Modeling, Simulation, and Kinetic Studies of Solvent-Free Biosynthesis of Benzyl Acetate

Garlapati, Vijay Kumar; Kumari, Annapurna; Mahapatra, Paramita; Banerjee, Rintu

doi:https://doi.org/10.1155/2013/451652

Journal of Chemistry

On this page

Abstract Introduction Materials and Methods Results and Discussion Conclusion Acknowledgments References Copyright Related Articles

Research Article | Open Access

Volume 2013 | Article ID 451652 | https://doi.org/10.1155/2013/451652

Modeling, Simulation, and Kinetic Studies of Solvent-Free Biosynthesis of Benzyl Acetate

Vijay Kumar Garlapati,¹Annapurna Kumari,¹Paramita Mahapatra,¹and Rintu Banerjee¹

Academic Editor: Jose M. Cruz

Received15 May 2013

Accepted28 Aug 2013

Published03 Oct 2013

Abstract

Solvent-free biosynthesis of benzyl acetate through immobilized lipase-mediated transesterification has been modeled and optimized through statistical integrated artificial intelligence approach. A nonlinear response surface model has been successfully developed based on central composite design with transesterification variables, namely, molarity of alcohol, reaction time, temperature, and immobilized lipase amount as input variables and molar conversion (%) as an output variable. Statistical integrated genetic algorithm optimization approach results in an optimized molar conversion of 96.32% with the predicted transesterification variables of 0.47 M alcohol molarity in a reaction time of 13.1 h, at 37.5°C using 13.31 U of immobilized lipase. Immobilized lipase withstands more than 98% relative activity up to 6 recycles and maintains 50% relative activity until 12 recycles. The kinetic constants of benzyl acetate, namely, and were found to be 310 mM and 0.10 mmol h⁻¹ g⁻¹, respectively.

1. Introduction

Flavour esters of short chain carboxylic acids and alcohols are among the most important and versatile components of natural flavors and fragrances and have a wide range of applications in food, beverage, cosmetic, and pharmaceutical sectors [1]. Knowing the health prospects of natural flavours, most of the customers are inclining towards the daily commodities which utilize biologically derived flavours (considered as “Natural Flavours”) instead of chemical ones [2]. Among different biotechnological processes, immobilized lipase-mediated transesterification under solvent-free conditions is one of the economically viable clean technology for flavor ester production with continuous mode of operation [3, 4]. The specificity of lipase, usage of mild reaction tempeartures, and solvent-free conditions making this process as immense commercial of interest and replacing the existed chemical catalyzed flavour ester synthesis [5]. Benzyl acetate is a short chain flavor ester found in plants such as jasmine, hyacinth, gardenias, and azaleas with the commercial value in flavour, food, and chemical industries. The global demand for benzyl acetate ranges between 5000 and 10,000 tons per annum. Covalent immobilization of lipases to insoluble polymeric supports aids in the industrial process economics by facilitating easy enzyme recovery from the reaction mixture [6]. The regio- and stereospecificities of immobilized lipase-mediated transesterification reactions enable the production of certain flavour compounds which are difficult to synthesize by chemical means in a sustainable manner and the products are considered as “natural.” Several researchers reported the utilization of these catalysts (immobilized lipases) for flavour ester synthesis. Some attempts have been also made for the synthesis of benzyl acetate in solvent-associated approach through chemical and biotechnological approaches. Amarnath et al. 2004 [7] reported the synthesis of benzyl acetate using polyaniline salts (Sb/Pd ratio of 0.7). Majumder et al. 2006 [8] utilized hexane as solvent, Lipozyme RM IM for the synthesis of benzyl acetate and investigated the effect of enzyme amount and substrate molar ratio on benzyl acetate yield. Synthesis of benzyl acetate under solvent-free conditions facilitate, the simplification of the downstream processing and reduced environmental hazards, and reduction of separation costs due to the nonrequirement of solvent recovery [9, 10]. In lipase-mediated synthesis of flavour esters, the transesterification variables play an important role on the final ester yield. Moreover, the reaction side product water hampers the maximum ester yield by promoting the reverse reaction, hydrolysis. To attain the optimal yields of these flavour esters, having the knowledge of individual and interaction effects of transesterification variables on ester yield will be helpful to model and optimize the process.

In recent days, several researchers acknowledged the better solvable approaches of statistical integrated evolutionary optimization techniques in modeling and optimization of different bioprocesses. This integrated approach works on the statistical-based response surface methodology (RSM) and artificial intelligence-based Genetic algorithm (GA) approach [11]. RSM is a powerful mathematical modeling approach which does not need the explicit expressions of the physical meaning of the system or process under investigation and develops nonparametric regression model. This model approximates the functional relationships between transesterification variables (Input) and the molar conversion (output and response) of the process using experimental data [12] and helpful to estimate the optimal settings of input variables to maximize the response. Artificial intelligence based GA, developed by Holland, uses the Darwinian evolution concept of “survival of the fittest” to overcome the local optima obstacle by attaining the global optima quickly [13]. There have been a few attempts of using only statistical techniques in lipase-mediated synthesis of flavour esters to model and optimize the process but no attempts have been found using statistical integrated evolutionary approaches. A statistical approach was utilized to optimize the lipase. Palatase catalyzed biosynthesis of flavour-active octanoic acid esters from coconut cream and fusel oil as the biocatalyst with the influential significance of temperature, time, and enzyme amount on the ester yield [14, 15]. Esterification reactions of butyl acetate and isoamyl acetate synthesis catalyzed by Candida antarctica lipase B (Novozym 435) were also optimized using response surface methodology [16, 17].

Hence, in the present study, the statistical integrated artificial intelligence was utilized for the first time in modeling and optimization of the immobilized lipase catalyzed synthesis of food flavour ester under solvent-free conditions. The significance of individual and combined effects of various transesterification variables, namely, molarity of alcohol, reaction time, temperature and immobilized enzyme amount on molar conversion was studied through response surface methodology and optimal conditions of the process was determined through GA approach. The reusability and kinetics of immobilized lipase in solvent-free system were also investigated.

2. Materials and Methods

2.1. Microorganism and Chemicals

A well-known lipolytic fungal strain Rhizopus oryzae 3562 was isolated from the local soil of IIT Kharagpur and maintained on Potato Dextrose Agar (PDA) medium. -nitrophenyl panmitate (-NPP) and benzyl acetate standards were purchased from Sigma (USA). All chemicals used were of AR grade and were procured from Merck, Qualigens, and Himedia, India

2.2. Production and Immobilization of Lipase

Lipase was produced using wheat bran as a substrate through solid-state fermentation [18]. Lipase immobilization was carried out using covalent attachment technique using activated silica as immobilization matrix and was explained in our previous work [19].

2.3. Lipase Assay and Protein Determination

Lipase assay was done spectrophotometrically using pNPP as the substrate [20]. One unit (U) of enzyme is defined as the amount of enzyme that liberates one micromole of -nitrophenol per minute under the assay conditions. Total protein was estimated using bovine serum albumin (BSA) as standard. [21].

2.4. Transesterification Reaction

Transesterification reaction was carried out in screw-capped vials containing benzyl alcohol in vinyl acetate (0.3–0.7 M), where vinyl acetate acts as an acyl donor. Reaction was initiated by the addition of immobilized R. oryzae 3562 lipase (8–16 U). Samples were placed in an orbital shaker at 200 rpm and temperatures (30–50°C) for a time interval of 8–16 h, along with the respective controls (based on the central composite design and one variable at time experiments).

2.5. GC Analysis

Aliquots of reaction mixture were withdrawn periodically from reaction mixture and centrifuged at 1747 g for 10 min to remove the immobilized enzyme then diluted with -hexane (10 times). Synthesis of benzyl acetate was analyzed by injecting the diluted aliquots of the reaction mixture in a gas chromatograph (Agilent 6820). The column temperature was kept at 100°C for 1 min, thereafter raised to 180°C at the rate of 15°C/min and maintained at this temperature for 2 min. The temperatures of both the injector and detector were set at 250°C. Nitrogen was used as a carrier gas. The retention time of benzyl alcohol and benzyl acetate was 3.2 min, and 4.4 min respectively.

2.6. Modelling Studies through RSM

Response surface methodology (RSM) is a statistical model approach for empirical modeling which evaluates the effect of individual and interaction effects of the process parameters on the corresponding response value. These effects can be approximated by the quadratic model equation through a sequence of designed experiments [22]. Transesterification reaction variables such as molarity of alcohol (M), reaction time (h), temperature (°C), and immobilized enzyme amount (U) play an important role in solvent-free synthesis of Benzyl acetate. The individual and interaction effects of these parameters on the flavor ester yield in terms of molar conversion (%) were studied by means of a central composite design (with four variables at three levels) of RSM using MINITAB 14 software. Range of these transesterification was chosen through the one variable at a time experiments and tabulated in Table 1. The set of experiments executed was shown in Table 2. Results were analyzed through the MINITAB 14 programs through the analysis of variance (ANOVA) and significance tests, and obtained RSM model was checked for adequacy through coefficient of determination ( & adjusted ) and deleted residuals.

2.7. Artificial Intelligence-Based Optimization Approach

Simulation of the transesterification process through GA approach provides an accurate predicted result against the usual gradient-based optimization approaches. The parallel search pattern of GA makes the optimization task of choice for various industrial problems. In the present approach of binary coded GA (works on the mechanics of coping of the strings), three operations, namely, reproduction, crossover (), and mutation () play an important role in creating a better solution. At first, the optimization approach starts with a randomly generated initial population () of strings (in the form of binary coded individuals). The resultant fitness of each individual string after each generation is evaluated with respect to the given molar conversion (objective function) using the reproduction operator. At the end of each cycle, a mating pool of good strings was selected from the fitness value of each population using reproduction operation. During crossover operation, the randomly selected mating pairs exchange properties between the two parents to form two children solutions. Mutation operation is used to avoid the local minima problem, which brings a local change to the solution. The sequence of these steps will repeat until the termination criteria met [13]. In the present attempt of maximization of benzyl acetate molar conversion (%), utilizing the duality concept the maximization problem was converted to minimization problem. An overall 40 bits (10-bits of each variable) GA-string was utilized in the search pattern.

3. Results and Discussion

In lipase-catalyzed transesterification reactions, different transesterification variables, namely, molarity of alcohol, reaction time, temperature, and enzyme amount play an important role on the final molar conversion [4]. In this study, central composite design of RSM including five factors with three levels was used to obtain a proper model for the immobilized lipase-mediated synthesis of flavour esters.

3.1. Model Development, Statistical Analysis, and Validation

Modeling task of immobilized lipase-mediated solvent-free synthesis of benzyl acetate has been carried out through running of suggested set of experimental runs of central composite design. The complete set of 27 experimental design matrix and its responses based on experimental runs and its predicted values of molar conversion proposed by CCD are given in Table 2, which facilitates in evaluating relationship between controllable experimental factors and observed results [23]. Based on these results, an empirical relationship between the responses and independent variables of immobilized lipase-catalyzed biosynthesis of benzyl acetate has been expressed using the following second-order polynomial equation in coded form: where , , and represent the input process namely molarity of alcohol (M), reaction time (h), temperature (°C), and immobilized enzyme amount (U), respectively.

The values of significance test (Table 3) for , , , , and , are found to be less than 0.05 and are considered to have significant impact on the molar conversion (%) by considering 95% () as a level of confidence. The value of the factors , , , , , , and is found to be more than the confidence level (0.05), but their square terms value is found to be less than the confidence level which indicates its nonlinear relationship with the response. The significant contribution of the linear, square, and interaction terms towards the response has been also depicted through the ANOVA results (Table 4), where the values were seen to be less than the significance value level (α 0.05) for all terms. Moreover, the good prediction accuracy and generalization ability of the predicted model has been visualized through close agreement of predicted and experimental values of the RSM design. The coefficient of multiple regression values and the adjusted values was found to be 98.6%, and 97.1% respectively, which indicate the fitness and adequacy of the model [24]. As there is no dramatic difference between and adj , it can be assumed that the nonsignificant terms have not been included in the model. Furthermore, the analysis of deleted residuals showed that the deleted residuals were well within the acceptable limits of +3 and −3 with only one observation beyond the acceptable limits which can be considered as a case of outlier (Table 2).

The response surface plots (Figure 1) were analyzed to understand the interaction and influence of different transesterification variables on the molar conversion (%) of flavour ester. The response surface plots in Figures 1(a), 1(c), and 1(d) were both part of a parabolic cylinder, exhibiting a minimum and maximum ridge, respectively, in the investigated domain which indicates the nonlinear relationship of interaction variables on molar conversion. In these plots, the optimum values of both variable factors, such as the reaction time & alcohol molarity (Figure 1(a)), enzyme activity & alcohol molarity (Figure 1(c)), and enzyme activity & temperature (Figure 1(f)) could be analyzed by the saddle point or by determining the maxima formed by the - and -coordinates. Interaction effects of temperature with alcohol molarity & reaction time and enzyme activity & reaction time on molar conversion have been depicted through response surface plots of Figures 1(b), 1(d), and 1(e). The convex nature of these plots is clearly indicating the significance of variable interactions on the molar conversion. The response equation can be written in the uncoded form as follows: where , , , and represent the input process parameters of transesterification reaction.

(a)

(b)

(c)

(d)

(e)

(f)

The significant effect of temperature, reaction time, and enzyme amount on ester yield were also reported in case of lipase-mediated synthesis of flavour-active octanoic acid esters acetate [14]. Martins et al. 2011 [16] utilized central composite design of RSM for modeling the esterification reaction of butyl acetate synthesis catalyzed by Candida antarctica lipase B (Novozym 435) and reported the significance effects of transesterification variables such as temperature, alcohol molar ratio, and enzyme content on ester conversion yields. The obtained uncoded nonlinear response equation based on CCD has been taken as objective function for simulation studies of genetic algorithm for enhanced molar conversion (%).

3.2. Artificial Intelligence-Based Optimization Approach

The present optimization approach of binary coded GA has been aimed to enhance the molar conversion of flavor ester synthesized through lipase-mediated transesterification reaction. Parameters such as population size and mutation constant take leading roles in search and selection aspects of the Darwanian evolution [25]. Applying GA in determining optimal molar conversion, tournament selection of size two, uniform crossover probability (Pc) of 0.5, bit-wise mutational probability (Pm) of 0.0001, population size of 50, and maximum number of generations of 38 were employed. Executed parametric study in finding the optimal molar conversion of 96.41% and concerned results is depicted in Figure 2. The predicted transesterification variables were seen to be equal to 0.47 M, 13.17 h, 37.58°C, and 13.31 U for molarity of alcohol, reaction time, temperature, and immobilized lipase amount, respectively. The optimized set of transesterification variables and the corresponding maximum molar conversion of flavor ester were tested in triplicate experimental runs using 0.47 M molarity of alcohol and 13.31 U 13.1 h, at 37.5°C in 13.1 h. Under these results, the molar conversion seen to be equal to 96.32% (10% enhancement compared to one variable at a time selection approach), with the close agreement of GA-predicted value. Several researchers acknowledged the efficient searching abilities of artificial intelligence such as GA in different biochemical studies. Giordano et al. 2011 [26] reported the efficient problem solving approach of GA-coupled Plackett-Burman methodology in enzymatic hydrolysis of lignocellulosic residues. An optimized result has also been reported for the optimization of biocatalytic transglycosylation processes using GA approach [27]. Moreover the enhanced optimizing capability of genetic algorithm has been acknowledged in case of industrial enzymes production. Evolutionary optimization of extraction from fermented broth has been reported for fungal lipase production [28]. Similar enhanced results were reported in case of fermentation medium optimization for the production of glucansucrase [29] and halogenase enzymes [30].

(a)

(b)

(c)

3.3. Reusability of the Biocatalyst

At the end of each cycle, the immobilized lipases were removed from the reaction medium and washed with hexane to remove any substrate or product retained on the matrix. After drying at room temperature, the immobilized lipases were again introduced into fresh medium. The residual activity measured for the immobilized lipase after each cycle is shown in Figure 3. The remaining activity of immobilized lipase after 4 uses accounts for more than 98% of the initial activity, which reduces to 50% after 12 cycles of use. The development of an attractive biocatalyst requires high stability that allows repeated use of the catalytic material. The reduction in the conversion measured after the fifth use of immobilized lipase may be a consequence of a combined effect of deactivation or desorption of lipase and the loss of biocatalyst material due to high stirring speeds and repeated manipulation operations that is, filtration/drying/addition to a new substrate mixture [31]. Karra- Châabouni et al. 2006 [32] reported that approximately 29% of the initial activity was retained after 10 cycles of use for the hexyl acetate synthesis by immobilized Staphylococcus simulans lipase. The Rhizopus sp. lipase immobilized on celite retains its high activity only until the second cycle, while most of its activity was lost after four cycles [33].

3.4. Kinetics of Benzyl Acetate Synthesis

In the reaction, initially when the product concentrations are zero, the expression for initial reaction rate is where is the initial reaction rate, is the maximum reaction rate, and are the respective concentrations of vinyl acetate and benzyl alcohol and and are the kinetic constants for the vinyl acetate and benzyl alcohol, respectively.

In this solvent-free reaction for benzyl acetate synthesis, the concentration of vinyl acetate can be regarded as constant. So the initial reaction rate equation can be expressed simply as where is the initial reaction rate, the maximum initial reaction rate and the apparent Michaelis constant. In the present investigation, kinetic parameters for benzyl acetate synthesis were calculated by varying the benzyl alcohol concentration (125–1000 mM). The kinetic constants and were calculated from the double reciprocal plot shown in Figure 4. The and value for benzyl acetate synthesis was 310 mM and 0.10 mmol h⁻¹ g⁻¹, respectively. Previous studies have shown that the esterification and transesterification reactions using immobilized lipases could be described by the Ping-Pong kinetic models [34, 35]. As the synthesis reaction studied here was carried out at excess of vinyl acetate, so the concentration of vinyl acetate can be regarded as constant. Similar approaches have been applied previously for kinetic studies of lipase-mediated ester synthesis [36, 37].

4. Conclusion

In the present study, the individual and interaction effects of transesterification variables on molar conversion of benzyl acetate were studied and optimized through the statistical integrated artificial intelligence approach under solvent-free conditions catalyzed by immobilized lipase. The obtained results indicate that a maximal molar conversion of 96.32% was achieved in 13.17 h with the 0.47 M benzyl alcohol in vinyl acetate and an immobilized enzyme amount of 13.31 U, at 37.58°C and 200 rpm. The immobilized lipase was reusable for four cycles with retaining the relative activity of more than 98%. The kinetic parameters, and values of the benzyl acetate synthesis were found to be 310 mM and 0.10 mmol h⁻¹ g⁻¹, respectively. The results indicate that the statistical integrated artificial intelligence aspect was an efficient and systematic approach for optimization of immobilized lipase-catalyzed flavour ester synthesis.

Authors’ Contribution

Vijay Kumar Garlapati and Annapurna Kumari equally contributed as a first author.

Acknowledgments

The authors gratefully acknowledge CSIR and MHRD, Govt of India and Department of Biotechnology, India for providing research fellowship to Annapurna Kumari and Vijay Kumar Garlapati, respectively.

References

R. G. Berger, “Biotechnology of flavours—the next generation,” Biotechnology Letters, vol. 31, no. 11, pp. 1651–1659, 2009.
View at: Publisher Site | Google Scholar
Y. C. Park, C. E. H. Shaffer, and G. N. Bennett, “Microbial formation of esters,” Applied Microbiology and Biotechnology, vol. 85, no. 1, pp. 13–25, 2009.
View at: Publisher Site | Google Scholar
A. Wolfson, A. Atyya, C. Dlugy, and D. Tavor, “Glycerol triacetate as solvent and acyl donor in the production of isoamyl acetate with Candida antarctica lipase B,” Bioprocess and Biosystems Engineering, vol. 33, no. 3, pp. 363–366, 2010.
View at: Publisher Site | Google Scholar
P. Mahapatra, A. Kumari, G. V. Kumar, R. Banerjee, and A. Nag, “Kinetics of solvent-free geranyl acetate synthesis by Rhizopus oligosporus NRRL 5905 lipase immobilized on to cross-linked silica,” Biocatalysis and Biotransformation, vol. 27, no. 2, pp. 124–130, 2009.
View at: Publisher Site | Google Scholar
A. Kumari, P. Mahapatra, V. K. Garlapati, R. Banerjee, and S. Dasgupta, “Lipase mediated isoamyl acetate synthesis in solvent-free system using vinyl acetate as acyl donor,” Food Technology and Biotechnology, vol. 47, no. 1, pp. 13–18, 2009.
View at: Google Scholar
X. Zhu, T. Zhou, X. Wu et al., “Covalent immobilization of enzymes within micro-aqueous organic media,” Journal of Molecular Catalysis B, vol. 72, no. 3-4, pp. 145–149, 2011.
View at: Publisher Site | Google Scholar
C. A. Amarnath, S. Palaniappan, and C. Saravanan, “Preparation of benzyl acetate using polyaniline salts as catalysts—part II,” Polymers for Advanced Technologies, vol. 15, no. 3, pp. 118–121, 2004.
View at: Google Scholar
A. B. Majumder, B. Singh, D. Dutta, S. Sadhukhan, and M. N. Gupta, “Lipase catalyzed synthesis of benzyl acetate in solvent-free medium using vinyl acetate as acyl donor,” Bioorganic and Medicinal Chemistry Letters, vol. 16, no. 15, pp. 4041–4044, 2006.
View at: Publisher Site | Google Scholar
J. E. S. Silva and P. C. Jesus, “Evaluation of the catalytic activity of lipases immobilized on chrysotile for esterification,” Anais da Academia Brasileira de Ciencias, vol. 75, no. 2, pp. 157–162, 2003.
View at: Google Scholar
Y. Yeşiloǧlu, “Utilization of bentonite as a support material for immobilization of Candida rugosa lipase,” Process Biochemistry, vol. 40, no. 6, pp. 2155–2159, 2005.
View at: Publisher Site | Google Scholar
V. K. Garlapati, P. R. Vundavilli, and R. Banerjee, “Evaluation of lipase production by genetic algorithm and particle swarm optimization and their comparative study,” Applied Biochemistry and Biotechnology, vol. 162, no. 5, pp. 1350–1361, 2010.
View at: Publisher Site | Google Scholar
R. H. Myers, D. C. Montgomery, and C. M. Anderson-Cook, Response Surface Methodology: Process and Product Optimization Using Designed Experiments, John Wiley & Sons, Hoboken, NJ, USA, 2009.
J. H. Holland, Adaptation in Natural and Artificial Systems, The MIT Press, Cambridge, Mass, USA, 1992.
J. Sun, B. Yu, P. Curran, and S. Liu, “Optimisation of flavour ester biosynthesis in an aqueous system of coconut cream and fusel oil catalysed by lipase,” Food Chemistry, vol. 35, no. 4, pp. 2714–2720, 2012.
View at: Google Scholar
C. Grosso, S. Ferreira-Dias, and P. Pires-Cabral, “Modelling and optimization of ethyl butyrate production catalysed by Rhizopus oryzae lipase,” Journal of Food Engineering, vol. 115, no. 4, pp. 475–480, 2012.
View at: Google Scholar
A. B. Martins, N. G. Graebin, A. S. G. Lorenzoni, R. Fernandez-Lafuente, M. A. Z. Ayub, and R. C. Rodrigues, “Rapid and high yields of synthesis of butyl acetate catalyzed by Novozym 435: reaction optimization by response surface methodology,” Process Biochemistry, vol. 46, no. 12, pp. 2311–2316, 2011.
View at: Publisher Site | Google Scholar
P. Žnidaršič-Plazl and I. Plazl, “Modelling and experimental studies on lipase-catalyzed isoamyl acetate synthesis in a microreactor,” Process Biochemistry, vol. 44, no. 10, pp. 1115–1121, 2009.
View at: Publisher Site | Google Scholar
V. K. Garlapati and R. Banerjee, “Optimization of lipase production using differential evolution,” Biotechnology and Bioprocess Engineering, vol. 15, no. 2, pp. 254–260, 2010.
View at: Publisher Site | Google Scholar
A. Kumari, P. Mahapatra, G. V. Kumar, and R. Banerjee, “Comparative study of thermostabilty and ester synthesis ability of free and immobilized lipases on cross linked silica gel,” Bioprocess and Biosystems Engineering, vol. 31, no. 4, pp. 291–298, 2008.
View at: Publisher Site | Google Scholar
P. Mahapatra, A. Kumari, V. K. Garlapati, R. Banerjee, and A. Nag, “Optimization of process variables for lipase biosynthesis from Rhizopus oligosporus NRRL 5905 Using evolutionary operation factorial design technique,” Indian Journal of Microbiology, vol. 50, no. 4, pp. 396–403, 2010.
View at: Publisher Site | Google Scholar
O. H. Lowry, N. J. Rosebrough, A. L. Farr, and R. J. Randall, “Protein measurement with the Folin phenol reagent,” The Journal of biological chemistry, vol. 193, no. 1, pp. 265–275, 1951.
View at: Google Scholar
M. A. Bezerra, R. E. Santelli, E. P. Oliveira, L. S. Villar, and L. A. Escaleira, “Response surface methodology (RSM) as a tool for optimization in analytical chemistry,” Talanta, vol. 76, no. 5, pp. 965–977, 2008.
View at: Publisher Site | Google Scholar
D. C. Montgomery and G. C. Runger, Applied Statistics and Probability For Engineers, John Wiley & Sons, Singapore, 2002.
S. S. Bhattacharya, V. K. Garlapati, and R. Banerjee, “Optimization of laccase production using response surface methodology coupled with differential evolution,” New Biotechnology, vol. 28, no. 1, pp. 31–39, 2011.
View at: Publisher Site | Google Scholar
D. E. Goldberg, Genetic Algorithms in Search, Optimization and Machine Learning, Addison-Wesley, Reading, Mass, USA, 1989.
P. C. Giordano, A. J. Beccaria, and H. C. Goicoechea, “Significant factors selection in the chemical and enzymatic hydrolysis of lignocellulosic residues by a genetic algorithm analysis and comparison with the standard Plackett-Burman methodology,” Bioresource Technology, vol. 102, no. 22, pp. 10602–10610, 2011.
View at: Publisher Site | Google Scholar
R. Beine, A. R. Valente, R. Biedendieck, D. Jahn, and J. Seibel, “Directed optimization of biocatalytic transglycosylation processes by the integration of genetic algorithms and fermentative approaches into a kinetic model,” Process Biochemistry, vol. 44, no. 10, pp. 1103–1114, 2009.
View at: Publisher Site | Google Scholar
V. K. Garlapati and R. Banerjee, “Evolutionary and swarm intelligence-based approaches for optimization of lipase extraction from fermented broth,” Engineering in Life Sciences, vol. 10, no. 3, pp. 265–273, 2010.
View at: Publisher Site | Google Scholar
A. Singh, A. Majumder, and A. Goyal, “Artificial intelligence based optimization of exocellular glucansucrase production from Leuconostoc dextranicum NRRL B-1146,” Bioresource Technology, vol. 99, no. 17, pp. 8201–8206, 2008.
View at: Publisher Site | Google Scholar
K. Muffler, M. Retzlaff, K.-H. van Pée, and R. Ulber, “Optimisation of halogenase enzyme activity by application of a genetic algorithm,” Journal of Biotechnology, vol. 127, no. 3, pp. 425–433, 2007.
View at: Publisher Site | Google Scholar
M. L. Foresti and M. L. Ferreira, “Solvent-free ethyl oleate synthesis mediated by lipase from Candida antarctica B adsorbed on polypropylene powder,” Catalysis Today, vol. 107-108, pp. 23–30, 2005.
View at: Publisher Site | Google Scholar
M. Karra-Châabouni, H. Ghamgui, S. Bezzine, A. Rekik, and Y. Gargouri, “Production of flavour esters by immobilized Staphylococcus simulans lipase in a solvent-free system,” Process Biochemistry, vol. 41, no. 7, pp. 1692–1698, 2006.
View at: Publisher Site | Google Scholar
L. L. M. M. Melo, G. M. Pastore, and G. A. Macedo, “Optimized synthesis of citronellyl flavour esters using free and immobilized lipase from Rhizopus sp,” Process Biochemistry, vol. 40, no. 10, pp. 3181–3185, 2005.
View at: Publisher Site | Google Scholar
W. Chulalaksananukul, J. S. Condoret, P. Delorme, and R. M. Willemot, “Kinetic study of esterification by immobilized lipase in n-hexane,” FEBS Letters, vol. 276, no. 1-2, pp. 181–184, 1990.
View at: Publisher Site | Google Scholar
A. Marty, W. Chulalaksananukul, R. M. Willemot, and J. S. Condoret, “Kinetics of lipase-catalyzed esterification in supercritical CO₂,” Biotechnology and Bioengineering, vol. 39, no. 3, pp. 273–280, 1992.
View at: Google Scholar
L. Tang, Z. Hao, M. M. Shehate, and Y. Sun, “A kinetic study of the synthesis of ascorbate fatty acid esters catalysed by immobilized lipase in organic media,” Biotechnology and Applied Biochemistry, vol. 32, no. 1, pp. 35–39, 2000.
View at: Google Scholar
Q.-X. Song and D.-Z. Wei, “Study of Vitamin C ester synthesis by immobilized lipase from Candida sp,” Journal of Molecular Catalysis B, vol. 18, no. 4–6, pp. 261–266, 2002.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2013 Vijay Kumar Garlapati et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

2234

Downloads

2012

Citations