Abstract
The batch removal of ferrous ion from aqueous solution using low cost adsorbents such as zea mays dust carbon(ZDC) under different experimental conditions were investigated in this study. The process parameters studied include agitation time, initial metal ion concentration, carbon dose, pH and temperature. The adsorption followed first order reaction equation and the rate is mainly controlled by intraparticle diffusion. Freundlich and Langmuir isotherm models were applied to the equilibrium data. The adsorption capacity (Qm) obtained from the Langmuir isotherm plot were found to 37.17, 38.31, 39.37 and 40.48 mg/g. The temperature variation study showed that the ferrous ions adsorption is endothermic and spontaneous with increased randomness at the solid solution interface. Significant effect on adsorption was observed on varying the pH of the ferrous ion solutions. The Langmuir and Freundlich adsorption isotherms obtained positive ΔH0 value, pH dependent results and desorption of metal ions in mineral acid suggest that the adsorption of ferrous ion on ZDC involves physisorption mechanism.