparation and Characterization of Chitosan / Poly (Vinyl Alcohol) Blended Films

Esam A. El-Hefian,1 Mohamed Mahmoud Nasef,2 and Abdul Hamid Yahaya1

1Department of Chemistry, Faculty of Science, University of Malaya, Kuala Lumpur-50603 , Malaysia
2Chemical Engineering Department, Faculty of Chemical and Natural Resources Engineering, Universiti Teknologi Malaysia, UTM Skudai-81310, Johor, Malaysia

Received 5 December 2009; Accepted 2 February 2010

Copyright © 2010 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [37 citations]

The following is the list of published articles that have cited the current article.

  • Yanee Keereeta, Titipun Thongtem, and Somchai Thongtem, “Fabrication of ZnWO4 nanofibers by a high direct voltage electrospinning process,” Journal of Alloys and Compounds, vol. 509, no. 23, pp. 6689–6695, 2011. View at Publisher · View at Google Scholar
  • Surangkana Wannapop, Titipun Thongtem, and Somchai Thongtem, “Characterization of SrWO4-PVA and SrWO4 spiders' webs synthesized by electrospinning,” Ceramics International, vol. 37, no. 8, pp. 3499–3507, 2011. View at Publisher · View at Google Scholar
  • Jarupat Sungpanich, Titipun Thongtem, and Somchai Thongtem, “Fabrication of WO3 nanofibers by high voltage electrospinning,” Materials Letters, vol. 65, no. 19-20, pp. 3000–3004, 2011. View at Publisher · View at Google Scholar
  • Esam A. El-Hefian, Abdul Hamid Yahaya, and Mohamed Mahmoud Nasef, “Preparation and characterization of chitosan/poly(vinyl alcohol) blended films: Mechanical, thermal and surface investigations,” E-Journal of Chemistry, vol. 8, no. 1, pp. 91–96, 2011. View at Publisher · View at Google Scholar
  • Aashish Gaurav, A. Ashamol, M.V. Deepthi, and R.R.N. Sailaja, “Biodegradable nanocomposites of cellulose acetate phthalate and chitosan reinforced with functionalized nanoclay: Mechanical, thermal, and biodegradability studies,” Journal of Applied Polymer Science, vol. 125, no. 1, pp. E16–E26, 2012. View at Publisher · View at Google Scholar
  • Esam A. El-Hefian, Mohamed Mahmoud Nasef, and Abdul Hamid Yahaya, “Preparation and characterization of chitosan/agar blended films: Part 2. Thermal, Mechanical, and surface properties,” E-Journal of Chemistry, vol. 9, no. 2, pp. 510–516, 2012. View at Publisher · View at Google Scholar
  • Jenjira Muangban, Watchara Sukbua, Napat Triroj, and Papot Jaroenapibal, “Particle size-dependent electrical resistances of WO3 nanofibers,” Proceedings of the IEEE Conference on Nanotechnology, 2012. View at Publisher · View at Google Scholar
  • I.M. Garnica-Palafox, F.M. Sánchez-Arévalo, C. Velasquillo, Z.Y. García-Carvajal, J. García-López, C. Ortega-Sánchez, C. Ibarra, G. Luna-Bárcenas, and L. Solís-Arrieta, “Mechanical and structural response of a hybrid hydrogel based on chitosan and poly(vinyl alcohol) cross-linked with epichlorohydrin for potential use in tissue engineering,” Journal of Biomaterials Science, Polymer Edition, pp. 1–19, 2013. View at Publisher · View at Google Scholar
  • Surangkana Wannapop, Titipun Thongtem, and Somchai Thongtem, “Fabrication of MgMoO4–PVA and MgMoO4 fibrous webs via a direct high voltage electrospinning process,” Journal of Physics and Chemistry of Solids, vol. 74, no. 5, pp. 677–681, 2013. View at Publisher · View at Google Scholar
  • Heru Susanto, A.M. Samsudin, Nur Rokhati, and I.N. Widiasa, “Immobilization of glucose oxidase on chitosan-based porous composite membranes and their potential use in biosensors,” Enzyme and Microbial Technology, vol. 52, no. 6-7, pp. 386–392, 2013. View at Publisher · View at Google Scholar
  • R. Bhuvaneswari, S. Karthikeyan, S. Selvasekarapandian, D. Vinoth Pandi, N. Vijaya, Arun Araichimani, and C. Sanjeeviraja, “Preparation and characterization of PVA complexed with amino acid, proline,” Ionics, 2014. View at Publisher · View at Google Scholar
  • Carreira, Coutinho, Correia, Gil, Ferreira, Ribeiro, and Correia, “New drug-eluting lenses to be applied as bandages after keratoprosthesis implantation,” International Journal of Pharmaceutics, vol. 477, no. 1-2, pp. 218–226, 2014. View at Publisher · View at Google Scholar
  • A. Rajeswari, Augustine Amalraj, and Anitha Pius, “Removal of phosphate using chitosan-polymer composites,” Journal of Environmental Chemical Engineering, 2015. View at Publisher · View at Google Scholar
  • Dongying Hu, Haixia Wang, and Lijuan Wang, “Physical properties and antibacterial activity of quaternized chitosan/carboxymethyl cellulose blend films,” LWT - Food Science and Technology, 2015. View at Publisher · View at Google Scholar
  • Paola Reyes-Chaparro, Nestor Gutierrez-Mendez, Erika Salas-Munoz, Juan Guillermo Ayala-Soto, David Chavez-Flores, and Leon Hernandez-Ochoa, “Effect of the Addition of Essential Oils and Functional Extracts of Clove on Physicochemical Properties of Chitosan-Based Films,” International Journal Of Polymer Science, 2015. View at Publisher · View at Google Scholar
  • Olla Sharhan, Abdul Hamid Yahaya, and Mohamed Mahmoud Nasef, “Preparation and characterization of poly(3-hydroxybutyric acid)/poly(vinyl acetate) blend films,” Asian Journal of Chemistry, vol. 27, no. 3, pp. 979–983, 2015. View at Publisher · View at Google Scholar
  • Alabur Manjunath, Tegginakeri Deepa, Naraganahalli Karibasappa Supreetha, and Mohammed Irfan, “Studies on AC Electrical Conductivity and Dielectric Properties of PVA/NH<sub>4</sub>NO<sub>3</sub> Solid Polymer Electrolyte Films,” Advances in Materials Physics and Chemistry, vol. 05, no. 08, pp. 295–301, 2015. View at Publisher · View at Google Scholar
  • Kaiwen Choo, Yern Ching, Cheng Chuah, Sabariah Julai, and Nai-Shang Liou, “Preparation and Characterization of Polyvinyl Alcohol-Chitosan Composite Films Reinforced with Cellulose Nanofiber,” Materials, vol. 9, no. 8, pp. 644, 2016. View at Publisher · View at Google Scholar
  • I.M. Garnica-Palafox, and F.M. Sánchez-Arévalo, “Influence of natural and synthetic crosslinking reagents on the structural and mechanical properties of chitosan-based hybrid hydrogels,” Carbohydrate Polymers, 2016. View at Publisher · View at Google Scholar
  • Sara Mafirad, Mohammad Reza Mehrnia, Payam Zahedi, and Seyed-Nezamedin Hosseini, “ Chitosan-based nanocomposite membranes with improved properties: Effect of cellulose acetate blending and TiO 2 nanoparticles incorporation ,” Polymer Composites, 2017. View at Publisher · View at Google Scholar
  • Hualin Wang, Chongyang Jin, Ru Zhang, Xingjiang Li, Lidan Zhang, Linlin Li, and Shaotong Jiang, “Sodium lactate loaded chitosan-polyvinyl alcohol/montmorillonite composite film towards active food packaging,” Innovative Food Science and Emerging Technologies, vol. 42, pp. 101–108, 2017. View at Publisher · View at Google Scholar
  • Baki Aksakal, Utkan Şahinturk, and Önder Yargı, “Uniaxial tensile and structural properties of poly(vinyl alcohol) films: The influence of heating and film thickness,” Journal of Applied Polymer Science, vol. 134, no. 23, 2017. View at Publisher · View at Google Scholar
  • Dongying Hu, Tiangang Qiang, and Lijuan Wang, “Quaternized chitosan/polyvinyl alcohol/sodium carboxymethylcellulose blend film for potential wound dressing application,” Wound Medicine, vol. 16, pp. 15–21, 2017. View at Publisher · View at Google Scholar
  • Irina Paula Merlusca, Doina Simona Matiut, Gabriela Lisa, Mihaela Silion, Luiza Gradinaru, Stefan Oprea, and Ionel Marcel Popa, “Preparation and characterization of chitosan–poly(vinyl alcohol)–neomycin sulfate films,” Polymer Bulletin, 2017. View at Publisher · View at Google Scholar
  • Mahmoud Bounekhel, Asma Chetouani, Meriem Elkolli, and Djafer Benachour, “Chitosan/oxidized pectin/PVA blend film: mechanical and biological properties,” Polymer Bulletin, vol. 74, no. 10, pp. 4297–4310, 2017. View at Publisher · View at Google Scholar
  • Intan Puspitasari, Nasikhudin, Markus Diantoro, Ahmad Kusumaatmaja, and Kuwat Triyana, “Effect of blend ratio on morphology and swelling properties of PVA/chitosan nanofibers,” Materials Science Forum, vol. 901, pp. 79–84, 2017. View at Publisher · View at Google Scholar
  • Shiji Mathew, S. Snigdha, Jyothis Mathew, and E.K. Radhakrishnan, “Poly(vinyl alcohol): Montmorillonite: Boiled rice water (starch) blend film reinforced with silver nanoparticles; characterization and antibacterial properties,” Applied Clay Science, vol. 161, pp. 464–473, 2018. View at Publisher · View at Google Scholar
  • Mehran Bozorgi, Faranak Samani, Saeed Abbasizadeh, and Seyyed Ebrahim Mousavi, “Performance of synthesized cast and electrospun PVA/chitosan/ZnO-NH2 nano-adsorbents in single and simultaneous adsorption of cadmium and nickel ions from wastewater,” Environmental Science and Pollution Research, vol. 25, no. 18, pp. 17457–17472, 2018. View at Publisher · View at Google Scholar
  • Nurul Mujahidah Ahmad Khairuddin, Amalina Muhammad Afifi, Shaza Eva Mohamad, Nur Awanis Hashim, and Katayoon Kalantari, “Immobilization of bovine serum albumin on the chitosan/PVA film,” Sains Malaysiana, vol. 47, no. 6, pp. 1311–1318, 2018. View at Publisher · View at Google Scholar
  • Nasikhudin, M. Diantoro, A. Kusumaatmaja, and K. Triyana, “ Stabilization of PVA/Chitosan/TiO 2 Nanofiber Membrane with Heat Treatment and Glutaraldehyde Crosslink ,” IOP Conference Series: Materials Science and Engineering, vol. 367, pp. 012004, 2018. View at Publisher · View at Google Scholar
  • Nehad N. Rozik, Salwa L. Abd-Elmessieha, Nagwa A. Kamel, and Ahmed A.F. Soliman, “Biophysical investigation of curcumin based nanocomposite for wound dressing application,” Journal of Applied Pharmaceutical Science, vol. 8, no. 5, pp. 35–44, 2018. View at Publisher · View at Google Scholar
  • A. Daskalova, A. Trifonov, I. Bliznakova, C. Nathala, A. Ajami, W. Husinsky, H. Declercq, and I. Buchvarov, “Selective cell response on natural polymer bio-interfaces textured by femtosecond laser,” Applied Physics A, vol. 124, no. 2, 2018. View at Publisher · View at Google Scholar
  • Chao Tan, Chris Rudd, Andrew Parsons, Nusrat Sharmin, Junxiao Zhang, Wanru Chen, and Ifty Ahmed, “Chitosan as a Coupling Agent for Phosphate Glass Fibre/Polycaprolactone Composites,” Fibers, vol. 6, no. 4, pp. 97, 2018. View at Publisher · View at Google Scholar
  • Pravin Shende, Bhumi Oza, and R. S. Gaud, “Silver-doped titanium dioxide nanoparticles encapsulated in chitosan–PVA film for synergistic antimicrobial activity,” International Journal of Polymeric Materials and Polymeric Biomaterials, pp. 1–7, 2018. View at Publisher · View at Google Scholar
  • Shiji Mathew, Jyothis Mathew, and E. K. Radhakrishnan, “Polyvinyl alcohol/silver nanocomposite films fabricated under the influence of solar radiation as effective antimicrobial food packaging material,” Journal of Polymer Research, vol. 26, no. 9, 2019. View at Publisher · View at Google Scholar
  • Manokaran Vadivel, Murugesan Sankarganesh, Jeyaraj Dhaveethu Raja, Jegathalaprathaban Rajesh, Dhanuskodi Mohanasundaram, and Muthukaruppan Alagar, “Bioactive constituents and bio-waste derived chitosan / xylan based biodegradable hybrid nanocomposite for sensitive detection of fish freshness,” Food Packaging and Shelf Life, vol. 22, pp. 100384, 2019. View at Publisher · View at Google Scholar
  • Ali Abedi, Mahdi Hasanzadeh, and Lobat Tayebi, “Conductive nanofibrous Chitosan/PEDOT:PSS tissue engineering scaffolds,” Materials Chemistry and Physics, vol. 237, pp. 121882, 2019. View at Publisher · View at Google Scholar