Table of Contents
Journal of Coatings
Volume 2014 (2014), Article ID 659697, 10 pages
http://dx.doi.org/10.1155/2014/659697
Research Article

Studies on the Codeposition of SiC Nanopowder with Nickel, Cobalt, and Co-Ni Alloys

Department of Physical Chemistry and Metallurgy of Non-Ferrous Metals, Faculty of Non-Ferrous Metals, AGH University of Science and Technology, Aleja Mickiewicza 30, 30-059 Cracow, Poland

Received 5 February 2014; Revised 3 July 2014; Accepted 14 July 2014; Published 23 July 2014

Academic Editor: Fahmina Zafar

Copyright © 2014 Ewa Rudnik and Sławomir Syrek. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. C. Walsh and C. Ponce de Leon, “A review of the electrodeposition of metal matrix composite coatings by inclusion of particles in a metal layer: an established and diversifying technology,” Transactions of the IMF, vol. 92, no. 2, pp. 83–98, 2014. View at Publisher · View at Google Scholar
  2. C. T. J. Low, R. G. A. Wills, and F. C. Walsh, “Electrodeposition of composite coatings containing nanoparticles in a metal deposit,” Surface and Coatings Technology, vol. 201, no. 1-2, pp. 371–383, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. I. Garcia, A. Conde, G. Langelaan, J. Fransaer, and J. P. Celis, “Improved corrosion resistance through microstructural modifications induced by codepositing SiC-particles with electrolytic nickel,” Corrosion Science, vol. 45, no. 6, pp. 1173–1189, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Bund and D. Thiemig, “Influence of bath composition and pH on the electrocodeposition of alumina nanoparticles and nickel,” Surface and Coatings Technology, vol. 201, no. 16-17, pp. 7092–7099, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. C. Cai, X. B. Zhu, G. Q. Zheng et al., “Electrodeposition and characterization of nano-structured Ni-SiC composite films,” Surface and Coatings Technology, vol. 205, no. 11, pp. 3448–3454, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. H. K. Lee and J. Y. Jeon, “Codeposition of micro- and nano-sized SiC particles in the nickel matrix composite coatings obtained by electroplating,” Surface and Coatings Technology, vol. 201, no. 8, pp. 4711–4717, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. B. J. Hwang and C. S. Hwang, “Mechanism of codeposition of silicon carbide with electrolytic cobalt,” Journal of the Electrochemical Society, vol. 140, no. 4, pp. 979–984, 1993. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Cârâc, A. Bund, and D. Thiemig, “Electrocodeposition and characterization of cobalt lanthanide oxides composite coatings,” Surface and Coatings Technology, vol. 202, pp. 403–411, 2007. View at Publisher · View at Google Scholar
  9. G. N. K. Ramesh Bapu and T. Thiruchelvam, “Electrodeposited cobalt-boron nitride composites,” Bulletin of Electrochemistry, vol. 17, no. 12, pp. 529–534, 2001. View at Google Scholar
  10. M. Srivastava Sr., V. K. W. Grips, A. Jain, and K. S. Rajam, “Influence of SiC particle size on the structure and tribological properties of Ni-Co composites,” Surface and Coatings Technology, vol. 202, no. 2, pp. 310–318, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. G. Wu, N. Li, D. Zhou, and K. Mitsuo, “Electrodeposited Co-Ni-Al2O3 composite coatings,” Surface and Coatings Technology, vol. 176, no. 2, pp. 157–164, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Bahadormanesh, A. Dolati, and M. R. Ahmadi, “Electrodeposition and characterization of Ni-Co/SiC nanocomposite coatings,” Journal of Alloys and Compounds, vol. 509, no. 39, pp. 9406–9412, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. X. Y. Yang, K.-J. Li, X. Peng, and F. H. Wang, “Beneficial effects of Co2+ on co-electrodeposited Ni-SiC nanocomposite coating,” Transactions of Nonferrous Metals Society of China, vol. 19, pp. 119–124, 2009. View at Publisher · View at Google Scholar
  14. L. Burzyńska, E. Rudnik, J. Koza, L. Błaż, and W. Szymański, “Electrodeposition and heat treatment of nickel/silicon carbide composites,” Surface and Coatings Technology, vol. 202, no. 12, pp. 2545–2556, 2008. View at Publisher · View at Google Scholar
  15. E. Rudnik, L. Burzyńska, and M. Gut, “The effect of Cs+ ions on codeposition of SiC particles with nickel,” Materials Chemistry and Physics, vol. 126, pp. 573–579, 2011. View at Publisher · View at Google Scholar
  16. E. Rudnik, L. Burzyńska, Ł. Dolasiński, and M. Misiak, “Electrodeposition of nickel/SiC composites in the presence of cetyltrimethylammonium bromide,” Applied Surface Science, vol. 256, no. 24, pp. 7414–7420, 2010. View at Publisher · View at Google Scholar
  17. E. Rudnik, L. Burzyńska, J. Jędruch, and L. Błaż, “Codeposition of SiC particles with electrolytic cobalt in the presence of Cs+ ions,” Applied Surface Science, vol. 255, no. 16, pp. 7164–7171, 2009. View at Publisher · View at Google Scholar
  18. E. Rudnik, L. Burzyńska, and M. Gębka, “Influence of CTAB cationic surfactant on codeposition of SiC particles with cobalt,” Transactions of the Institute of Metal Finishing, vol. 89, no. 1, pp. 33–38, 2011. View at Publisher · View at Google Scholar
  19. E. Rudnik, “Influence of Cs+ ions on codeposition of SiC particles with Ni–Co alloy,” Transactions of the Institute of Metal Finishing, vol. 87, no. 5, pp. 239–245, 2009. View at Publisher · View at Google Scholar
  20. L. Shi, C. Sun, P. Gao, F. Zhou, and W. Liu, “Mechanical properties and wear and corrosion resistance of electrodeposited Ni-Co/SiC nanocomposite coating,” Applied Surface Science, vol. 252, no. 10, pp. 3591–3599, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. M. R. Vaezi, S. K. Sadrnezhaad, and L. Nikzad, “Electrodeposition of Ni-SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 315, no. 1–3, pp. 176–182, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. S. C. Wang and W. C. J. Wei, “Kinetics of electroplating process of nano-sized ceramic particle/Ni composite,” Materials Chemistry and Physics, vol. 78, pp. 574–580, 2003. View at Publisher · View at Google Scholar
  23. A. Brenner, Electrodeposition of Alloys, vol. 1-2, Academic Press, London, UK, 1963.
  24. L. S. Čerović, S. K. Milonjić, M. B. Todorović et al., “Point of zero charge of different carbides,” Colloids and Surfaces A, vol. 297, pp. 1–6, 2007. View at Google Scholar
  25. G. Vidrich, J.-F. Castagnet, and H. Ferkel, “Dispersion behavior of Al2O3 and SiO2 nanoparticles in nickel sulfamate plating baths of different compositions,” Journal of the Electrochemical Society, vol. 152, no. 5, pp. C294–C297, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. A. Grosjean, M. Rezrazi, and M. Tachez, “Study of the surface charge of silicon carbide (SiC) particles for electroless composite deposits: Nickel-SiC,” Surface and Coatings Technology, vol. 96, no. 2-3, pp. 300–304, 1997. View at Publisher · View at Google Scholar · View at Scopus
  27. G. Wu, N. Li, D. L. Wang, D. R. Zhou, B. Q. Xu, and K. Mitsuo, “Effect of α-Al2O3 particles on the electrochemical codeposition of Co-Ni alloys from sulfamate electrolytes,” Materials Chemistry and Physics, vol. 87, no. 2-3, pp. 411–419, 2004. View at Publisher · View at Google Scholar