Table of Contents Author Guidelines Submit a Manuscript
Journal of Chemistry
Volume 2015, Article ID 102534, 10 pages
http://dx.doi.org/10.1155/2015/102534
Research Article

Evolution of Lignocellulosic Macrocomponents in the Wastewater Streams of a Sulfite Pulp Mill: A Preliminary Biorefining Approach

1Green Engineering and Resources Research Group, Chemistry and Process & Resource Engineering Department, University of Cantabria, Avenida Los Castros s/n, 39005 Santander, Spain
2Hydrolysis Laboratory, Sniace S.A., Ganzo s/n, 39300 Torrelavega, Spain

Received 12 May 2015; Accepted 21 June 2015

Academic Editor: Ghadir A. El-Chaghaby

Copyright © 2015 Tamara Llano et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. De Jong, A. Higson, P. Walsh, and M. Wellisch, “Product developments in the bio-based chemicals arena,” Biofuels, Bioproducts & Biorefining, vol. 6, no. 6, pp. 606–624, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. T. Llano, C. Rueda, N. Quijorna, A. Blanco, and A. Coz, “Study of the delignification of hardwood chips in a pulping process for sugar production,” Journal of Biotechnology, vol. 162, no. 4, pp. 422–429, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. F. S. Chakar and A. J. Ragauskas, “Review of current and future softwood kraft lignin process chemistry,” Industrial Crops and Products, vol. 20, no. 2, pp. 131–141, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. W. Wang, G. Yang, and J. Chen, “Process of soda-AQ pulping of fast-growing poplar and defibration point,” Advanced Materials Research, vol. 610-613, pp. 3500–3504, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. X. Pan, C. Arato, N. Gilkes et al., “Biorefining of softwoods using ethanol organosolv pulping: preliminary evaluation of process streams for manufacture of fuel-grade ethanol and co-products,” Biotechnology and Bioengineering, vol. 90, no. 4, pp. 473–481, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Akgul and H. Kirci, “An environmentally friendly organosolv (ethanol-water) pulping of poplar wood,” Journal of Environmental Biology, vol. 30, no. 5, pp. 735–740, 2009. View at Google Scholar · View at Scopus
  7. J. Y. Zhu, X. J. Pan, G. S. Wang, and R. Gleisner, “Sulfite pretreatment (SPORL) for robust enzymatic saccharification of spruce and red pine,” Bioresource Technology, vol. 100, no. 8, pp. 2411–2418, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Tian, X. L. Luo, X. S. Yang, and J. Y. Zhu, “Robust cellulosic ethanol production from SPORL-pretreated lodgepole pine using an adapted strain Saccharomyces cerevisiae without detoxification,” Bioresource Technology, vol. 101, no. 22, pp. 8678–8685, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. E. Sklavounos, M. Iakovlev, and A. van Heiningen, “Study on conditioning of SO2-ethanol-water spent liquor from spruce chips/softwood biomass for ABE fermentation,” Industrial & Engineering Chemistry Research, vol. 52, no. 11, pp. 4351–4359, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Sixta, M. Iakovlev, L. Testova et al., “Novel concepts of dissolving pulp production,” Cellulose, vol. 20, no. 4, pp. 1547–1561, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Saadatmand, U. Edlund, A.-C. Albertsson, S. Danielsson, O. Dahlman, and K. Karlström, “Turning hardwood dissolving pulp polysaccharide residual material into barrier packaging,” Biomacromolecules, vol. 14, no. 8, pp. 2929–2936, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Towers, T. Browne, R. Kerekes, J. Paris, and H. Tran, “Biorefinery opportunities for the Canadian pulp and paper industry,” Pulp & Paper Canada, vol. 108, no. 6, pp. 26–29, 2007. View at Google Scholar · View at Scopus
  13. H. Sixta and G. Schild, “A new generation kraft process,” Lenzinger Berichte, vol. 87, pp. 26–37, 2009. View at Google Scholar
  14. M. Paleologou, T. Radiotis, L. Kouisni et al., “New and emerging biorefinery technologies and products for the canadian forest industry,” Journal of Science & Technology for Forest Products and Processes, vol. 1, no. 3, pp. 6–14, 2011. View at Google Scholar · View at Scopus
  15. P. F. Vena, M. Brienzo, M. D. P. García-Aparicio, J. F. Görgens, and T. Rypstra, “Hemicelluloses extraction from giant bamboo (Bambusa balcooa Roxburgh) prior to kraft or soda-AQ pulping and its effect on pulp physical properties,” Holzforschung, vol. 67, no. 8, pp. 863–870, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. J. C. García, M. A. M. Zamudio, A. Pérez et al., “Soda-AQ pulping of Paulownia wood after hydrolysis treatment,” BioResources, vol. 6, no. 2, pp. 971–986, 2011. View at Google Scholar · View at Scopus
  17. A. A. Shatalov and H. Pereira, “High-grade sulfur-free cellulose fibers by pre-hydrolysis and ethanol-alkali delignification of giant reed (Arundo donax L.) stems,” Industrial Crops and Products, vol. 43, no. 1, pp. 623–630, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. J. J. Bozell, S. K. Black, M. Myers, D. Cahill, W. P. Miller, and S. Park, “Solvent fractionation of renewable woody feedstocks: organosolv generation of biorefinery process streams for the production of biobased chemicals,” Biomass and Bioenergy, vol. 35, no. 10, pp. 4197–4208, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. B. Saake, M. Mende, A. Schreiber, B. Ziegler, R. Lehnen, and J. Puls, “Effect of raw material quality on the products of an organosolv based bio-refinery,” in Proceedings of the 16th International Symposium on Wood, Fiber and Pulping Chemistry (ISWFPC '11), pp. 809–812, June 2011. View at Scopus
  20. M. Steindl, M. G. Wolfinger, A. Fried, and H. Sixta, “Mass balance of a MgO-SO2 recovery system-modeling and measurement,” in Proceedings of the TAPPI Fall Technical Conference, 2003.
  21. M. Steindl, M. G. Wolfinger, A. Friedl, H. K. Weber, and H. Sixta, “Modelling of the Lenzing SO2 recovery process and validation with plant data,” Journal of Cleaner Production, vol. 16, no. 2, pp. 208–214, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. M. A. E. Santana and E. Y. A. Okino, “Chemical composition of 36 Brazilian Amazon forest wood species,” Holzforschung, vol. 61, no. 5, pp. 469–477, 2007. View at Publisher · View at Google Scholar · View at Scopus
  23. E. F. Alves, S. K. Bose, R. C. Francis, J. L. Colodette, M. Iakovlev, and A. van Heiningen, “Carbohydrate composition of eucalyptus, bagasse and bamboo by a combination of methods,” Carbohydrate Polymers, vol. 82, no. 4, pp. 1097–1101, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. W. E. Kaar, L. G. Cool, and M. M. Merriman, “The complete analysis of wood polysaccharides using HPLC,” Journal of Wood Chemistry and Technology, vol. 11, no. 4, pp. 447–463, 1991. View at Publisher · View at Google Scholar · View at Scopus
  25. W. E. Kaar and D. L. Brink, “Summative analysis of nine common north American woods,” Journal of Wood Chemistry and Technology, vol. 11, no. 4, pp. 479–494, 1991. View at Publisher · View at Google Scholar · View at Scopus
  26. H. Pereira, “Variability in the chemical composition of plantation eucalypts (Eucalpytus globulus Labill),” Wood and Fiber Science, vol. 20, no. 1, pp. 82–90, 1988. View at Google Scholar
  27. P. Cotterill and S. Macrae, “Improving eucalyptus pulp and paper quality using genetic selection and good organization,” Tappi Journal, vol. 80, no. 6, pp. 82–89, 1997. View at Google Scholar · View at Scopus
  28. V. Gehmayr and H. Sixta, “Dissolving pulps from enzyme treated kraft pulps for viscose application,” Lenzinger Beritche, vol. 89, pp. 152–160, 2011. View at Google Scholar
  29. M. L. Laver and K. P. Wilson, “Determination of carbohydrates in wood pulp products,” Tappi Journal, vol. 76, no. 6, pp. 155–159, 1993. View at Google Scholar
  30. A. J. Ragauskas, “Routine Paper-Pulp Testing,” Renewable Bioproducts Institute, July 2013, http://www.lopdf.net/preview/oJmS9ihMkAgrN5nDJIpN2EDO4M8-YCVyU3VCTptRt1M,/Routine-Paper-Pulp-Testing-Ragauskas-Institute-of-Paper.html?query=Flash-Chromatography-Separation.
  31. M. Suzuki, R. Sakamoto, and T. Aoyagi, “Rapid carbohydrate analysis of wood pulps by ion chromatography,” Tappi Journal, vol. 78, no. 7, pp. 174–177, 1995. View at Google Scholar · View at Scopus
  32. K. Syverud, S. T. Moe, and R. J. A. Minja, “Carbohydrate analysis of pulps using enzymatic hydrolysis and high pressure liquid chromatography , 10th International symposium on wood and pulping chemistry,” in Proceedings of the 10th International Symposium on Wood and Pulping Chemistry, Yokohama, Japan, June 1999.
  33. TAPPI, TAPPI Standard Test Methods, Fibrous Materials and Pulp Testing T1-200 Series by Michael Kowns, TAPPI, Norcross, Ga, USA, 1993.
  34. P. J. Wright and A. F. A. Wallis, “Rapid determination of cellulose in plantation eucalypt woods to predict kraft pulp yields,” Tappi Journal, vol. 81, no. 2, pp. 126–130, 1998. View at Google Scholar · View at Scopus
  35. H. Haykiri-Acma, S. Yaman, M. Alkan, and S. Kucukbayrak, “Mineralogical characterization of chemically isolated ingredients from biomass,” Energy Conversion and Management, vol. 77, pp. 221–226, 2014. View at Publisher · View at Google Scholar · View at Scopus
  36. TAPPI Useful Test Methods, Micro Kappa Number, TAPPI UM 246.
  37. ISO Standards, “Pulps—determination of limiting viscosity number in cupri-ethylenediamine (CED) solution,” ISO 5351:2010, ISO, 2010. View at Google Scholar
  38. T. Llano, N. Quijorna, A. I. Portilla, A. Andrés, and A. Coz, “Analysis of sugars, intermediates and inhibitors in sulfite pulping by HPLC/RID,” in Proceedings of the International Forest, Pulp and Paper Conference—XXII TECNICELPA, Tomar, Portugal, October 2013.
  39. UNE Standards, “Fertilizers—determination of complexed micro-nutrient ions in fertilizers. Identification of lignosulfonates,” Tech. Rep. UNE-EN 16109:2012, 2012. View at Google Scholar
  40. S. T. Thomsen, Z. Kádár, and J. E. Schmidt, “Compositional analysis and projected biofuel potentials from common West African agricultural residues,” Biomass and Bioenergy, vol. 63, pp. 210–217, 2014. View at Publisher · View at Google Scholar · View at Scopus
  41. Z. H. Jiang, A. Audet, B. van Lierop, R. Berry, and R. Menegotto, “Kappa number testing with better repeatability and at lower cost,” in Proceedings of the Annual Meeting—Technical Section, pp. 111–115, Canadian Pulp and Paper Association, 2004.
  42. D. J. Hayes, S. Fitzpatrick, M. H. B. Hayes, and J. R. H. Ross, “The biofine process: production of levulinic acid, furfural, and formic acid from lignocellulosic feedstocks,” in Biorefineries—Industrial Processes and Products: Status Quo and Future Directions, pp. 139–164, Wiley-VCH, Weinheim, Germany, 2006. View at Google Scholar
  43. C. Rueda, G. Ruiz, T. Rafione, M. Marinova, and A. Coz, “A kinetic model for wood pulping and polysaccharide production in an acid sulfite process,” in Proceedings of the 3rd International Polysaccharide Conference. Polysaccharides and Polysaccharide-Derived Products, from Basic Science to Applications (EPNOE '13), Nice, France, October 2013.
  44. T. J. Irick, K. West, H. H. Brownell, W. Schwald, and J. N. Saddler, “Comparison of colorimetric and HPLC techniques for quantitating the carbohydrate components of steam-treated wood,” Applied Biochemistry and Biotechnology, vol. 17, no. 1–3, pp. 137–149, 1988. View at Publisher · View at Google Scholar · View at Scopus
  45. R. C. Pettersen, V. H. Schwandt, and M. J. Effland, “An Analysis of the wood sugar assay using HPLC: a comparison with paper chromatography,” Journal of Chromatographic Science, vol. 22, no. 11, pp. 478–484, 1984. View at Publisher · View at Google Scholar · View at Scopus
  46. C. Chirat, D. Lachenal, and M. Sanglard, “Extraction of xylans from hardwood chips prior to kraft cooking,” Process Biochemistry, vol. 47, no. 3, pp. 381–385, 2012. View at Publisher · View at Google Scholar · View at Scopus
  47. E. Sjöholm, K. Gustafsson, F. Berthold, and A. Colmsjö, “Influence of the carbohydrate composition on the molecular weight distribution of kraft pulps,” Carbohydrate Polymers, vol. 41, no. 1, pp. 1–7, 2000. View at Publisher · View at Google Scholar · View at Scopus