Table of Contents
Journal of Coatings
Volume 2013, Article ID 519416, 6 pages
http://dx.doi.org/10.1155/2013/519416
Research Article

Effect of Testing Rate on Adhesion Properties of Acrylonitrile-Butadiene Rubber/Standard Malaysian Rubber Blend-Based Pressure-Sensitive Adhesive

School of Industrial Technology, Universiti Sains Malaysia, Minden, 11800 Penang, Malaysia

Received 23 May 2013; Revised 6 September 2013; Accepted 18 September 2013

Academic Editor: Fahmina Zafar

Copyright © 2013 B. T. Poh and Junidah Lamaming. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Satas, Ed., Handbook of Pressure-Sensitive Adhesive Technology, Van Nostrand Reinhold, New York, NY, USA, 1982.
  2. I. Rezaeian, P. Zahedi, and A. Rezaeian, “Rubber adhesion to different substrates and its importance in industrial applications: a review,” Journal of Adhesion Science and Technology, vol. 26, pp. 721–744, 2012. View at Publisher · View at Google Scholar
  3. S. Riyajan and N. Pheweaw, “Modification of skim rubber blended with poly (vinyl alcohol) to be applied as a biodegradable pressure-sensitive adhesive: effect of 2,6-DI-T-butyl-4-methylphenol and hydrocarbon resin,” Rubber Chemistry and Technology, vol. 85, pp. 547–558, 2012. View at Publisher · View at Google Scholar
  4. O. Stephen, R. Fatima, and A. A. Ikechukwu, “Adhesive formulations with ternary blends using simplex lattice design,” International Journal of Physical Sciences, vol. 5, no. 13, pp. 2098–2103, 2010. View at Google Scholar · View at Scopus
  5. A. Thitithammawong, N. Ruttanasupa, and C. Nakason, “Preparation and properties of chlorinated epoxidised natural rubber latex and its latex-based adhesive,” Journal of Rubber Research, vol. 15, no. 1, pp. 19–34, 2012. View at Google Scholar · View at Scopus
  6. S. B. Neoh, X. M. Lee, A. R. Azura, and A. S. Hashim, “Effect of in situ polymerization of styrene onto natural rubber on adhesion properties of styrene-natural rubber (SNR) adhesives,” Journal of Adhesion, vol. 86, no. 8, pp. 857–871, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. B. T. Poh and C. F. Gan, “Viscosity and peel strength of magnesium oxide-filled adhesive prepared from epoxidized natural rubber (ENR 25),” Polymer-Plastics Technology and Engineering, vol. 49, pp. 191–194, 2010. View at Publisher · View at Google Scholar
  8. I. Khan and B. T. Poh, “The effect of silica on the peel adhesion of epoxidized natural rubber-based adhesive containing coumarone-indene resin,” Polymer-Plastics Technology and Engineering, vol. 49, pp. 1356–1360, 2010. View at Publisher · View at Google Scholar
  9. I. Khan, B. T. Poh, and C. M. Badriah, “Effect of sodium sulfate on the viscosity, tack, and adhesion properties of SMR 10-based pressure-sensitive adhesive,” Journal of Elastomers and Plastics, vol. 43, no. 1, pp. 85–95, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. J. P. Phillips, X. Deng, R. R. Stephen et al., “Nano- and bulk-tack adhesive properties of stimuli-responsive, fullerene-polymer blends, containing polystyrene-block-polybutadiene-block-polystyrene and polystyrene-block-polyisoprene-block-polystyrene rubber-based adhesives,” Polymer, vol. 48, no. 23, pp. 6773–6781, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. J. P. Phillips, X. Deng, M. L. Todd et al., “Singlet oxygen generation and adhesive loss in stimuli-responsive, fullerene-polymer blends, containing polystyrene-block-polybutadiene-block- polystyrene and polystyrene-block-polyisoprene-block-polystyrene rubber-based adhesives,” Journal of Applied Polymer Science, vol. 109, no. 5, pp. 2895–2904, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. W. Smitthipong, M. Nardin, J. Schultz, and K. Suchiva, “Adhesion and self-adhesion of immiscible rubber blends,” International Journal of Adhesion and Adhesives, vol. 29, no. 3, pp. 253–258, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. B. T. Poh and L. N. Ong, “Adhesion properties of styrene-butadiene rubber (SBR)/ Standard Malaysian Rubber (SMR L)-based adhesives in the presence of phenol formaldehyde resin,” eXPRESS Polymer Letters, vol. 1, pp. 654–659, 2007. View at Publisher · View at Google Scholar
  14. B. T. Poh and S. S. Heng, “Effect of blend ratio on adhesion properties of pressure-sensitive adhesives prepared from SBR/SMR L blends,” Polymer-Plastics Technology and Engineering, vol. 47, pp. 325–329, 2008. View at Publisher · View at Google Scholar
  15. B. T. Poh and A. L. Lim, “Adhesion properties of pressure-sensitive adhesives prepared from SMR 10/ENR 25, SMR 10/ENR 50, and ENR 25/ENR 50 blends,” Journal of Applied Polymer Science, vol. 109, pp. 115–119, 2008. View at Publisher · View at Google Scholar
  16. B. T. Poh and I. Khan, “Effect of test rate on adhesion properties of SMR L, ENR-25 and ENR-50-based pressure-sensitive adhesives effect of test rate on adhesion properties of SMR L, ENR-25 and ENR-50-based pressure-sensitive adhesives,” Journal of Adhesion Science and Technology, vol. 26, no. 6, pp. 873–881, 2012. View at Google Scholar
  17. I. Khan and B. T. Poh, “Natural rubber-based pressure-sensitive adhesives: a review,” Journal of Polymers and the Environment, vol. 19, no. 3, pp. 793–811, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. C. K. L. Davies, S. V. Wolfe, I. R. Gelling, and A. G. Thomas, “Strain crystallization in random copolymers produced by epoxidation of cis 1,4-polyisoprene,” Polymer, vol. 24, no. 1, pp. 107–113, 1983. View at Google Scholar · View at Scopus
  19. G. Gierenz and W. Karmann, Eds., Adhesive and Adhesive Tapes, Wiley-VCH, New York, NY, USA, 2001.
  20. L. H. Lee, Adhesive Bonding, Plenum Press, New York, NY, USA, 1991.
  21. I. Skeist, Ed., Handbook of Adhesives, Van Nostrand Reinhold, New York, NY, USA, 3rd edition, 1990.