Table of Contents Author Guidelines Submit a Manuscript
Journal of Chemistry
Volume 2017 (2017), Article ID 9560293, 10 pages
https://doi.org/10.1155/2017/9560293
Research Article

3-Mercaptopropyltrimethoxysilane Modified Diatomite: Preparation and Application for Voltammetric Determination of Lead (II) and Cadmium (II)

1College of Science, Hue University, Hue City 530000, Vietnam
2Faculty of Technology, Industrial University of Ho Chi Minh City, Quang Ngai Campus, Quang Ngai City 570000, Vietnam
3Faculty of Natural Science, Thu Dau Mot University, Thu Dau Mot City 590000, Vietnam
4Department of Agriculture and Rural Development, Tam Ky City, Quang Nam Province 560000, Vietnam

Correspondence should be addressed to Dinh Quang Khieu; nv.ude.inueuh@ueihkqd

Received 11 September 2016; Revised 15 January 2017; Accepted 15 February 2017; Published 14 March 2017

Academic Editor: Pedro Ávila-Pérez

Copyright © 2017 Dinh Quang Khieu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Cui, Y. Wang, L. Gao et al., “EDTA functionalized magnetic graphene oxide for removal of Pb(II), Hg(II) and Cu(II) in water treatment: adsorption mechanism and separation property,” Chemical Engineering Journal, vol. 281, pp. 1–10, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. F. A. Aydin and M. Soylak, “Separation, preconcentration and inductively coupled plasma-mass spectrometric (ICP-MS) determination of thorium(IV), titanium(IV), iron(III), lead(II) and chromium(III) on 2-nitroso-1-naphthol impregnated MCI GEL CHP20P resin,” Journal of Hazardous Materials, vol. 173, no. 1-3, pp. 669–674, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Otero-Romaní, A. Moreda-Piñeiro, P. Bermejo-Barrera, and A. Martin-Esteban, “Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction,” Talanta, vol. 79, no. 3, pp. 723–729, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Ndung'u, S. Hibdon, and A. R. Flegal, “Determination of lead in vinegar by ICP-MS and GFAAS: evaluation of different sample preparation procedures,” Talanta, vol. 64, no. 1, pp. 258–263, 2004. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Maghear, M. Etienne, M. Tertiş, R. Sandulescu, and A. Walcarius, “Clay-mesoporous silica composite films generated by electro-assisted self-assembly,” Electrochimica Acta, vol. 112, pp. 333–341, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. M. M. Abdel-Galeil, M. M. Ghoneim, H. S. El-Desoky, T. Hattori, and A. Matsuda, “Anodic stripping voltammetry determination of lead ions using highly sensitive modified electrodes based on multi-walled carbon nanotube,” Journal of Chemistry and Biochemistry, vol. 2, no. 2, 2014. View at Publisher · View at Google Scholar
  7. P. Zhang, S. Dong, G. Gu, and T. Huang, “Simultaneous determination of Cd2+, Pb2+, Cu2+ and Hg2+ at a carbon paste electrode modified with ionic liquid-functionalized ordered mesoporous silica,” Bulletin of the Korean Chemical Society, vol. 31, no. 10, pp. 2949–2954, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Sánchez, S. Morante-Zarcero, D. Pérez-Quintanilla, I. Sierra, and I. Del Hierro, “Determination of Hg(II) in natural waters using a carbon paste electrode modified with hybrid mesostructured silica nanoparticles,” Sensors and Actuators, B: Chemical, vol. 163, no. 1, pp. 38–43, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. P. Kula, Z. Navrátilová, P. Kulová, and M. Kotoucek, “Sorption and determination of Hg(II) on clay modified carbon paste electrodes,” Analytica Chimica Acta, vol. 385, no. 1-3, pp. 91–101, 1999. View at Publisher · View at Google Scholar · View at Scopus
  10. Z. Navrátilová and P. Kula, “Clay modified electrodes: present applications and prospects,” Electroanalysis, vol. 15, no. 10, pp. 837–846, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. Al-Degs, M. A. M. Khraisheh, and M. F. Tutunji, “Sorption of lead ions on diatomite and manganese oxides modified diatomite,” Water Research, vol. 35, no. 15, pp. 3724–3728, 2001. View at Publisher · View at Google Scholar · View at Scopus
  12. M. A. Al-Ghouti, M. A. M. Khraisheh, S. J. Allen, and M. N. Ahmad, “The removal of dyes from textile wastewater: a study of the physical characteristics and adsorption mechanisms of diatomaceous earth,” Journal of Environmental Management, vol. 69, no. 3, pp. 229–238, 2003. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Zhang, T. Ding, Z. Zhang, L. Xu, and C. Zhang, “Enhanced adsorption of trivalent arsenic from water by functionalized diatom silica shells,” PLoS ONE, vol. 10, no. 4, Article ID e0123395, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Yu, J. Addai-Mensah, and D. Losic, “Functionalized diatom silica microparticles for removal of mercury ions,” Science and Technology of Advanced Materials, vol. 13, no. 1, Article ID 015008, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. I. K. Tonlé, E. Ngameni, H. L. Tcheumi, V. Tchiéda, C. Carteret, and A. Walcarius, “Sorption of methylene blue on an organoclay bearing thiol groups and application to electrochemical sensing of the dye,” Talanta, vol. 74, no. 4, pp. 489–497, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Zhang, L. Zeng, L. Han et al., “Ultrasensitive electrochemical sensor for p-nitrophenyl organophosphates based on ordered mesoporous carbons at low potential without deoxygenization,” Analytica Chimica Acta, vol. 822, pp. 23–29, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. G. Rytwo, D. Tropp, and C. Serban, “Adsorption of diquat, paraquat and methyl green on sepiolite: experimental results and model calculations,” Applied Clay Science, vol. 20, no. 6, pp. 273–282, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. R. A. Shawabkeh and M. F. Tutunji, “Experimental study and modeling of basic dye sorption by diatomaceous clay,” Applied Clay Science, vol. 24, no. 1-2, pp. 111–120, 2003. View at Publisher · View at Google Scholar · View at Scopus
  19. M. A. M. Khraisheh, M. A. Al-Ghouti, S. J. Allen, and M. N. Ahmad, “Effect of OH and silanol groups in the removal of dyes from aqueous solution using diatomite,” Water Research, vol. 39, no. 5, pp. 922–932, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. P. Yuan, D. Q. Wu, H. P. He, and Z. Y. Lin, “The hydroxyl species and acid sites on diatomite surface: a combined IR and Raman study,” Applied Surface Science, vol. 227, no. 1–4, pp. 30–39, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. U. Johansson, A. Holmgren, W. Forsling, and R. L. Frost, “Adsorption of silane coupling agents onto kaolinite surfaces,” Clay Minerals, vol. 34, no. 2, pp. 239–246, 1999. View at Publisher · View at Google Scholar · View at Scopus
  22. Z. Wu, C. Xu, H. Chen et al., “Mesoporous MgO nanosheets: 1,6-hexanediamin-assisted synthesis and their applications on electrochemical detection of toxic metal ions,” Journal of Physics and Chemistry of Solids, vol. 74, no. 7, pp. 1032–1038, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. C. Hu, K. Wu, X. Dai, and S. Hu, “Simultaneous determination of lead(II) and cadmium(II) at a diacetyldioxime modified carbon paste electrode by differential pulse stripping voltammetry,” Talanta, vol. 60, no. 1, pp. 17–24, 2003. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Ramezani, M. Ghobadi, and B. N. Bideh, “Voltammetric monitoring of Cd (II) by nano-TiO2 modified carbon paste electrode sensitized using 1,2-bis-[o-aminophenyl thio] ethane as a new ion receptor,” Sensors and Actuators, B: Chemical, vol. 192, pp. 648–657, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. D. Yang, L. Wang, Z. Chen, M. Megharaj, and R. Naidu, “Anodic stripping voltammetric determination of traces of Pb(II) and Cd(II) using a glassy carbon electrode modified with bismuth nanoparticles,” Microchimica Acta, vol. 181, no. 11-12, pp. 1199–1206, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. X. Xu, G. Duan, Y. Li et al., “Fabrication of gold nanoparticles by laser ablation in liquid and their application for simultaneous electrochemical detection of Cd2+, Pb2+, Cu2+, Hg2+,” ACS Applied Materials and Interfaces, vol. 6, no. 1, pp. 65–71, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. E. A. Khudaish, M. M. Al-Hinaai, and S. H. Al-Harthi, “A solid-state sensor based on tris(2,2′-bipyridyl)ruthenium(II)/poly(4-aminodiphenylamine) modified electrode: characterization and applications,” Sensors and Actuators, B: Chemical, vol. 185, pp. 478–487, 2013. View at Publisher · View at Google Scholar · View at Scopus