Abstract

The objective of this study was to characterize and compare the tissue-associated differences in the fatty acid profiles of intramuscular and subcutaneous fat from pasture fed nondescript deshi breed bulls of Bangladesh. The average chemical composition of the longissimus muscle was as follows: moisture %, protein %, intramuscular fat %, and ash %. There was significant evidence that the lipids of longissimus muscle from the nondescript deshi bulls had a lower content of saturated fatty acids (SFA), monounsaturated fatty acids (MUFA), and conjugated linoleic acid (CLA) and a higher content of polyunsaturated fatty acids (PUFA) compared to subcutaneous fat. Intramuscular fat also showed the highest PUFA/SFA and fatty acids ratios and total n-3 and n-6 PUFAs compared to subcutaneous tissue depots. Overall findings suggest that the meat from pasture fed nondescript deshi breed can be considered as lean meat and healthy for human consumption.

1. Introduction

Currently, in developing countries like Bangladesh the concern about the fat and fatty acid (FA) composition of beef is increasing because some FA can adversely affect the human health and lead to the development of modern chronic diseases. The demand for beef is really high in Bangladesh because of its rich flavors and tastiness, and beef is widely consumed after poultry meat [1]. Beef is mainly consumed by middle to upper class family, while the level of beef consumption is relatively low in poor families.

Beef fats are normally considered as disease promoting food as it is believed to contain high amounts of nutritionally undesirable saturated fatty acids (SFA) and high cholesterol levels [2]. However, numerous studies concluded that only few SFAs have negative effects on human health by raising the total and low-density lipoprotein (LDL) cholesterol and can lead to cardiovascular diseases (CVD) [3]. On the other hand, beef fats also contain several bioactive substances that provide potential health benefits (such as conjugated linoleic acid, CLA, essential omega-3 polyunsaturated fatty acids, coenzyme Q10, glutathione, and lipoic acid) [4].

Consumers tend to favor meat which has low intramuscular fat (IMF) compared to other ones with higher fat of even superior palatability [5]. The quality of fat is dependent on the levels and percentages of FAs. Considering this scenario, numerous studies were carried out in many countries to produce meat of low fat and high PUFA content especially n-3 PUFA [6, 7]. However, FA composition of beef is influenced by several factors, such as diet, sex, breed, age, weight, and level of fatness [8]. The FA composition of subcutaneous tissue is also influenced by the nutritional regime, the degree of the fattening, and the type of subcutaneous tissue [3, 9, 10]. The FA profiles can even vary between subcutaneous fat and muscle fat of similar anatomical position [11].

Meat from animals grazed on pasture has desirable nutritional properties and is greatly valued by consumers because of the higher levels of polyunsaturated fatty acids (PUFAs) and lower ratio of n-6 to n-3 PUFAs it has [1214]. In human, the lower ratio of n-6 to n-3 PUFAs is desirable for lowering the risk of many chronic diseases such as CVD, cancer, inflammatory, and autoimmune diseases [15].

In Bangladesh, no previous study has been conducted on the FA composition of meat influenced by feeding strategies. Several countries in the world have their own database for fat and FA content in beef but information about fat and FA content of the beef in Bangladesh is relatively scarce. Therefore, the aim of this study was to analyze the chemical composition and FA proportions of beef finished on pasture.

2. Materials and Methods

2.1. Sample Collection, Experimental Design, and Diet

The experiment was conducted at the Savar, Dhaka, for a period of 90 days from 19 March to 18 June, 2016. A total number of ten () nondescript deshi breed bulls were used in the study and they were purchased from the local farmers involved in the cow trade. They had an average age of 20 months and average weight of 356 kg at beginning of the experimental period. These bulls were raised on the grazing land of Savar, Dhaka, Bangladesh. Its geographic location is 23.85°N 90.26°E. The climate of this region is classified as tropical and the precipitation is 1990 mm. The average daily maximum and minimum temperature for this region are 33°C and 22°C in March and 34°C and 25.8°C in June.

The dominant natural vegetation in the grazing land of this area was durba (Cynodon dactylon), Dal (Hymenachne pseudointerrupta), dumur (Ficus spp.), and many other unidentified plants.

2.2. Slaughtering and Sampling

The animals were slaughtered according to traditional slaughter (neck cutting without stunning) method in June 2016 at local slaughter house, Savar, Dhaka, Bangladesh. Immediately after slaughter, the longissimus dorsi was removed from the left side of the carcasses and samples for fatty acid composition in the muscle and subcutaneous tissue (between the 12th and 13th ribs) were collected, vacuum-packed, and stored at −20°C until analysis.

2.3. Analysis of Chemical Composition

Analysis of the chemical composition of the samples was carried out according to the AOAC method of analysis [16]. The moisture content was determined by drying meat samples at 105°C to the constant weight. The nitrogen content was determined by the standard Kjeldahl procedure and expressed as protein content (nitrogen content multiplied by 6.25). Ash content in the beef sample was estimated by heating the dried sample in a Muffle furnace at 600°C for 3 h. Ash content was calculated from weight difference. The IMF content was determined using chloroform-methanol extraction method [17].

2.4. Analysis of Fatty Acids Profile

The quantification of fatty acids in the meat samples was done according to the method described as follows.

2.4.1. Lipid Extraction and Methylation

Total lipid from muscle and subcutaneous tissue samples were extracted according to the method of Folch et al. [17] using chloroform and methanol in a ratio of 2 : 1. Briefly, 10 g of sample was mixed with 200 mL of chloroform : methanol (2 : 1, v/v). Then the mixture was vortexed, centrifuged, and filtered. After that the 0.9% NaCl solution was added to the solvent and centrifuged again to form the layers. The upper layer of the solvent was removed by siphoning and the lower layer (chloroform containing total lipids) was collected. From the collected layer, the chloroform was removed under vacuum at 40°C and extracted fat was collected and content was determined gravimetrically.

The FAs obtained after extraction were converted to the corresponding fatty acid methyl esters (FAMEs) according to the method described by Sukhija and Palmquist [18] with some modification. About 10 mg of extracted fat sample (muscle and subcutaneous) was weighed by digital scale (KERN, Germany) and then was placed into screw cap test tube. Three replicates of each sample were taken. One mL n-heptane including internal standard (C12:1) was added to the samples and mixed. Then 0.2 mL of sodium methylate (25%) was added and the tube was put in a 50°C water bath for 10 minutes. After that, sample was cooled for about 5 minutes. Then 1.5 mL of freshly made methanolic HCl 10% (prepared by adding 20 mL of acetyl chloride to 100 mL of anhydrous methanol) was added and vortexed. The tube was put in a 90°C steam bath for 30 minutes and then the tube sample was cooled. Finally, three mL of 10% K2CO3 solution was added and mixed for one minute. The sample was centrifuged (Centrifuge 5415 R; Rotofix 32A, Germany) in 5 minutes at 5000 rpm. n-Heptane phase (upper phase) was transferred to the GC vial containing insert and analyzed (1.5 mL) using Pasteur pipettes.

2.4.2. Determination of Fatty Acid Profile

FAMEs were analyzed by gas chromatography equipped with flame ionization detection (GC-FID; HP 6890 chromatograph, Hewlett-Packard, Avondale, PA, USA) using capillary column (SP™-2560, Sigma-Aldrich) (100 m × 0.25 mm i.d., 0.2 μm df). Briefly, the oven temperature was initially 100°C (held for 5 minute), then increased at 3°C min−1 to 140°C (held for 20 minute), then increased at 8°C min−1 to 230°C (held for 10 minute), and finally increased at 6°C min−1 to 240°C (held for 8 minute). Hydrogen was used as the carrier gas at a flow rate of 1.0 mL·min−1. The inlet and detector temperatures were maintained at 250°C and 300°C, respectively, and 1 μL was injected by the GC-FID from the vial. Identification of common FA was accomplished by comparison of sample peak retention times with those of known FAME standard mixtures (SupelcoTM 37 component FAME Mix, Supelco-18919-1AMP, USA). Quantification of total FAME was done using 5-dodecenoic acid (12:1) as internal standard (NU-CHEK PREP, USA). Calibration curves were constructed from the analysis of the working standards in triplicate using the same GC conditions as those used for quantitative purposes. The concentration of FAMEs in the samples was determined using the area ratio and calibration plots. The result of the evaluation was the percentage (%) of total fatty acids (TFA).

2.5. Statistical Analysis

Results were analyzed by analysis of variance using the MIXED procedure of SAS (SAS Inst. Inc., Cary, NC, ver. 8.2). The difference between muscle and subcutaneous tissues FA composition based on pasture diet was assessed using a one-way ANOVA in a completely randomized design with repeated measures. The model included different tissues and the interaction between tissues as fixed effects and the random effect of animals and replication within treatment. The results were expressed as Least Squares Mean (LSM) and the standard error of the mean (SEM). The effects were declared to be significant at level . Descriptive statistics were used for animal traits and muscle chemical composition variables and the values were expressed as mean and standard deviation (SD).

3. Results

3.1. Carcass Characteristics

The characteristics of the animals used in the study are presented in Table 1.

3.2. Chemical Composition of Longissimus Muscle

The chemical composition (moisture, protein, and ash) of the muscle sample is summarized in Table 2.

3.3. Fatty Acid Composition of Subcutaneous Fat and Intramuscular Fat from Longissimus Muscle

Data referring to the total fat and fatty acid profile of LD muscle and subcutaneous fats (as % of total fatty acids) in nondescript deshi breed bulls are presented in Table 3. Highly significant differences exist between the LD muscle and subcutaneous tissues in terms of fat content (IMF, 2.78%; subcutaneous tissue, 69.83%; ). Subcutaneous adipose tissue had higher percentages of SFA (47.97 versus 40.64). Of the SFA, palmitic acid (C16:0) and stearic acid (C18:0) were found to be the dominant ones in both tissue samples. Lauric acid (C12:0), myristic acid (C14:0), and palmitic acid (C16:0) were found to be the dominant one in the subcutaneous tissue compared to the intramuscular fat (); however, no difference was seen between the two types of fat in stearic acid (C18:0) content. There was also no difference in terms of C18:1cis-9 (oleic acid; the major MUFA) content and interestingly the proportion of total MUFA in the subcutaneous tissue lipids was higher than the IMF (). C18:1cis-9 (oleic acid) was the major MUFA in both studied tissues, comprising 35.83% and 35.95% in IMF and subcutaneous fat, respectively.

IMF had higher percentages of PUFA than subcutaneous adipose tissue (13.90 versus 2.65) due to the higher percentage of the individual n-3 (C18:3n-3; C20:3n-3; C20:5n-3; and C22:6n-3) and n-6 (C18:2trans‐9, trans‐12; C18:2n-6; C18:3n-6; C20:2n-6; C20:3n-6; C20:4n-6; and C22:2n-6) fatty acids () (Table 3). The level of essential fatty acids (LA, C18:2n-6; ALA, C18:3n-3) is higher in IMF than the subcutaneous fat. The same statement is also true for arachidonic acid (C20:4n-6), EPA (C20:5n-3), DPA (22:5n-3), and DHA (C22:6n-3).

CLA proportion was higher in the subcutaneous fat than the muscle fat (0.85% versus 0.35%). Percentages of sum n-3 and n-6 PUFAs were significantly higher in the muscle fat compared to subcutaneous fat. IMF also showed higher value of PUFA ratio than the subcutaneous fat (2.10 versus 1.63). In subcutaneous fat there was high percentage of the VA (C18:1trans-11), (2.87%) compared to IMF (1.54%).

4. Discussion

Considering that the present study was first attempt at estimating the chemical and FA composition of Bangladeshi beef finished on pasture, no data was available for national level comparison. In many countries the IMF content <5% is considered as being “low in fat” meat [3]. Therefore, according to our findings (Table 3) longissimus dorsi muscle of nondescript deshi breed bulls of Bangladesh could be classified as lean meat. In concomitant with this, muscle tissue after removal of any visible fat (<5% fat) would normally satisfy for incorporation into a healthy diet. The chemical composition and IMF of Bangladeshi pastured beef (Tables 2 and 3) are close to most of the European, Australian, and American pastured beef [8, 1921].

Many studies have reported that replacing saturated fat and transfatty acids with unsaturated fat, especially n-3 fatty acids, is more effective in lowering the risk of coronary heart disease than simply reducing total fat consumption [22]. Feeding strategies that lead to a decrease in saturated fat and enhancing the n-3 PUFAs of intramuscular fat would produce the beef of more positive nutritional value. Several studies have reported that dietary fat content of the animals is the major factor primarily causing the changes of FA composition in the meat and adipose fat [19]. Beef cattles raised on grass or pasture feeding are considered to have lean meat together with FA composition suitable for human nutrition [19].

In our study, the predominant fatty acids in both the IMF and subcutaneous fat were C16:0 and C18:0 as SFA, C18:1cis-9 as MUFA, and C18:2n-6 as PUFA which is an agreement with the results found by Poulson et al. [23] who studied the FA profile of steers raised on grass feeding. Nevertheless, the comparison of results is difficult because FA profiles are affected by breed, sex, level of fatness, and slaughter age besides the feeding method [8].

In this study, we observed a significant depot effect on the FA composition. IMF displayed significantly lower percentages of C12:0, C14:0, C15:0, C16:0, SFA, and MUFA and greater percentages of C18:2n-6, C18:3n-3, C18:3n-6, C20:4n-6, C20:5n-3, C22:5n-3, C22:6n-3, PUFA, and total n-3 PUFA, total n-6 PUFA, and PUFA/SFA and PUFA ratios compared with samples from subcutaneous fat which is in concomitant with the findings of Aldai et al. [24]. In contrast, Webb et al. [25] found higher percentages of SFA in lipids of muscle tissue compared with subcutaneous fat. In both of these studies, authors reported higher level of C18:0 in subcutaneous fat than IMF but we did not observe this trend in our study. High MUFA proportion in the subcutaneous fat compared to the IMF has been previously stated and may be the result of elevated stearoyl-CoA-Δ9-desaturase activity which converts C14:0, C16:0, and C18:0 to their corresponding MUFAs [26].

The subcutaneous fat showed greater percentages of CLA than IMF (0.85 versus 0.35), which is in agreement with the results obtained by Aldai et al. [24]. CLA values were similar to those obtained from pasture systems and higher than those obtained in feedlots systems [27, 28].

PUFA percentage in IMF was significantly greater () than in subcutaneous adipose tissue and this is documented in the comparatively high contents of n-6 and n-3 PUFAs but not for CLA. Previous studies also reported the similar result [24, 29, 30]. The reason for this may be the preferable incorporation of long chain n-3 fatty acids from pasture into muscle tissue (polar lipids) compared to subcutaneous tissue (neutral lipids) [31]. This study also demonstrated that pasture diet resulted in increase in EPA, DPA, and DHA percentages in muscle tissue but not in subcutaneous tissue. Moreover, the smaller adipocyte size and a higher ratio of phospholipid to neutral lipid have also been indicated for increased PUFA content in IMF than subcutaneous adipose tissue fat [24].

Aldai et al. [24] reported that n-6/n-3 PUFAs ratio is significantly higher in IMF than the subcutaneous fat and we also found similar result in this study (2.10 versus 1.63; ).

PUFA/SFA and n-6/n-3 PUFAs ratios are frequently used to evaluate the nutritional value and consumer health of IMF. However, an index such as PUFA/SFA may not be a suitable indicator to assess the nutritional value of fat because some SFAs do not elevate plasma cholesterol and overlook the effects of MUFAs [32]. UK department of health [33] recommended that the PUFA/SFA and n-6/n-3 PUFAs ratios in meat should be around 0.45 and <4, respectively. Therefore, our findings in this study were significantly lower than the recommended values [33]. However, the PUFA/SFA ratio for beef is typically low at around 0.1 [34] and the value is about 0.5–0.7 for double muscled animals as meat from these animals generally has very low IMF (<1%) [25, 35]. Besides the IMF, FA composition is also different in double muscled animals compared to nondouble muscled animals. Typically, double muscled animals have higher concentration of PUFA and lower concentration of SFA, thereby having higher PUFA/SFA ratio compared to nondouble muscled counterparts [25, 35]. Double muscled animals also showed different pattern of metabolism of n-6 and n-3 PUFAs; especially the deposition rate of n-3 fatty acids in these animals is greater than the nondouble muscled animals.

5. Conclusion

The effect of pasture feeding on the FA profile of beef may not be generalized easily as it appears that numerous meat FAs are affected by both breed and type of grass. As little information was available on the nutrient content and FA composition of Bangladeshi beef, the results of this study contribute considerably to much needed information on the FA composition of grass fed beef in Bangladesh.

Conflicts of Interest

The authors declare that they have no conflicts of interest.