Table of Contents
Journal of Coatings
Volume 2013 (2013), Article ID 842865, 7 pages
http://dx.doi.org/10.1155/2013/842865
Research Article

Evaluation and Characterization of Plasma Sprayed Cu Slag-Al Composite Coatings on Metal Substrates

1CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha 751013, India
2National Institute of Technology, Rourkela, Odisha 769008, India

Received 3 October 2013; Accepted 21 November 2013

Academic Editor: Fahmina Zafar

Copyright © 2013 S. Mantry et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Westergård, L. C. Erickson, N. Axén, H. M. Hawthorne, and S. Hogmark, “The erosion and abrasion characteristics of alumina coatings plasma sprayed under different spraying conditions,” Tribology International, vol. 31, no. 5, pp. 271–279, 1998. View at Google Scholar · View at Scopus
  2. L. Dubourg, R. S. Lima, and C. Moreau, “Properties of alumina-titania coatings prepared by laser-assisted air plasma spraying,” Surface and Coatings Technology, vol. 201, no. 14, pp. 6278–6284, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. Z. Yin, S. Tao, X. Zhou, and C. Ding, “Tribological properties of plasma sprayed Al/Al2O3 composite coatings,” Wear, vol. 263, no. 7–12, pp. 1430–1437, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. R. B. Heiman, Plasma Spray Coating, Principles and Applied Materials, John Wiley, New York, NY, USA, 1989.
  5. B. H. Robert, Plasma Sprayed Coatings; Principles and Applications, VCH, New York, NY, USA, 1996.
  6. D. Maejka and B. Benko, Plasma Spraying of Metallic and Ceramic Materials, John Wiley, New York, NY, USA, 1989.
  7. C. T. Liu and C. L. White, “Design of ductile polycrystalline Ni3Al alloys,” in Proceedings of the Symposium on High Temperature Ordered Intermetallic Alloys, C. C. Koch, C. T. Liu, and N. S. Stoloff, Eds., vol. 39, pp. 365–380, Materials Research Society, Warrendale, PA, USA, 1985.
  8. R. W. Cahn, “Load-bearing ordered intermetallic compounds—a historical view,” MRS Bulletin, vol. 5, article 18, 1991. View at Google Scholar
  9. J. Z. Chen, H. Herman, and S. Safai, “Evaluation of NiAl and NiAl-B deposited by vacuum plasma spray,” Journal of Thermal Spray Technology, vol. 2, article 357, 1993. View at Google Scholar
  10. S. C. Mishra, S. Das, A. Satapathy, S. Sarkar, P. V. Ananthapadmanabhan, and K. P. Sreekumar, “Investigation on composite coating of low grade minerals,” Journal of Reinforced Plastics and Composites, vol. 28, no. 24, pp. 3061–3067, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. K. Al-Jabri, R. Taha, and M. Al-Ghassani, “Use of copper slag and cement by-pass dust as cementitious materials,” Cement, Concrete and Aggregates, vol. 24, no. 1, pp. 7–12, 2002. View at Google Scholar · View at Scopus
  12. B. Gorai, R. K. Jana, and P. Premchand, “Characteristics and utilisation of copper slag—a review,” Resources, Conservation and Recycling, vol. 39, no. 4, pp. 299–313, 2003. View at Publisher · View at Google Scholar · View at Scopus
  13. S. C. Mishra, K. C. Rout, P. V. A. Padmanabhan, and B. Mills, “Plasma spray coating of fly ash pre-mixed with aluminium powder deposited on metal substrates,” Journal of Materials Processing Technology, vol. 102, no. 1, pp. 9–13, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. C. R. C. Lima and R.-E. Trevisan, “Graded plasma spraying of premixed metal-ceramic powders on metallic substrates,” Journal of Thermal Spray Technology, vol. 6, no. 2, pp. 199–204, 1997. View at Google Scholar · View at Scopus
  15. S. P. Sahu, A. Satapathy, A. Patnaik, K. P. Sreekumar, and P. V. Ananthapadmanabhan, “Development, characterization and erosion wear response of plasma sprayed fly ash-aluminum coatings,” Materials and Design, vol. 31, no. 3, pp. 1165–1173, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Satapathy, S. P. Sahu, and D. Mishra, “Development of protective coatings using fly ash premixed with metal powder on aluminium substrates,” Waste Management and Research, vol. 28, no. 7, pp. 660–666, 2010. View at Publisher · View at Google Scholar
  17. H. Ageorges and P. Fauchais, “Plasma spraying of stainless-steel particles coated with an alumina shell,” Thin Solid Films, vol. 370, no. 1, pp. 213–222, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. S. C. Mishra, A. Satapathy, P. V. Ananthapadmanabhan, and K. P. Sreekumar, “Plasma spray coating of red mud on metals,” in Proceedings of Symposium on Power Beams and Materials Processing, pp. 709–712, 2002.
  19. A. Satapathy, Thermal spray coating of red mud on metals [Ph.D. thesis], National Institute of Technology, Rourkela, India, 2006.
  20. A. Satapathy, S. C. Mishra, P. V. Ananthapadmanabhan, and K. P. Sreekumar, “Development of ceramic coatings using redmud—a solid waste of alumina plants,” Journal of Solid Waste Technology and Management, pp. 48–53, 2007. View at Google Scholar
  21. L. Powloski, The Science and Engineering of Thermal Spraying, Willey, 1995.